Amewi AMXRock Caballo 22670 RC Crawler Instruction Manual

1.はじめにおよび安全情報

ご購入ありがとうございますasing the Amewi AMXRock Caballo 22670 RC Crawler. This manual provides essential information for the safe operation, setup, and maintenance of your new remote-controlled vehicle. Please read this manual thoroughly before operating the product to ensure proper function and to prevent damage or injury.

1.1一般的な安全ガイドライン

• 車両は常に、人、ペット、障害物のない広い場所で運転してください。
• 公道、電線、水域の近くでは操作しないでください。
• 手、髪の毛、ゆったりとした衣服を可動部分に近づけないでください。
• This product is not a toy. It is intended for users aged 14 years and older.
• Never disassemble or modify the vehicle or remote control.
• Ensure all batteries are charged correctly and safely.
• 使用していないときは、車両とリモコンを乾燥した涼しい場所に保管してください。

2. パッケージ内容

Carefully unpack all items and check against the list below. If any components are missing or damaged, please contact your retailer or Amewi support.

• Amewi AMXRock Caballo 22670 RC Crawler
• 2.4GHzリモートコントロール
• Rechargeable Vehicle Battery
• バッテリー充電器
• 取扱説明書（本書）

Note: Batteries for the remote control are typically not included and must be purchased separately (e.g., AA batteries).

3. セットアップ

3.1 車両バッテリーの充電

Before first use, fully charge the included vehicle battery using the provided charger. Refer to the charger's specific instructions for charging times and indicators. Always supervise charging and disconnect the battery once fully charged.

3.2 リモコン電池の取り付け

Open the battery compartment on the back of the remote control. Insert the required batteries (e.g., 4x AA batteries, not included) ensuring correct polarity. Close the compartment securely.

Image: The 2.4GHz remote control for the Amewi AMXRock Caballo 22670, showing its ergonomic design and control layout.

3.3 車両バッテリーの取り付け

Locate the battery compartment on the vehicle, typically under the body shell. Securely connect the charged vehicle battery to the vehicle's power connector. Ensure the battery is properly seated and secured to prevent movement during operation. Reattach the body shell if removed.

画像: サイド view of the Amewi AMXRock Caballo 22670 RC Crawler, highlighting its robust chassis and large off-road tires.

4. 操作手順

4.1 電源のオン/オフ

1. Turn on the remote control first. The indicator light should illuminate.
2. Turn on the vehicle's power switch. The vehicle's lights or indicator should illuminate.
3. The remote control and vehicle should automatically pair. If not, refer to the troubleshooting section.
4. To power off, turn off the vehicle first, then the remote control.

4.2 運転操作

• スロットルトリガー： Pull the trigger to move forward, push it away to brake or reverse.
• ハンドル： ハンドルを左または右に回して車両を操縦します。

4.3 2速トランスミッション

The AMXRock Caballo features a 2-speed transmission, controllable directly from the transmitter. This allows you to switch between a high-speed gear for open terrain and a low-speed gear for maximum torque and control during technical crawling. Consult your remote control's specific button layout for the gear shift function.

4.4 Individual Differential Locks

The vehicle is equipped with individual differential locks, which can be engaged or disengaged from the transmitter. Locking the differentials provides increased traction and climbing ability, especially on very difficult or uneven terrain. Unlock them for better turning radius and less stress on the drivetrain on smoother surfaces. Refer to your remote control's specific button layout for differential lock controls.

4.5 Functional Winch

A functional winch is installed under the model body. This can be controlled from the transmitter to assist in recovery situations, such as pulling the vehicle out of mud or over obstacles. Ensure the winch cable is properly spooled and free of tangles before use. Consult your remote control's specific button layout for winch operation.

画像: 正面 view of the Amewi AMXRock Caballo 22670, showcasing the front bumper, LED headlights, and the integrated winch.

4.6 LED照明システム

The vehicle features a comprehensive LED lighting system, including front/rear lights, turn signals in rearview mirrors, brake lights, reversing lights, and roof lights. These functions are controllable via the transmitter, enhancing realism and visibility during operation. Refer to your remote control's specific button layout for lighting controls.

Image: Rear three-quarter view of the Amewi AMXRock Caballo 22670, showing the detailed rear lights, spare tire, and roof rack.

5. メンテナンス

5.1 クリーニング

• 毎回使用した後、特に汚れていたり濡れていたりする場合は、車両を清掃してください。
• 柔らかいブラシまたは圧縮空気を使用して、シャーシ、サスペンション、ドライブトレインから汚れやゴミを取り除きます。
• 広告で体を拭くamp 布で拭いてください。強い化学薬品は使用しないでください。

5.2 検査

• すべてのネジと留め具がしっかり締まっているかどうかを定期的に確認してください。
• Inspect tires for wear and ensure they are securely mounted.
• サスペンションコンポーネントに損傷や過度の遊びがないか確認します。
• すべての電気接続が安全であり、腐食がないことを確認してください。

5.3 潤滑

Periodically lubricate moving parts, especially the gantry axles with metal gears and CVD drive shafts, to ensure smooth operation and reduce wear. Use RC-specific lubricants as recommended by Amewi or your retailer.

6。 トラブルシューティング

7. 仕様

8. 保証とサポート

Amewi products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your retailer. If you encounter any issues or require technical assistance, please contact Amewi customer support through their official website or your point of purchase. Please have your model number (22670) and proof of purchase ready when contacting support.