COWSAR Countertop Ice Cube Maker

導入

Thank you for choosing the COWSAR Countertop Ice Cube Maker. This portable ice machine is designed to provide a convenient and efficient way to produce ice cubes for your home, office, or gatherings. With its rapid ice-making capabilities, user-friendly controls, and self-cleaning function, it aims to enhance your daily life with readily available ice.

Figure 1: COWSAR Countertop Ice Cube Maker

主な特徴

• 急速製氷: Produces 16 ice cubes every 13 minutes, up to 13 kilograms (30 LBS) of ice per day.
• 大容量: Features a 1.8-pound ice storage capacity.
• 簡単操作: User-friendly control panel with clear indicator icons for water level and ice bucket status. Includes a free ice scoop.
• セルフクリーニング機能: Automatic 20-minute self-cleaning cycle initiated by pressing the "+" button for 5 seconds or more. Equipped with a drainage hole.
• 氷の厚さを調整可能: Customize ice cube thickness by adjusting the ice-making time.
• 24時間タイマー機能： Conveniently schedule ice production.
• Two Water Adding Modes: Can hold up to 2 liters of water, with options for external water tank (1.5L) or direct top water tank (0.5L) filling. Water inlet includes a dust cover.

Figure 2: Efficient Ice Making Capabilities

箱の中身

• COWSAR Countertop Ice Cube Maker
• アイススクープ

設定

1. 開梱: Carefully remove the ice maker and all accessories from the packaging. Retain packaging for future transport or storage.
2. 配置: 製氷機は、直射日光や熱源を避け、安定した平らな場所に設置してください。機器の周囲に十分な換気を確保してください。
3. 初期クリーニング: Before first use, clean the interior of the ice maker, including the water tank and ice basket, with a soft cloth and mild detergent. Rinse thoroughly with clean water.
4. 水を加える： Fill the water tank with clean, pure water. You can use the external 1.5L water tank or directly fill the 0.5L top water tank. Do not exceed the maximum fill line.

Figure 3: Two Ways of Adding Water

手術

1. 電源オン: Plug the ice maker into a grounded electrical outlet. Press the ON/OFF button on the intelligent digital panel to turn on the unit.
2. 製氷工程: The machine will automatically begin the ice-making cycle. The indicator lights on the control panel will show the current status.
3. 氷の厚さの調整： Use the "+/-" buttons on the control panel to adjust the ice-making time, which in turn changes the thickness of the ice cubes. Shorter times produce thinner ice, longer times produce thicker ice.
   • Thin Ice: Approximately 11 minutes
   • Medium Ice: Approximately 15 minutes
   • Thick Ice: Approximately 20 minutes

Figure 4: Adjustable Ice Cube Thickness

4. タイマー機能: Utilize the timer setting on the control panel to program the ice maker to start or stop at a specific time within a 1-24 hour period.

Figure 5: 1-24 Hour Timing Setting

5. 氷コレクション: When the ice basket is full, the "Ice Full" indicator will illuminate, and the machine will pause. Remove ice as needed using the provided scoop.

Figure 6: Intelligent Digital Control Panel

メンテナンス

1. セルフクリーニング機能: To activate the self-cleaning cycle, ensure there is water in the tank, then press and hold the "+" button for 5 seconds or more. The cycle will run for 20 minutes.

Figure 7: Automatic Self-Cleaning Function

2. 水抜き： The unit is equipped with a drainage hole to facilitate quick draining of melted water. Ensure to drain the unit regularly, especially before storage or extended periods of non-use.
3. Cleaning Water Separator Pipe: If the water separator pipe is blocked and no water flows down when the compressor and water pump are working, clean each hole on the pipe as shown in the diagram.

Figure 8: Water Separator Pipe Cleaning

4. 一般的な清掃: 定期的に柔らかい布で外側を拭いてください。amp cloth. For interior cleaning, use a mild, food-safe cleaning solution and rinse thoroughly.

トラブルシューティング

• "Add Water" Indicator On: This indicates that the water level in the tank is low. Refill the water tank as described in the Setup section.
• "Ice Full" Indicator On: The ice basket is full. Remove some ice cubes to allow the machine to resume production.
• Unusual Loud Noise: If the machine starts making loud noises, especially after some use, it may indicate an issue with internal components. Ensure the unit is on a stable surface and that the water separator pipe is not blocked. If the issue persists, contact customer support.
• 氷生成なし: Check if the water tank is filled, the unit is powered on, and the ambient temperature is within the recommended operating range. Ensure the water separator pipe is clear.

仕様

保証とサポート

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact COWSAR customer service directly. Keep your purchase receipt for warranty validation.