1. はじめに
This manual provides detailed instructions for the installation, operation, and maintenance of your YUHANUS Door Access Control System. This system is designed to provide secure and convenient access management for various environments, utilizing a 600lb electric magnetic lock, a waterproof keypad, ID card functionality, and smartphone control via the Tuya app.
適切な機能と安全性を確保するために、設置および使用の前にこのマニュアルをよくお読みください。
2. 安全情報
- 電気安全: Installation involves electrical wiring. Ensure power is disconnected before performing any wiring. If you are not comfortable with electrical work, consult a qualified electrician.
- 巻tage: The system operates on AC 110V-240V input and provides DC 12V output. Verify correct voltage接続。
- 防水等級: The keypad is waterproof (IP68 rated), but ensure all connections are properly sealed and protected from moisture, especially for outdoor installations.
- Magnetic Lock Strength: The 600lb magnetic lock provides strong security. Ensure proper alignment and mounting for optimal performance.
- 緊急アクセス: Always have an alternative emergency exit plan in case of power failure or system malfunction.
- 子供とペット: Keep small components and tools out of reach of children and pets.
3. パッケージ内容と製品view
The YUHANUS Door Access Control System includes the following main components:
- アクセス制御キーパッド
- 600lb Electric Magnetic Lock
- 電源ユニット
- 終了ボタン
- ID Cards/Key Fobs (quantity may vary)
- Mounting Hardware and Cables (not all cables may be included, refer to wiring diagrams)
3.1. Access Control Keypad
The waterproof keypad allows access via PIN code or ID card. It features a numeric keypad, star (*), hash (#), and bell buttons.
3.2. 600lb Electric Magnetic Lock
This magnetic lock provides 600 pounds of holding force for secure door closure. It consists of a magnet unit and an armature plate.
3.3. 電源ユニット
The power supply converts AC input to DC 12V for the access control system components. It includes terminals for various connections and a delay time adjustment button.
3.4. 終了ボタン
A compact metal button for convenient exit from the secured area.
4. セットアップとインストール
Proper installation is crucial for the system's security and functionality. Follow these steps carefully.
4.1. General System Layout
This diagram illustrates the typical placement of components: keypad and Tuya app for outside access, magnetic lock on the door frame, power supply, and exit button for inside access.
4.2. Power Supply Wiring Details
The power supply unit connects to AC 110V-240V (L, N, Ground) and provides DC 12V output. The delay time for the lock can be adjusted using the button indicated.
4.3. Wiring Diagram (Basic Setup)
This diagram shows the connections for the access control keypad, exit button, power supply, and magnetic lock.
Connect the Access Control Keypad (NC, NO, +12V, GND, COM, OPEN, D1, D0, BELL) to the Power Supply (CTRL+, CTRL-, PUSH, GND, +12V, NC, GND, NO) and the Magnetic Lock (+, -). The Exit Button connects to COM and OPEN on the keypad.
4.4. Wiring Diagram (with Remote Control)
If your kit includes a remote control module, use this diagram for connections.
This diagram includes connections for a remote control module, typically connecting to the power supply or directly to the magnetic lock control lines.
4.5. Magnetic Lock Installation
Install the magnetic lock on the door frame and the armature plate on the door. Ensure they are perfectly aligned when the door is closed for maximum holding force. Brackets (L-bracket, Z-bracket) may be required depending on your door type and opening direction.
Example of magnetic lock and armature plate installation on a door frame and door.
5. 操作手順
Once installed, configure and operate your access control system.
5.1. 初期設定とマスターコード
- プログラミングモードに入る： 通常、 * followed by the default master code (e.g., 123456). Refer to your keypad's specific instructions for the default code.
- マスターコードの変更: It is highly recommended to change the default master code immediately for security.
5.2. Adding User Codes (PINs)
- プログラミングモードに入ります。
- Select the option to add a user code (e.g., press 1).
- Enter a unique user ID (e.g., 001).
- Enter the desired PIN code (4-6 digits) and confirm.
- Exit Programming Mode (e.g., press #).
5.3. Adding User Cards (ID Cards/Fobs)
- プログラミングモードに入ります。
- Select the option to add a user card (e.g., press 2).
- Present the ID card/fob to the keypad reader. The keypad will register it.
- プログラミングモードを終了します。
5.4. Tuyaアプリの統合
- アプリをダウンロードする： スマートフォンのアプリ ストアから Tuya Smart または Smart Life アプリをダウンロードします。
- 登録/ログイン: アカウントを作成するか、ログインしてください。
- デバイスを追加: Follow the in-app instructions to add your access control system. This typically involves putting the keypad into pairing mode (refer to keypad manual for specific steps, often holding a button or entering a code).
- リモートコントロール: Once paired, you can remotely unlock the door, manage users, and set temporary passwords via the app.
5.5. ドアのロック解除
- Via PIN Code: Enter your valid PIN code followed by #.
- Via ID Card: Present your registered ID card/fob to the keypad reader.
- Tuyaアプリ経由: Use the unlock function within the Tuya app.
- Via Exit Button: Press the exit button from inside the secured area.
- リモートコントロール経由: If installed, press the unlock button on the remote control.
6. メンテナンス
- 定期清掃: Wipe the keypad and magnetic lock surfaces with a soft, damp 布。 研磨剤入りクリーナーは避けてください。
- 接続を確認してください: Periodically inspect all wiring connections for tightness and signs of corrosion, especially in outdoor environments.
- 磁気ロックの位置合わせ: Ensure the magnetic lock and armature plate remain properly aligned. Misalignment can reduce holding force.
- ソフトウェアアップデート: 最適なパフォーマンスとセキュリティ機能を得るには、Tuya アプリを最新バージョンに更新してください。
- バックアップ電源: Consider a UPS (Uninterruptible Power Supply) for the system to maintain functionality during power outages。
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ドアが開きません。 | Incorrect PIN/card, power failure, wiring issue, magnetic lock misalignment. | Verify PIN/card. Check power supply. Inspect all wiring connections. Ensure magnetic lock and armature plate are aligned. |
| キーパッドが反応しません。 | No power, damaged keypad, water ingress. | Check power supply to the keypad. Inspect for physical damage. Ensure proper sealing if exposed to weather. |
| Tuya App cannot connect to the system. | Wi-Fi issue, incorrect pairing, app outdated. | Ensure your Wi-Fi network is stable (2.4GHz only). Re-attempt pairing process. Update Tuya app. Check if the keypad supports only legacy Wi-Fi B channel 20 MHz. |
| Magnetic lock is weak or not holding. | Misalignment, insufficient power, damaged lock. | Adjust alignment of magnetic lock and armature plate. Verify 12V power supply. Inspect lock for damage. |
| System loses connection after network changes or outage. | Firmware issue, Wi-Fi compatibility. | Reboot the system. Ensure your Wi-Fi router is configured for 2.4GHz and potentially 20 MHz channel width for older devices. Contact support for potential firmware updates. |
8. 仕様
| ブランド | ユハヌス |
| モデル名 | YH-K10-P10-280 |
| ロックタイプ | Electric Magnetic Lock (600lbs holding force) |
| アクセス方法 | PIN Code, ID Card, Tuya App, Remote Control (optional), Exit Button |
| キーパッドの機能 | Waterproof (IP68), Backlit Keypad |
| 材料 | Stainless Steel (components may vary) |
| 電源 | Corded Electric (AC 110V-240V input, DC 12V output) |
| 特集 | Weather Resistant, Smart Home Compatible (Tuya App) |
| 製品寸法 | 11.81 x 9.45 x 3.15 inches (overall package dimensions) |
| アイテム重量 | 6.5 ポンド |
9. 保証とサポート
For warranty information and technical support, please refer to the documentation provided with your purchase or contact YUHANUS customer service directly. Keep your purchase receipt for warranty claims.
For further assistance, visit the official YUHANUS webサイトにアクセスするか、サポート チームにお問い合わせください。