導入
This manual provides instructions for the safe and effective use of your E ECSEM Replacement Magnetic USB Charging Cable, specifically designed for MONODEAL DV68 Bone Conduction Headphones. This cable ensures a stable and efficient charging experience for your device.
箱の中身
- 2 x E ECSEM Magnetic USB Charging Cables (60CM/2ft each)
仕様
| 特徴 | 詳細 |
|---|---|
| 入力ボリュームtage / Current | 5V / 0.5-1A |
| ケーブル長さ | 60CM (2ft) |
| コネクタタイプ | Magnetic (for headphones), USB Type A (for power source) |
| 対応デバイス | MONODEAL DV68 Bone Conduction Headphones |
| 材料 | Eco-friendly TPE and TPU |
| 保護機能 | オーバーボリュームtage, Over-current, Power Protection |
設定
- ケーブルを開梱します。 Carefully remove the charging cable from its packaging.
- コネクタを識別します。 One end of the cable has a magnetic charging probe, and the other end has a standard USB Type A connector.
- 電源の準備: Select a suitable USB power source such as a computer's USB port, a laptop, a power bank, or a standard USB wall adapter (not a fast charging adapter).
画像： The USB Type A connector can be plugged into various standard USB power sources like PCs, laptops, power banks, or wall adapters. Avoid using fast charging adapters.
操作手順
- 電源に接続: Insert the USB Type A end of the charging cable into your chosen USB power source.
- ヘッドフォンに接続します: Align the magnetic charging probe with the charging port on your MONODEAL DV68 Bone Conduction Headphones. The magnets will automatically snap the connector into place, ensuring a secure connection.
- モニター充電: Observe the charging indicator on your headphones (if available) to confirm that charging has begun.
- 充電完了： Once your headphones are fully charged, disconnect the magnetic connector from the headphones and then remove the USB Type A connector from the power source.
画像： The magnetic charging end connects to your headphones, while the USB-A end connects to a power source.
画像： 明確な view of the magnetic charging pins and the standard USB-A connector.
メンテナンス
- クリーニング： Gently wipe the cable and connectors with a dry, soft cloth to remove dust or debris. Avoid using liquids or abrasive cleaners.
- ストレージ： ケーブルは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- 取り扱い： Avoid sharp bends or kinks in the cable to prevent internal damage. The cable is designed with a flexible PVC material for durability.
画像： The cable features multi-layer shielding for stability, flexible PVC for easy handling, and pure copper probes for efficient conduction.
画像： The cable's reinforced design provides double protection and a long bend lifespan, ensuring durability.
トラブルシューティング
- ヘッドホンが充電されない:
- Ensure the magnetic connector is properly aligned and securely attached to the headphone's charging port.
- Verify that the USB Type A connector is fully inserted into a working USB power source.
- 別の USB ポートまたは電源を試してください。
- 重要： Ensure you are using a standard 5V/0.5-1A USB power source. Do not use fast charging adapters, as they can damage the headphones or charger.
- Cable or headphones getting hot during charging:
- Immediately disconnect the charger from both the power source and the headphones.
- This indicates a potential issue with the power source or the headphones.
- 重要な： Do not use fast charging adapters. Using an adapter with higher voltage or current than specified (5V/0.5-1A) can cause overheating and permanent damage to your headphones.
- Contact the manufacturer of your MONODEAL DV68 headphones for further assistance if overheating persists with a standard power source.
- 充電が遅い:
- Ensure the power source provides sufficient current (0.5-1A).
- Avoid charging through unpowered USB hubs.
保証とサポート
For any issues or questions regarding your E ECSEM Replacement Magnetic USB Charging Cable, please refer to your purchase documentation or contact E ECSEM customer support through the retailer where the product was purchased. Please provide your model number (ECSEM-DV68-USBA-60-FF) when seeking support.