1.製品オーバーview
The ARTILAURA GPS Speedometer and Tachometer is a versatile 2-in-1 gauge designed for a wide range of vehicles including motorcycles, boats, trucks, buses, and cars. It provides accurate speed readings via GPS signal and engine RPM, along with essential indication lights. Its robust, waterproof design ensures reliable performance in various environments.
図1.1: 前面 view of the ARTILAURA GPS Speedometer and Tachometer.
2. 主な特徴
- 二重機能: Combines GPS speedometer (0-120MPH) and tachometer (0-8000 RPM) in one unit.
- 表示灯: Features integrated lights for LEFT turn, HIGH BEAM, and RIGHT turn.
- 走行距離追跡: Includes a mileage range of 0-99999.9 miles.
- 耐久性のある構造: Made with Stainless Steel 316L Bezel, Rubber, and Anti-fog Glass.
- IP67防水等級: Fully sealed against dust, rain, and splashes, suitable for marine and all-weather use.
- 幅広い適用性: Compatible with motorcycles, boats, trucks, buses, cars, and off-road vehicles.
- High Precision GPS: Signal comes directly from the satellite signal receiver (GPS Antenna), eliminating the need for additional speed sensors. Offers quick location confirmation and short start-up time.
Figure 2.1: Displaying the speedometer (0-120MPH) and tachometer (0-8000RPM) ranges.
Figure 2.2: Key features including 85mm (3-3/8") dimension, indication lights, and 12V/24V working voltage.
Video 2.3: Demonstrating the ARTILAURA GPS Speedometer and Tachometer's features and waterproof capability.
3. パッケージ内容
Upon opening your ARTILAURA GPS Speedometer and Tachometer package, you should find the following items:
- 1x ARTILAURA GPS Speedometer and Tachometer Gauge
- 1xGPSアンテナ
- 1x Multi-plug Socket (Wiring Harness)
- 1x Installation Instruction Manual
図 3.1: 製品パッケージに含まれるすべてのコンポーネント。
4. 仕様
| 仕様 | 価値 |
|---|---|
| モデル番号 | AR-CX8191B |
| スピードメーター範囲 | 0-120 MPH |
| タコメーター範囲 | 0-8000 回転 |
| ゲージ径 | 85mm（3-3/8インチ） |
| ワーキングVoltage | 9～32VDC |
| 防水等級 | IP67 |
| 材料 | Stainless Steel 316L Bezel, Rubber, Anti-fog Glass |
| 製品寸法（長さ x 幅 x 高さ） | 3.81 x 3.81 x 2.2インチ |
| アイテム重量 | 6.4オンス |
5.インストールガイド
Follow these steps for proper installation of your ARTILAURA GPS Speedometer and Tachometer:
- パネルを準備する: Before installation, create a hole with a diameter of 85mm (3-3/8") in your dashboard or panel. Ensure there is a clearance of at least 55mm (2-3/16") behind the panel to accommodate the gauge.
- Insert the Gauge: Carefully insert the gauge into the prepared hole.
- ゲージを固定する: Use the provided mounting ring and screw down to firmly secure the gauge in place.
- 配線を接続: Refer to the wiring diagram in Section 6 for correct electrical connections.
- GPSアンテナの取り付け: GPSアンテナを障害物のない場所に設置してください。 view of the sky for optimal signal reception. Avoid placing it under metal covers or in enclosed spaces.
Figure 5.1: Visual guide for gauge installation and panel preparation.
図5.2：例ample of the gauge installed in a car dashboard.
図5.3：例ample of the gauge installed in a boat dashboard.
6.配線図
The multi-plug socket includes 10 wires. Ensure each wire is connected to its corresponding function as detailed below:
| 配線色 | 関数 |
|---|---|
| 黒 | 地面 （-） |
| 赤 | 9-32VDC (Power +) |
| 青 | RPM信号 |
| 黄色 | バックライト |
| 白 | ハイビーム |
| 茶色 | Buzzer Alarm (+) |
| 緑 | Buzzer Alarm (-) |
| 黄色 | 左折用信号 |
| グレー | 右折信号 |
| 白 | External Button (Ex. Button) |
図6.1：背面 view of the gauge showing dimensions and wiring harness connection points.
Figure 6.2: Close-up of the wiring connections and their corresponding functions.
7. GPS Setup and Operating Instructions
The gauge features a setting mode for adjusting the speed ratio and an overspeed alarm. The default stroke is a single accumulative mileage that will not be cleared when power is off. Long press the button to clear it.
- 設定モードに入る: Press and hold the rubber button on the back of the meter for 3 seconds to enter the setting mode. Release the button after 3 seconds to exit the setting mode.
- 値の調整: When in setting mode, press and hold the button to increase the value. Release the button and press it again to decrease the value. The longer the button is held down, the faster the value changes. The minimum step value is 0.1, and the adjustable range is 1.0-360.
- Saving Speed Ratio: After adjusting the speed ratio to meet your requirements, release the button. After 3 seconds, the tachometer will automatically save the result you set. If the settings do not meet your requirements, please reset them.
- Overspeed Alarm Adjustment: After power on, short press the button on the back of the instrument twice to enter the overspeed alarm adjustment mode. Then, press and hold the button on the back to display the overspeed alarm adjustment. Press and hold repeatedly to continue adjusting the value. It is automatically saved after 5 seconds. If the settings do not meet your requirements, please reset them.
- GPS信号の取得: Turn on the instrument. The gauge will search for a GPS signal, and the LCD will display "gps--". If there is still no GPS signal after 3 minutes, the LCD will display "Err".
Figure 7.1: Instructions for GPS setup, including speed ratio and overspeed alarm settings.
8。 トラブルシューティング
このセクションでは、発生する可能性のある一般的な問題に対する解決策を示します。
- No GPS Signal (Displaying "gps--" or "Err"):
- GPSアンテナは、障害物のない開けた場所に設置してください。 view of the sky, free from obstructions like metal roofs or dense foliage.
- Check the connection of the GPS antenna to the gauge. Ensure it is securely plugged in.
- Allow sufficient time (up to 3 minutes) for the gauge to acquire a signal after power-on.
- 不正確な速読:
- Verify that the GPS antenna has a strong signal.
- Ensure the speed ratio setting (if applicable for specific applications) is correctly configured as per Section 7.
- Tachometer Not Working or Inaccurate:
- Check the RPM signal wire connection (Blue wire) to your engine's RPM output.
- Ensure the engine type (Diesel/Gas) and cylinder/gear number settings are correctly configured for the tachometer to read accurately. Refer to the tables in Figure 5.1 for guidance on speed ratio settings for different engine types.
- Gauge Not Powering On:
- Check the power (Red wire) and ground (Black wire) connections. Ensure they are securely connected to a stable 9-32VDC power source.
- Verify that the fuse in your vehicle's electrical system, if any, is intact.
- Indication Lights Not Functioning:
- Check the connections for the Left Turn (Yellow), Right Turn (Gray), and High Beam (White) wires.
9. メンテナンス
To ensure the longevity and optimal performance of your ARTILAURA GPS Speedometer and Tachometer, follow these simple maintenance guidelines:
- クリーニング： 柔らかくてamp cloth to clean the gauge face and body. Avoid abrasive cleaners or solvents that could damage the anti-fog glass or housing.
- 接続: Periodically check all electrical connections to ensure they remain secure and free from corrosion.
- アンテナの配置: Ensure the GPS antenna remains in a position with an unobstructed view 空の。
- 水への露出: While the gauge is IP67 waterproof, prolonged submersion or high-pressure water jets should be avoided to prevent potential damage to the wiring connections.
10. 保証とサポート
ARTILAURA products are manufactured to high standards and undergo rigorous quality control. For warranty information, technical support, or service inquiries, please contact ARTILAURA customer service through the retailer where you purchased the product or visit the official ARTILAURA store online.
保証請求のための購入証明として、購入レシートを保管してください。
追加のリソースと製品情報については、 ARTILAURA Store on Amazon.