1. はじめに
The TARSHYRY YX851 is a DC 12V 10A Automatic Power Switching Module designed to provide uninterrupted power to a load by seamlessly switching between a main power supply and a backup battery. This module prioritizes the main power supply and automatically transitions to battery power during outages, ensuring continuous operation of your connected devices. Its advanced manufacturing technology guarantees high reliability and stable performance, meeting strict quality standards for dependable use.
図1：上 view of the TARSHYRY YX851 Automatic Power Switching Module.
2. セットアップと配線
Proper wiring is crucial for the safe and effective operation of the YX851 module. Refer to the wiring diagram below for connection details. Ensure all connections are secure before applying power.
Figure 2: Wiring diagram for the YX851 module. Connect the 12V power supply, 12V battery, and load as shown.
接続手順:
- Main Power Supply Connection: Connect your 12V main power supply (e.g., a 12V power adapter) to the designated input terminals on the module. Ensure correct polarity (+ and -).
- バッテリー接続: Connect your 12V backup battery to the battery terminals on the module. Observe correct polarity (+ and -). The module will charge the battery when the main power is present.
- 負荷接続: Connect your DC 12V load (the device you want to power) to the output terminals. Ensure correct polarity.
- 巻tage 調整: Before initial use, adjust the charge start and shutdown voltage settings as described in the Operating Instructions section to match your battery type and desired operation.
3. 操作手順
The YX851 module operates automatically to manage power distribution. It features user-friendly voltage adjustments for precise control over battery charging and switching thresholds.
Automatic Switching Function:
- When the main 12V power supply is active, the module prioritizes power delivery to the load from the main supply and simultaneously charges the connected 12V battery.
- In the event of a main power failure, the module automatically switches the load to the backup 12V battery, ensuring continuous power without interruption.
- When the main power supply is restored, the module automatically switches the load back to the main supply and resumes charging the battery.
巻tag規制:
The module includes two potentiometers for voltage adjustment, allowing customization for various power and battery needs. These adjustments control the battery charging and discharge thresholds.
Figure 3: YX851 module showing locations for charge start and charge shutdown voltage 調整。
- 充電開始電圧tage 調整: This potentiometer controls the voltage level at which the module begins charging the battery. Turning clockwise increases the voltage、反時計回りに回すと減少します。
- Charge Shutdown Voltag規制: This potentiometer sets the voltage level at which the module stops charging the battery (or switches to battery power if the main supply drops below this threshold). Turning clockwise increases the voltage、反時計回りに回すと減少します。
Precautions for Voltage 調整: For 12V batteries, adjust a half circle clockwise to add approximately 0.5V, and a half circle counter-clockwise to subtract approximately 0.5V. Do not adjust more than one full circle to avoid damage or incorrect operation.
4. メンテナンス
To ensure the longevity and optimal performance of your YX851 module, follow these simple maintenance guidelines:
- 清潔に保ちます： Regularly clean the module with a soft, dry cloth to remove dust and debris. Avoid using liquids or abrasive cleaners.
- 接続を確認してください: すべての配線接続部がしっかりと締め付けられ、腐食していないことを定期的に点検してください。接続が緩んでいると、断続的な動作や損傷につながる可能性があります。
- 環境条件: Operate the module within its specified temperature and humidity ranges. Avoid exposing it to extreme heat, cold, or moisture.
- 換気： Ensure adequate airflow around the module to prevent overheating, especially during prolonged operation or high current draw.
5。 トラブルシューティング
If you encounter issues with your YX851 module, refer to the following troubleshooting steps:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 負荷に電力が供給されていない |
|
|
| Module not switching to battery power during outage |
|
|
| バッテリーが充電されない |
|
|
これらの手順を実行しても問題が解決しない場合は、カスタマー サポートにお問い合わせください。
6. 仕様
Detailed technical specifications for the TARSHYRY YX851 Automatic Power Switching Module:
| 特徴 | 詳細 |
|---|---|
| アイテムタイプ | Automatic Power Switching Module |
| モデル | YX851 |
| ブランド | タルシリー |
| 制御電流 | 10A |
| 材料 | プラスチック |
| 色 | As shown in image |
| サイズ (長さx幅x高さ) | 約69 x 48 x 18 mm / 2.7 x 1.9 x 0.7インチ |
| 取り付けサイズ | Approx. 61 x 41 mm / 2.4 x 1.6 inches |
| メーカー | タルシリー |
| 原産国 | 中国 |
| 状態 | 新しい |
7. 保証情報
This TARSHYRY YX851 Automatic Power Switching Module comes with a 2年間のメーカー保証この保証は、通常の使用状況における材料および製造上の欠陥を対象としています。保証請求の際は、購入証明書を保管してください。
Please note that spare parts availability and guaranteed software updates are not available for this product.
8. サポート
For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact TARSHYRY customer support through your retailer or the official brand website. When contacting support, please have your product model (YX851) and purchase details ready.