Gebildet 19mm 15A/220VAC LED Blue Latching Push Button Switch User Manual

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your Gebildet 19mm 15A/220VAC LED Blue Latching Push Button Switch. This all-metal switch is designed for various applications requiring a manual reset, boat reset, instrumentation, entry protection, or household appliance control. It features a solid, crisp push feedback and a comfortable blue LED light. Its IP65 waterproof rating allows for use in humid environments, and the metal shell tolerates vibrations and other harsh environmental conditions.

2. 安全情報

• 感電を防ぐため、設置やメンテナンスを行う前に必ず電源を切ってください。
• すべての配線接続が安全かつ適切に絶縁されていることを確認してください。
• ボリュームを確認するtagスイッチの電圧および電流定格がアプリケーションの要件に適合していることを確認します。
• Installation should be performed by a qualified individual if you are unsure about electrical wiring.
• Do not exceed the specified electrical ratings (15A, 220VAC).

3 製品の特徴

• 材料： Stainless steel shell for durability and corrosion resistance.
• 操作タイプ: Latching (Push ON, Push OFF).
• LEDインジケーター: Blue LED, 220VAC.
• 防水等級: IP65, suitable for wet or dusty environments.
• コンパクトなデザイン: Short type with a total height of 2.5 cm, ideal for limited space installations.
• 接触構造： SPST (Single Pole Single Throw), 1NO (Normally Open).
• High Power Rating: 15A/220VAC.

Figure 1: Compact design for limited space installation.

Figure 2: IP65 waterproof rating ensures protection against water and dust.

4. セットアップとインストール

4.1 パッケージ内容

• 1 x Gebildet 19mm Latching Push Button Switch
• 1 x Wiring Diagram (often included with the switch)

4.2 取り付け

1. 取り付け面がきれいで平らであることを確認してください。
2. Drill a mounting hole with a diameter of 19mm (0.74 inches).
3. Insert the switch into the drilled hole.
4. Secure the switch with the provided nut. The recommended nut torque is 5-14 Nm.
5. The switch is suitable for panel thickness between 1-9 mm.

Figure 3: Detailed dimensions and specifications for mounting.

4.3配線手順

The switch features 4 pins for connection. A simplified wiring diagram is provided to assist with installation. Ensure correct polarity for the LED if applicable, though the provided diagram typically shows AC connections.

• 配線タイプ: Solder pin.
• 端末： Typically two for the switch contacts (NO) and two for the LED.

Figure 4: Wiring diagram showing two common connection methods.

Top Diagram: Device ON, Light ON; Device OFF, Light OFF. This configuration illuminates the LED only when the switch is activated and the device is powered.

Bottom Diagram: Light Always ON. This configuration keeps the LED illuminated constantly, regardless of the switch's ON/OFF state, as long as power is supplied to the LED circuit.

5. 操作手順

This is a latching push button switch. Its operation is straightforward:

• スイッチをつける： Press the button once. The button will remain in the depressed position, and the connected device will activate. The blue LED will illuminate (if wired for simultaneous operation).
• 電源を切るために： Press the button again. The button will return to its original position, and the connected device will deactivate. The blue LED will turn off (if wired for simultaneous operation).

Figure 5: Visual representation of the switch in ON and OFF states.

6. メンテナンス

The Gebildet push button switch is designed for durability and requires minimal maintenance.

• クリーニング： 柔らかくてamp cloth to clean the exterior of the switch. Avoid abrasive cleaners or solvents.
• 検査： 配線接続部の締め付け具合や摩耗、腐食の兆候がないか定期的に確認してください。
• 防水機能: The IP65 rating protects against dust and low-pressure water jets. While suitable for humid environments, avoid prolonged submersion or high-pressure water exposure.

7。 トラブルシューティング

• Switch Not Activating Device:
  • Check all wiring connections according to the diagram (Figure 4).
  • Ensure power supply to the switch and device is active.
  • デバイス自体が正しく機能していることを確認します。
• LEDが点灯しない:
  • Confirm the LED wiring is correct as per the diagram (Figure 4).
  • Check if the power supply to the LED circuit is present.
  • Ensure the switch is in the ON position if the LED is wired for simultaneous operation.
• Switch Not Latching/Unlatching:
  • ボタンがしっかりと押されていることを確認してください。
  • Inspect for any physical obstruction or damage to the button mechanism.

8. 仕様

9. 保証情報

Gebildet products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official Gebildet webご購入いただいた販売店にお問い合わせいただくか、ウェブサイトをご覧ください。保証請求の際は、購入証明としてレシートを保管してください。

10. サポート

If you encounter any issues or have questions regarding your Gebildet push button switch that are not covered in this manual, please contact Gebildet customer support through their official website or the retailer from whom you purchased the product. Provide your model number (E1417) and a detailed description of the issue for faster assistance.