SCULPFUNS9レーザー彫刻機ユーザーマニュアル

1. はじめに

The SCULPFUN S9 is a high-performance laser engraving and cutting machine designed for precision work on various materials. Featuring advanced laser beam shaping technology, it offers powerful cutting capabilities comparable to 90W CO2 lasers, along with ultra-fine engraving precision. This manual provides essential information for the safe and effective operation of your SCULPFUN S9 machine.

Figure 1: SCULPFUN S9 Laser Engraving Machine.

2. 安全情報

Operating a laser engraving machine requires strict adherence to safety guidelines to prevent injury. Please read and understand all safety warnings before use.

• 目の保護: The laser filter cover blocks 98% of UV light, allowing observation without protective glasses. However, always exercise caution. Ensure no pets or unauthorized individuals are exposed to the laser point.
• 緊急停止： The machine is equipped with a power switch for immediate shutdown in emergencies. Familiarize yourself with its location.
• 表面保護: Use the provided A4-sized steel pad to protect your work surface from laser damage and reduce fire risks.
• 換気： Operate the machine in a well-ventilated area to disperse fumes and particles generated during engraving and cutting.
• 可燃性物質: Avoid operating near highly flammable materials. Always monitor the machine during operation.

Figure 2: Laser filter cover for eye protection.

Figure 3: A4 metal pad for surface protection.

3. セットアップと組み立て

3.1 パッケージ内容

組み立てを始める前に、すべてのコンポーネントが揃っていることを確認してください。

• 1 x X-axis component
• 2 x X profiles
• 2 x Y profiles
• 1 x Control box component
• 3xサポートレッグ
• 1 x Laser component
• 1 x 12V 5A Power adapter
• 電源ケーブル x 1
• USBケーブル1本
• 1 x Assembly kit with screws for steps 1-5
• ベルト2本
• 1 x M5 T-type hexagonal screwdriver
• 1 x M4 L-type hexagonal screwdriver
• 1 x M3 L-type hexagonal screwdriver
• 1 x 8-10 mm Screw wrench
• ネクタイ 10本

図4：以上view 含まれるコンポーネント。

3.2組み立て手順

The SCULPFUN S9 features an all-metal structure designed for robustness and stability. Assembly is straightforward and typically takes 10 to 20 minutes. Follow the detailed instructions provided in the included assembly guide (not part of this digital manual) for step-by-step installation. Ensure all screws are tightened securely for optimal performance and safety.

Reserved fixing holes are present on the four feet and the body for securing the machine and data cable, enhancing stability during operation.

Figure 5: Close-up of the robust metal frame.

4. 操作手順

4.1 ソフトウェアの互換性

The SCULPFUN S9 is compatible with a wide range of mature engraving software:

• レーザーGRBL
• LightBurn (supports Windows and Apple systems)
• Benbox
• Grblコントローラー
• LiteFire

It supports PWM mode engraving.

Figure 6: Compatible software and operating systems.

4.2 サポートされている File フォーマット

The machine supports various engraving file formats, including:

• 画像
• PNG
• DXF
• SVGA
• Gコード
• NC
• ＢＭＰ
• ティフ
• PDF
• AI

4.3 彫刻と切断機能

The S9 utilizes the latest 5.5W diode laser beam shaping technology, resulting in an ultra-fine compressed laser focus spot of 0.06*0.06 mm and an engraving accuracy of 0.01 mm. This provides superior penetration and cutting precision.

• 切断： Capable of cutting wood up to 15mm thick, 10mm acrylic, and 10mm plywood.
• 彫刻： Suitable for engraving ceramics and stainless steel, among other materials.

図7：例amples of cutting capabilities (15mm wood, 10mm acrylic).

Figure 8: Demonstration of 0.06mm ultra-fine laser focus for high-precision engraving.

図9：例amples of materials suitable for engraving, including wood, cardboard, leather, and ceramics.

図10：例amples of materials suitable for cutting, including wood, acrylic, cardboard, fabric, bamboo, and plastic sheets.

4.4 フォーカス調整

The laser module features a fixed focus design with an easy sliding mechanism for height adjustment. Refer to the assembly guide for precise focusing instructions to achieve optimal engraving and cutting results.

Figure 11: Fixed focus and sliding design for easy height adjustment.

4.5 Expandable Engraving Area

The SCULPFUN S9's structure uses standard 2020 V-slot anodized aluminum, allowing for easy expansion of the engraving area. You can purchase the SCULPFUN extension kit to enlarge the working area up to 400x950 mm (37.4"x16.14"), which is beneficial for larger projects.

Figure 12: Illustration of the expandable working area from 420x410mm to 950x410mm.

5. メンテナンス

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S9 laser engraver.

• レンズクリーニング: レーザーの出力と精度を維持するために、柔らかく糸くずの出ない布とレンズ洗浄液を使用して、レーザー レンズを定期的に清掃してください。
• レール潤滑: Apply a small amount of lubricant to the guide rails to ensure smooth movement of the laser module.
• 破片の除去: Regularly remove dust and debris from the machine, especially around the laser module and ventilation areas, to prevent overheating and obstruction.
• ベルト張力: Check the tension of the drive belts periodically. Adjust if they are too loose or too tight to ensure accurate movement.

6。 トラブルシューティング

This section addresses common issues you might encounter with your SCULPFUN S9.

If you encounter issues not listed here, please refer to the official SCULPFUN support resources or contact customer service.

7. 仕様

8. 保証とサポート

The SCULPFUN S9 machine comes with a one-year warranty. For any inquiries or support needs, please contact SCULPFUN customer service. They aim to provide attentive service and quick responses within 12 hours.

For further assistance, you may visit the official SCULPFUN store on Amazon: SCULPFUN Store.