導入
The Pro-Ject Debut EVO 2 is a high-fidelity turntable designed for optimal vinyl playback. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure long-lasting performance and enjoyment.
Key features include a next-generation audiophile design, a high-precision Pick it MM EVO cartridge, a 1.7 kg anti-magnetic die-cast aluminum platter with TPE damping, and premium build quality with vibration control.
図1: 前面 view of the Pro-Ject Debut EVO 2 Turntable in Satin White.
設定
Careful setup is crucial for optimal performance. Please follow these steps:
- 開梱: すべての部品をパッケージから慎重に取り出してください。将来の輸送や修理のために、パッケージは保管しておいてください。
- プラッターの取り付け: Place the heavy aluminum platter onto the spindle. Ensure it sits flush and rotates freely.
- ベルトの取り付け: ドライブ ベルトをモーター プーリーとプラッターの内側の縁の周りにゆっくりと伸ばします。
- カウンターウェイト調整: The tonearm is equipped with a pre-fitted Pick it MM EVO cartridge. Adjust the counterweight to achieve the recommended tracking force for the cartridge (refer to cartridge specifications, typically around 1.8g for MM cartridges). Use a tracking force gauge for precision.
- アンチスケーティング調整: Set the anti-skating weight according to the tracking force. The anti-skating mechanism uses a small weight and thread.
- 繋がり： Connect the turntable's RCA output to a phono preamplifier (not built-in) or an amplifier with a dedicated phono input. Ensure the ground wire is connected to prevent hum.
- 力： Connect the 15V DC 0.8A power supply to the turntable and then to a power outlet.
Figure 2: Detail of the 8.6-inch carbon fiber tonearm, designed for rigidity and lightweight performance.
Figure 3: The adaptive anti-skating mechanism, which adjusts to varying skating forces across the record grooves.
Figure 4: The Pick it MM EVO cartridge, co-designed with Ortofon, providing detailed sound reproduction.
ビデオ1: 導入オーバーview of the Pro-Ject Debut Evo 2 turntable, highlighting its features and design.
操作手順
- 電源オン: Press the power button located on the plinth to start the platter rotation.
- 速度を選択します: Use the electronic speed control switch to select between 33 RPM and 45 RPM, depending on the record you are playing.
- 順位記録: ビニールレコードをプラッターの上に慎重に置きます。
- 下部トーンアーム: Use the tonearm lift lever to raise the tonearm. Position the cartridge over the desired track on the record. Gently lower the tonearm using the lever. The stylus will then make contact with the record and begin playback.
- 再生を終了: At the end of the record, or when you wish to stop playback, use the tonearm lift lever to raise the tonearm. Return the tonearm to its rest and secure it. Press the power button to stop the platter.
メンテナンス
定期的なメンテナンスにより、ターンテーブルの寿命とパフォーマンスが保証されます。
- ダストカバー: Always use the provided dust cover when the turntable is not in use to protect it from dust and debris.
- クリーニング： Use a soft, anti-static brush to gently clean the stylus before each play. For the platter and plinth, use a soft, dry cloth. Avoid harsh chemicals.
- ベルトの検査: Periodically check the drive belt for wear or stretching. Replace if necessary to maintain accurate speed.
- Cartridge/Stylus: The stylus has a limited lifespan. Replace it when sound quality degrades or after approximately 1000 hours of playback.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| No power/platter not spinning | Power supply not connected, power button off, belt dislodged. | Check power connections, ensure power button is on, re-seat drive belt. |
| ハミング音 | Ground wire not connected, interference from other electronics. | アース線がしっかりと接続されていることを確認してください。ターンテーブルを他の電子機器から離してください。 |
| Distorted sound/skipping | Incorrect tracking force, worn stylus, dirty record/stylus, turntable not level. | Adjust tracking force, clean stylus/record, ensure turntable is on a level surface. Replace stylus if worn. |
| 速度が正しくない | 間違った速度が選択され、ドライブ ベルトが摩耗しています。 | Verify correct speed (33/45 RPM) is selected. Inspect and replace drive belt if necessary. |
仕様
- ブランド： プロジェクト
- モデル名: デビューEVO2
- モデル番号: DEBUTE2SWH
- 色： サテンホワイト
- 最大回転速度: 45 RPM（33 RPMをサポート）
- 含まれるコンポーネント: 15V DC 0.8A power supply, dust cover, 7'' singles adapter
- 特集: ハイレゾオーディオ
- 材料： アルミニウム、カーボンファイバー
- 商品の重量: 8キログラム
- 接続技術： 有線
- 信号対雑音比： 60デシベル
- 電源: コード式電気
- アイテムの寸法L x W x H： 長さ16.4インチ x 幅12.6インチ x 高さ4.5インチ
Figure 5: Rear connections of the turntable, including RCA outputs for left and right channels and a ground terminal.
Figure 6: Illustration of the TPE damped and anti-magnetic heavy aluminum platter, designed to reduce unwanted resonances.
保証とサポート
The Pro-Ject Debut EVO 2 Turntable comes with a 2-year manufacturer's warranty. For warranty claims or technical support, please contact Pro-Ject customer service or your authorized dealer. Spare parts availability is guaranteed for 25 years in the EU.
For further assistance, visit the official Pro-Ject Audio Systems store: プロジェクトオーディオシステムストア