SCULPFUN S30 レーザー彫刻機 ユーザーマニュアル

導入

This manual provides essential information for the safe and effective operation of your SCULPFUN S30 Laser Engraver. Please read it thoroughly before setup and use to ensure optimal performance and safety.

Figure 1: SCULPFUN S30 Laser Engraver with various engraved samples including a wallet, business cards, and a wooden insect model.

安全情報

Operating a laser engraver involves potential hazards. Adhere strictly to the following safety guidelines:

• 目の保護: Always wear appropriate laser safety goggles (Laser Class IV) when the laser is active. Never look directly at the laser beam.
• 換気： 彫刻や切断中に発生する蒸気や煙を拡散させるため、換気のよい場所で彫刻機を操作してください。
• 火災の危険性: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation. The S30 includes an emergency power switch for quick shutdown.
• 材料の適合性: Only engrave or cut materials safe for laser processing. Avoid PVC, vinyl, and other materials that produce toxic fumes.
• 作業面の保護: Use the provided A4 size steel mat or a similar fire-resistant surface to protect your workbench from laser damage.
• 子供とペット: 手術エリアから子供やペットを遠ざけてください。
• 電気安全: Ensure the power supply is correctly connected and grounded. Do not operate with wet hands or in damp 条件。

製品の特徴

The SCULPFUN S30 Laser Engraver incorporates advanced features for precision and efficiency:

• Automatic Air Assist: Equipped with an automatically controlled air pump. This feature intelligently manages air-assist via the M8 button in LightBurn software, directing high-pressure airflow through the metal nozzle. This significantly increases cutting speed (over 5 times faster) and improves cutting performance by clearing debris and reducing charring.
• Ultra-fine Laser Modeling Technology: Features a precise 0.005mm industrial linear guide and a laser focus of 0.06x0.06mm. This results in higher energy density, stronger cutting penetration, and enhanced engraving accuracy, eliminating wave lines in engravings.
• 安全で安定した設計: Constructed from high-strength aluminum alloy, capable of supporting up to 50kg. Includes an emergency power switch for immediate shutdown and an A4 size steel mat to protect surfaces.
• Expandable Engraving Area: The original working area is approximately 400x400mm. It can be expanded to 935x400mm with a Y-axis extension kit, or further to 935x905mm with an XY-axis extension kit (sold separately), accommodating larger projects.
• 幅広い互換性: The latest 32-bit motherboard supports automatic Air-Assist control. Features Bluetooth and SD card offline printing. Compatible with LightBurn (with M8 air support), LaserGRBL, Benbox, GrblController, and LiteFire. Supports Windows and MAC systems. File formats include NC, BMP, JPG, PNG, DXF, and other image formats.
• レーザー出力: Class IV laser with 5000mW output power.

Figure 2: Illustration of the S30's high-density, sharp laser beam and 5W powerful laser beam shaping technology.

Figure 3: Close-up of the S30's built-in high-pressure air assist nozzle, demonstrating airflow.

Figure 4: Diagram showing the automatic controlled air assist feature and its integration with LightBurn software (M8 Air Assist Switch).

Figure 5: Comparison illustrating the benefits of automatic air assist over traditional manual air pumps for clean edges and efficient cutting.

Figure 6: Visual representation of the high precision 0.005mm industrial grade linear rail, highlighting the improved engraving accuracy without wavy lines.

セットアップガイド

Follow these steps to set up your SCULPFUN S30 Laser Engraver:

1. 開梱: すべての部品をパッケージから慎重に取り出します。梱包リストを参照して、すべての部品が揃っていることを確認してください。
2. 組み立て： Assemble the frame according to the included assembly instructions. Ensure all screws are tightened securely.
3. レーザーモジュールの取り付け: Mount the laser module onto the gantry. Connect the laser module cable to the main control board.
4. エアポンプ接続: Connect the air pump to the designated port on the laser module and the main control board.
5. 電源とUSB接続: Connect the power adapter to the engraver and a power outlet. Connect the engraver to your computer via the provided USB cable.
6. ソフトウェアのインストール: Install the recommended software (e.g., LightBurn, LaserGRBL) on your computer. Drivers may be required.
7. 初期キャリブレーション: Follow the software's instructions for initial calibration, including setting the working area and focusing the laser.

図7：以上view of the SCULPFUN S30 components, including the laser module, air pump, and frame parts.

操作手順

This section outlines the basic steps for operating your laser engraver:

1. 材料を準備します: Place the material to be engraved or cut on the work surface, ensuring it is flat and secure. Use the steel mat underneath.
2. ソフトウェアのセットアップ： Open your chosen laser control software (e.g., LightBurn). Import or create your design.
3. パラメータ設定： Adjust laser power, speed, and passes based on the material and desired effect. Refer to material test guides for optimal settings.
4. レーザーを集中させる: Manually or automatically adjust the laser focus for optimal performance. The S30 features a fixed-focus laser, simplifying this step.
5. Enable Air Assist: For cutting operations, ensure the automatic air assist is enabled in the software (M8 command in LightBurn). For engraving, it may be turned off for finer details.
6. 運用開始： Initiate the engraving or cutting process from the software. Monitor the process closely.
7. 完了： Once the process is complete, wait for the laser to stop and fumes to clear before removing the material.

メンテナンス

Regular maintenance ensures the longevity and performance of your engraver:

• レンズを掃除します。 Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain optimal laser focus and power. The S30 features a replaceable lens for easy maintenance.
• 作業エリアを清掃する: Remove debris and dust from the honeycomb workbed and surrounding areas after each use.
• レールの潤滑: Apply a small amount of lubricant to the linear guide rails periodically to ensure smooth movement of the laser module.
• 接続を確認してください: すべてのケーブル接続に緩みや損傷がないか定期的に点検してください。

トラブルシューティング

一般的な問題とその解決策:

仕様

• モデル： xxl-S30 5W
• レーザー出力: 5W
• 彫刻エリア: 400mm x 400mm (Expandable to 935mm x 400mm or 935mm x 905mm with extension kits)
• レーザーフォーカス: 0.06mm×0.06mm
• Linear Guide Accuracy: 0.005mm
• マザーボード: Latest 32-bit with Air-Assist automatic control
• 接続性: USB, Bluetooth, SD Card (offline printing)
• サポートされているソフトウェア: LightBurn, LaserGRBL, Benbox, GrblController, LiteFire
• サポートされているオペレーティングシステム: ウィンドウズ、MAC
• サポート File フォーマット: NC、BMP、JPG、PNG、DXF など
• 製品寸法: 18.11 x 18.11 x 6.69インチ
• 商品の重量: 14.17ポンド
• メーカー: スカルファン
• 原産国： 中国
• 発売日: 9年2024月XNUMX日

保証とサポート

For warranty information and technical support, please refer to the official SCULPFUN webご購入いただいた店舗までお問い合わせいただくか、ウェブサイトをご覧ください。保証請求の際は購入証明としてレシートを保管してください。

SCULPFUN Official Store: Visit the SCULPFUN Store on Amazon