POLYMAKER Fiberon PA6-GF25

Polymaker Fiberon PA6-GF25 Glass Fiber Nylon Filament Instruction Manual

Model: Fiberon PA6-GF25 | Diameter: 1.75mm | Weight: 0.5kg | Color: Grey

1. はじめに

This instruction manual provides essential information for the proper use and maintenance of Polymaker Fiberon PA6-GF25 Glass Fiber Nylon Filament. Fiberon PA6-GF25 is a high-performance composite material designed for 3D printing, offering enhanced thermal and mechanical properties. Adhering to these guidelines will help ensure optimal print quality and material performance.

2.製品オーバーview

Polymaker Fiberon PA6-GF25 is a glass fiber-reinforced Nylon 6 filament, engineered for applications requiring high stiffness, strength, and heat resistance. It is suitable for a wide range of functional parts.

  • 素材構成: Glass fiber-reinforced Nylon 6.
  • 主なプロパティ： Excellent thermal and mechanical properties, high stiffness, strength, and heat resistance (Heat Deflection Temperature up to 191 °C).
  • 用途: Ideal for parts requiring torsional, tensile, and impact strength, such as bicycle pedals, brackets, jigs, drone frames, prosthetics, and handles.
  • 精度： Manufactured with a precision tolerance of ±0.02mm for consistent diameter.
Polymaker Fiberon PA6-GF25 Glass Fiber Nylon Filament spool and a 3D printed carabiner

Image: A spool of Polymaker Fiberon PA6-GF25 filament in grey, alongside a 3D printed carabiner made from the same material. The spool label shows product details and a QR code for more information.

詳しい製品情報をスキャンする
Key features of PA6-GF25 filament: excellent heat resistance, warp-free, excellent mechanical properties

Image: Infographic highlighting the key features of PA6-GF25: excellent heat resistance, warp-free printing, and excellent mechanical properties.

Table showing mechanical properties of Glass Fiber Reinforced PA6 Nylon

Image: A table presenting the mechanical properties of Glass Fiber Reinforced PA6 (Nylon), including Young's modulus (4431 ± 184 Mpa), Tensile strength (84.5 ± 2.1 Mpa), Charpy impact strength (16.5 ± 0.5 kJ/m²), and Heat deflection temperature (191 °C).

3D printed part undergoing laser testing, demonstrating material properties

Image: A 3D printed component made from Fiberon PA6-GF25 undergoing a laser test, illustrating the material's performance under specific conditions.

Close-up of a 3D printed carabiner made from Fiberon PA6-GF25 filament

画像: クローズアップ view of a functional carabiner 3D printed using Fiberon PA6-GF25 filament, showcasing the material's ability to produce strong and detailed parts.

Filament diameter precision tolerance of ±0.02mm measured with a dual axis laser gauge

Image: An illustration demonstrating the filament's precision tolerance of ±0.02mm, measured by a dual-axis laser gauge, ensuring consistent extrusion and print quality.

3. セットアップと準備

3.1 フィラメントの乾燥

Fiberon PA6-GF25 is hygroscopic and can absorb moisture from the air, which may lead to printing issues such as bubbling, stringing, and reduced mechanical properties. It is highly recommended to dry the filament before use, especially if it has been exposed to ambient humidity for an extended period. A typical drying recommendation is 6 hours at 50°C.

3.2 プリンタの互換性

This filament is compatible with most mainstream and entry-level 3D printers. However, due to its abrasive nature (glass fiber reinforcement), a hardened steel nozzle or equivalent wear-resistant nozzle is strongly recommended. Standard brass nozzles will wear down quickly, leading to inconsistent extrusion and print quality degradation.

3.3 Build Plate Adhesion

Ensure your build plate is clean and properly prepared. Adhesion can be improved with a suitable adhesive (e.g., glue stick, PEI sheet, or specialized nylon adhesives) and maintaining a consistent bed temperature.

4. Operating Instructions (Printing Guidelines)

Optimal printing parameters can vary depending on your specific 3D printer model and setup. The following are general guidelines for Polymaker Fiberon PA6-GF25:

推奨される印刷パラメータ
パラメータ推奨値
ノズル温度260-280°C (Refer to printer's maximum temperature)
ベッド温度70〜90℃
印刷速度Up to 200mm/s for walls/infill (adjust for overhangs)
冷却ファン5-40% (adjust based on part geometry)
ノズル径0.4mm or larger (hardened steel recommended)
囲いRecommended for best results and warp prevention

4.1 Layer Adhesion and Warping

To achieve strong layer adhesion and minimize warping, ensure your printer's enclosure is maintained at a stable temperature. For slicing software, consider enabling "alternate wall printing direction" or similar settings to mitigate potential pull or warp often associated with fiber-filled filaments.

4.2 Support Material

When using support structures, aim for a low-density support infill. For the support interface, ensure settings allow for easy removal while maintaining part integrity. Adjusting support flow to achieve approximately 0.2mm support line width can facilitate clean breakaway.

5.メンテナンスと保管

5.1 フィラメントの保管

After opening, store the filament in its resealable ziplock bag with the included desiccant to prevent moisture absorption. Keep it in a cool, dry place away from direct sunlight. For long-term storage or if the filament has absorbed moisture, re-dry it as per the recommendations in Section 3.1.

Polymaker Fiberon 500g spool with neat winding and rubber reinforced edges

Image: A 500g spool of Fiberon filament, illustrating neat winding and rubber-reinforced edges for durability and compatibility with AMS printers.

5.2 スプールの取り扱い

The filament is carefully wound to prevent tangling. To maintain this, always pass the filament through the fixed hole on the spool when not in use. The cardboard spool features enhanced hard edges to prevent degradation and protect against deformation.

Polymaker Fiberon filament packaging components: cardboard box, cardboard spool, resealable bag with desiccant

Image: An illustration of the Fiberon filament packaging, including the cardboard box, the cardboard spool, and the resealable bag with desiccant for moisture protection.

6。 トラブルシューティング

Below are common issues encountered during 3D printing with fiber-reinforced nylon filaments and potential solutions:

  • Poor Layer Adhesion:
    • フィラメントが乾燥していることを確認してください。
    • ノズル温度を推奨範囲内で上げます。
    • Verify bed temperature is stable and within range.
    • Use an enclosure to maintain ambient temperature.
  • ワーピング:
    • Use a heated build plate and appropriate adhesive.
    • Ensure an enclosed print environment.
    • Reduce cooling fan speed, especially for the first layers.
    • プリンターの周囲に隙間風がないか確認してください。
  • 詰まり/押し出し不足:
    • Confirm you are using a hardened steel or wear-resistant nozzle.
    • Increase nozzle temperature slightly.
    • Check for filament path obstructions.
    • フィラメントが乾燥していることを確認してください。
  • ストリング:
    • フィラメントが乾燥していることを確認してください。
    • Adjust retraction settings (distance and speed).
    • Slightly reduce nozzle temperature.

For further assistance, refer to Polymaker's official support resources or community forums.

7. 仕様

財産価値
ブランドPOLYMAKER
モデルFiberon PA6-GF25
材質タイプGlass Fiber Reinforced Nylon (PA6-GF)
フィラメント径1.75ミリメートル
アイテム重量0.5 kg (1.1 ポンド)
色Grey (Hex Code: #75787b)
メーカー部品番号FG02001
Young's Modulus (X-Y)4431 ± 184 Mpa
引張強度（XY）84.5 ± 2.1 Mpa
Charpy Impact Strength (X-Y)16.5 ± 0.5 kJ/m²
熱たわみ温度191℃

8. 保証とサポート

Polymaker is committed to providing high-quality products. For information regarding product warranty, technical support, or any inquiries not covered in this manual, please visit the official Polymaker web公式サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。 Polymaker Store on Amazon 追加のリソース。

© 2026 Polymaker. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.