isinwheel SK14 Electric Bike for Kids User Manual

1. はじめに

Thank you for choosing the isinwheel SK14 Electric Bike for Kids. This manual provides essential information for the safe assembly, operation, and maintenance of your electric bike. Please read it thoroughly before use and retain it for future reference.

The isinwheel SK14 is designed as a 2-in-1 electric balance bike, featuring a powerful 250W motor, 14-inch inflatable tires, and a swappable battery. It offers three speed settings (3/6/10 mph) and is equipped with both an electronic brake and a disc brake for reliable stopping power. The adjustable seat ensures comfort for growing children, and the advanced shock absorption system provides a smoother ride on various terrains.

2. 安全情報

警告: これらの安全指示に従わなかった場合、重傷または死亡事故につながる可能性があります。

• 乗車中は必ずヘルメットと適切な安全装備（膝パッド、肘パッド）を着用してください。
• Adult supervision is required at all times when a child is operating the electric bike.
• Ensure the rider's age and skill level are appropriate for this product.
• Before each ride, check that all bolts and fasteners are tight, brakes are functioning correctly, and tires are properly inflated.
• Do not ride in traffic, on public roads, or in areas with pedestrians. Use in safe, open environments.
• Avoid riding in wet conditions, on steep inclines, or over large obstacles.
• 可動部分に手足を近づけないでください。
• Do not modify the electric bike. Any modifications can compromise safety and void the warranty.
• The maximum weight recommendation for the rider is 154 pounds.

3. 箱の中身

すべての部品を慎重に開梱し、以下のリストと照合してください。不足または破損している部品がある場合は、直ちにカスタマーサポートにご連絡ください。

• isinwheel SK14 Electric Bike Frame
• 取扱説明書
• ブランドカード
• 充電器
• 六角キー
• レンチ
• フロントアクスル
• 前輪
• リアフェンダー
• シート
• バッテリー

4. セットアップと組み立て

Assembly is required. Please follow these steps carefully. Tools needed (Hex Key, Wrench) are included.

1. 前輪を取り付けます。 Attach the front wheel to the fork using the front axle and secure it with the provided nuts and wrench. Ensure the wheel spins freely and is centered.
2. ハンドルバーを取り付けます。 ハンドルステムをフォークチューブに挿入し、締めます。amping bolts with the hex key. Ensure the handlebars are straight and secure.
3. シートの取り付け: Insert the seat post into the frame's seat tube. Adjust the seat height to an appropriate level for the rider, ensuring their feet can comfortably touch the ground. Secure the seat post with the quick-release lever or bolt.
4. Install the Rear Fender: Attach the rear fender to the designated mounting points on the frame.
5. バッテリーを充電する: Before first use, fully charge the battery. Refer to the 'Battery Charging' section for detailed instructions.
6. タイヤの空気圧を確認してください: Ensure both tires are inflated to the recommended pressure (usually found on the tire sidewall).

Illustration of battery installation and removal.

5. 操作手順

5.1 バッテリーの充電

The SK14 features a removable battery for convenient charging.

1. Remove the battery from the bike by pressing the release latch and sliding it out.
2. 充電器を標準の壁のコンセントに接続します。
3. Connect the charger's output plug to the battery's charging port.
4. 充電器のインジケータ ライトは充電状態を示します (例: 充電中は赤、完全に充電されている場合は緑)。
5. Once fully charged (approximately 5 hours), disconnect the charger from the battery and then from the wall outlet.
6. Reinstall the battery into the bike, ensuring it clicks securely into place.

The removable battery connected to its charger.

5.2 電源のオン/オフと速度制御

1. 電源オン: Press the power button on the LED display unit. The display will illuminate, showing battery level and current speed mode.
2. 速度モード： The bike has three adjustable speed gears: 3 mph, 6 mph, and 10 mph. Use the buttons on the display unit to switch between these modes according to the rider's skill and environment.
3. スロットル操作: To engage the motor, press the finger paddle throttle. The bike will accelerate based on the selected speed mode.
4. 電源を切る： ディスプレイが消えるまで電源ボタンを押し続けます。

The clear LED display shows power and speed information.

5.3 ブレーキシステム

The SK14 is equipped with a dual braking system for enhanced safety: an electronic brake and a disc brake.

• To slow down or stop, gently squeeze the brake lever on the handlebars.
• Practice braking in a safe, open area to familiarize the rider with the bike's stopping distance.

The dual braking system provides reliable stopping power.

5.4 ヘッドライトの操作

The super bright headlight ensures visibility and safety, especially during evening rides.

• The headlight can be turned on or off using a dedicated button on the display unit or handlebars, if available. Refer to the specific controls on your bike.

The super bright headlight for improved visibility.

6. メンテナンス

Regular maintenance ensures the longevity and safe operation of your isinwheel SK14.

• クリーニング： 広告でバイクを拭くamp 毎回走行後に布で拭いてください。高圧のジェット水が電気部品に直接当たることは避けてください。
• タイヤ: Regularly check tire pressure and inflate as needed. Inspect tires for wear, punctures, or damage.
• ブレーキ： Periodically check brake lever tension and brake pad wear. Adjust or replace as necessary.
• バッテリーのケア： Store the battery in a cool, dry place. If not used for extended periods, charge it every 1-2 months to maintain battery health. Do not expose the battery to extreme temperatures.
• 留め具: Regularly check all bolts, nuts, and screws to ensure they are tight.
• 一般検査: Inspect the frame, fork, and other components for any signs of damage or wear.

7。 トラブルシューティング

This section addresses common issues you might encounter with your SK14 electric bike.

If you encounter issues not listed here or require further assistance, please contact isinwheel customer service.

8. 仕様

9. 保証とサポート

isinwheel provides a 365-day quality assurance for the SK14 Electric Bike. This warranty covers manufacturing defects and issues with the battery or other accessories. In case of a problem, contact customer service for prompt assistance and potential reissue of parts, avoiding lengthy repair processes.

For any questions, concerns, or support needs, please utilize our 24/7/365 customer services online. Refer to the brand card included in your package for contact details or visit the official isinwheel webサイト。

10.製品オーバーview