ZIPRO 可変式ダンベル 取扱説明書

導入

Thank you for choosing ZIPRO Adjustable Dumbbells. This manual provides essential information for the safe assembly, operation, and maintenance of your new fitness equipment. Please read this manual thoroughly before first use and keep it for future reference. These dumbbells are designed to facilitate effective strength training exercises, targeting various muscle groups for a comprehensive workout.

重要な安全情報

• 警告： 運動プログラムを開始する前に医師に相談してください。
• Always inspect the dumbbells for any damage or loose parts before each use. Do not use if damaged.
• Ensure all weight plates are securely fastened with the threaded clamps before lifting.
• Use the dumbbells on a flat, stable surface.
• 使用中は子供やペットを装置に近づけないでください。
• Do not drop the dumbbells, as this may cause damage to the equipment or injury.
• Store dumbbells in a dry, safe place away from direct sunlight and extreme temperatures.

パッケージ内容

パッケージを開封したら、すべてのコンポーネントが揃っていて損傷がないことを確認してください。

• 2 x Dumbbell Bars (35 cm length, steel, ribbed handles)
• 4 x Threaded Clamps (star-shaped collars)
• Weight Plates (various sizes, cast iron, 25 mm diameter):
  • Specific quantities and weights may vary based on total weight purchased (e.g., 2.5 kg, 1.25 kg, 0.5 kg plates to reach 20 kg per dumbbell).
• 1 x Storage Case (for convenient transport and storage)

Image: All components of the ZIPRO Adjustable Dumbbell set, including bars, clamps, and weight plates.

セットアップと組み立て

1. コンポーネントを解凍します: Carefully remove all items from the storage case.
2. Select Weight Plates: Determine the desired weight for your exercise. The dumbbells allow for 16 different weight settings by combining various plates.
3. Load Plates onto Bar: Slide the selected weight plates onto the smooth ends of the dumbbell bar. Ensure they are centered and balanced.
4. Cl で保護するamps: Once the desired plates are loaded, screw the threaded clamps onto the ends of the bar until they are hand-tight and the plates are firmly secured. Do not overtighten.
5. 安定性の検証: Gently shake the assembled dumbbell to ensure no plates are loose before beginning your workout.

Image: Two fully assembled ZIPRO Adjustable Dumbbells, ready for use.

Image: Detail of dumbbell bar, weight plates, and threaded clamp.

操作手順

ウェイトの調整

To adjust the weight, unscrew the threaded clamps from both ends of the dumbbell bar. Carefully slide off or add the desired weight plates. Once the new weight configuration is set, re-secure the clamps tightly. Always ensure both sides of the dumbbell have equal weight distribution for balanced lifting.

適切な使用

• Always maintain proper form during exercises to prevent injury.
• Start with a lighter weight to master the exercise technique before increasin負荷をかけます。
• Perform movements in a controlled manner, avoiding sudden jerks or drops.
• Breathe properly throughout your workout.

お手入れとメンテナンス

• クリーニング： Wipe down the dumbbell bars and plates with a damp 使用後は毎回布で汗や汚れを拭き取ってください。研磨剤入りの洗剤は使用しないでください。
• ストレージ： Store the dumbbells in their provided case or a dry, cool place when not in use. Avoid prolonged exposure to moisture or direct sunlight.
• 検査： Periodically check the threaded clamps and bars for any signs of wear, rust, or damage. Replace any worn parts immediately.

Image: The durable storage case for the ZIPRO Adjustable Dumbbells.

トラブルシューティング

製品仕様

保証とサポート

For warranty information or technical support regarding your ZIPRO Adjustable Dumbbells, please refer to the warranty card included with your purchase or visit the official ZIPRO webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。

Manufacturer: Morele.net Sp. z o.o