Circrane AZ-001 Solar Wireless Pool Thermometer User Manual

導入

Thank you for choosing the Circrane AZ-001 Solar Wireless Pool Thermometer. This device is designed to provide accurate and convenient water temperature readings for various applications, including swimming pools, hot tubs, ice baths, and aquariums. Featuring solar power, a clear digital display, and IPX8 waterproofing, this thermometer ensures reliable performance and ease of use. Please read this manual thoroughly before operation to ensure proper setup and optimal functionality.

パッケージ内容

• 1 x Circrane Solar Wireless Pool Thermometer (Transmitter)
• 1 x Thermometer Monitor (Receiver)
• 1 x USB-C充電ケーブル
• ユーザーマニュアル x 1

製品終了view

The Circrane AZ-001 system consists of two main components: the floating pool thermometer (transmitter) and the indoor monitor (receiver). The transmitter measures water temperature and transmits it wirelessly to the receiver, which displays both water and indoor temperatures.

Image 1: The Circrane Solar Wireless Pool Thermometer (left) and its indoor receiver (right).

Transmitter (Pool Thermometer)

• ソーラーパネル: Charges the internal lithium-ion battery.
• デジタルディスプレイ： Shows current water temperature.
• 機能ボタン: Used for power on/off and switching temperature units.
• USB-Cポート： For alternative charging.
• IPX8防水性： 水中に連続して浸漬できるように設計されています。

Receiver (Indoor Monitor)

• LCDディスプレイ: Shows water temperature (OUT) and indoor temperature (IN).
• ボタン: For setting temperature units, viewing MAX/MIN records, and channel selection.
• バッテリーコンパートメント: For AAA batteries (included).

画像2: 詳細 view of the transmitter and receiver displays, indicating various indicators and temperature readings.

設定

1. Transmitter (Pool Thermometer) Setup

1. 電源オン: The transmitter is solar-powered and typically powers on automatically when exposed to light. If it does not turn on, ensure it has sufficient solar charge or connect it to a USB-C charger.
2. 温度単位の変更: After powering on, press the function button on the transmitter to switch between Celsius (°C) and Fahrenheit (°F).
3. 配置: Place the transmitter in the water (pool, hot tub, etc.). Ensure the solar panel is exposed to sunlight for continuous charging.

Image 3: The pool thermometer features a larger solar panel for efficient charging, ensuring extended battery life.

2. Receiver (Indoor Monitor) Setup

1. バッテリーの取り付け： Open the battery compartment on the back of the receiver and insert 2 AAA batteries (included), observing the correct polarity.
2. 電源オン: The receiver will power on automatically once batteries are installed.
3. 配置: Place the receiver in a convenient indoor location, ensuring it is within the wireless transmission range of the transmitter.

3.デバイスのペアリング

The transmitter and receiver are typically pre-paired at the factory. If pairing is required or connection is lost:

1. 送信機と受信機の両方の電源がオンになっていることを確認します。
2. Bring the transmitter and receiver within 1 meter (3 feet) of each other.
3. Press the function button on the transmitter once. The receiver should display the water temperature, indicating successful pairing.

操作手順

温度監視

• The receiver displays the water temperature (OUT) from the transmitter and the ambient indoor temperature (IN).
• The temperature refreshes every 10 seconds for quick readings.
• Press the 'MAX/MIN' button on the receiver to view the highest and lowest recorded temperatures. Press again to cycle through.
• Press the '°F/°C' button on the receiver to switch the display unit between Fahrenheit and Celsius.

Image 4: Key features of the Circrane wireless thermometer, highlighting quick temperature reads, maximum/minimum temperature records, and Celsius/Fahrenheit switching.

メンテナンス

充電

• The transmitter is primarily solar-powered. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
• For faster charging or during periods of low sunlight, use the provided USB-C cable to charge the transmitter.
• The receiver is powered by 2 AAA batteries. Replace them when the low battery indicator appears on the display.

防水加工

The transmitter is IPX8 waterproof, meaning it can withstand continuous immersion in water. Ensure the USB-C port cover is securely closed to maintain its waterproof integrity.

クリーニング

Wipe both the transmitter and receiver with a soft, damp 布で拭いてください。研磨剤や溶剤は使用しないでください。

トラブルシューティング

• No Temperature Reading on Receiver:
    - Ensure both units are powered on.
    - Check battery levels in both units.
    - Bring units closer together to ensure they are within the 300ft wireless transmission range.
    - Re-pair the devices if necessary (refer to Device Pairing section).
• 不正確な温度:
    - Ensure the transmitter is fully submerged in the water.
    - Allow sufficient time for the thermometer to stabilize in the water (typically a few minutes).
• 送信機が充電されない:
    - Ensure the solar panel is clean and exposed to direct sunlight.
    - Try charging via the USB-C cable.

仕様

Image 5: Detailed dimensions of the transmitter and receiver units.

Image 6: Illustration of the wireless transmission range, indicating up to 300 feet in an open field.

保証とサポート

For warranty information and customer support, please refer to the documentation included with your purchase or contact Circrane customer service directly. Keep your purchase receipt as proof of purchase.