導入
This manual provides comprehensive instructions for the installation, operation, and maintenance of your PUREPLUS 2-Stage Whole House Water Filtration System. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the system. Keep this manual for future reference.
安全情報
- Always turn off the main water supply and relieve pressure before installing or servicing the system.
- 水による損傷を防ぐために、すべての接続が安全で漏れがないことを確認してください。
- Do not install the system in direct sunlight or in areas exposed to freezing temperatures.
- Use only genuine PUREPLUS replacement filters to maintain system performance and warranty.
- 設置手順が不明な場合は、資格のある配管工にご相談ください。
製品終了view
主な特徴
- Dual-Function Composite Filter Cartridge: 最初のstage combines a PP (polypropylene) filter and an iron removal filter, effectively removing suspended particles, sediment, and iron.
- Carbon Block Filter Cartridge: 2番目のtage utilizes a carbon block filter designed to remove chlorine, odors, and organic compounds, improving water taste and quality.
- 水質の改善: Provides cleaner, fresher, and better-tasting water for all household needs by removing impurities, sediment, iron, chlorine, and unpleasant odors.
- Easy-to-Monitor Pressure Gauge: Equipped with a pressure gauge to monitor water flow pressure, indicating when filter cartridge replacement is needed.
- 省スペース設計: Standard 10x4.5 inch size allows for easy installation in various home setups without occupying excessive space.
含まれているコンポーネント
- Filtration System Housing
- Sediment & Iron Reducing Filter Cartridge (PPW10BB-SZ)
- Carbon Block Filter Cartridge (CTO10BB)
- フィルターハウジングレンチ
- Pressure Gauges (pre-installed)
Image: PUREPLUS 2-Stage Whole House Water Filtration System components.
Image: Advanced 2-Stage Filtration diagram, illustrating water flow through the sediment/iron filter and carbon block filter.
Image: Highly Efficient Filtration layers, detailing the removal of various contaminants.
Image: Whole House Protection diagram, showing the system's impact on various household water uses.
仕様
| 特徴 | 詳細 |
|---|---|
| 製品寸法 | 長さ16.3インチ x 幅7.5インチ x 高さ15.7インチ (長さ41.4 cm x 幅19.05 cm x 高さ39.88 cm) |
| 商品型番 | PP-WFM10BB2-SZC |
| 重さ | 21.5ポンド（9.75kg） |
| メーカー | PUREPLUS |
| 特集 | Effective Filtration, Whole House Protection |
| インストールタイプ | Under Sink (or main water line) |
| 電源 | Inline (no electrical power required) |
| サポートされている水のTDSレベルの最大値 | 500PPM |
| インレット/アウトレットサイズ | 1インチ |
インストールガイド
始める前に
- 家の水道の元栓を止めてください。
- Drain water from nearby faucets to relieve pressure and ensure no water flow in the pipes.
- Choose a suitable installation location that is easily accessible for maintenance and protected from freezing temperatures and direct sunlight.
- Ensure you have all necessary tools, including a pipe cutter, drill, Teflon tape, and appropriate fittings for your plumbing.
ステップバイステップのインストール
- Locate and Cut the Pipe: Identify the main water line where you want to install the filter. Cut a section of the pipe to accommodate the filter system, ensuring easy access for future maintenance.
- ブラケットを取り付けます。 Securely install the filter system bracket at the designated location. Ensure it is level and stable to support the weight of the filled filter system.
- Determine Water Flow Direction: The system is designed with a specific inlet and outlet. If the default inlet/outlet direction does not match your plumbing, you can reverse the filter housing by removing it, rotating it 180 degrees, and reinstalling. Ensure correct positioning of the water inlet and outlet, and maintain the proper filter element sequence for each stage インストール中。
- 接続の準備: Wrap the threads of the adapter fittings with 10-15 turns of Teflon tape to create a tight and leak-free connection.
- 水道管を接続する: Connect the water pipes to the system's inlet and outlet ports using appropriate plumbing fittings.
- フィルターカートリッジを取り付けます。 Take out the filter cartridges from the system, remove any packaging, and reinstall them in the correct order to ensure proper filtration. The sediment/iron reducing filter (PPW10BB-SZ) typically goes into the first housing (inlet side), and the carbon block filter (CTO10BB) into the second housing (outlet side).
- システムをフラッシュする: Slowly turn on the main water supply. Once water begins to flow through the system, flush it for at least 10 minutes to remove any carbon fines or air.
- 漏れがないか確認する: すべての接続部に漏れの兆候がないか注意深く点検してください。必要に応じて接続部を締め直してください。
Video: PUREPLUS Whole House Water Filtration System Installation & Maintenance Guide.
Image: Product dimensions and key features like brass ports and O-rings.
Image: Premium quality and longevity features of the filter housing.
Image: Simple installation and quick replacement process for filter cartridges.
操作手順
Once installed and flushed, your PUREPLUS 2-Stage Whole House Water Filtration System operates automatically. Water will flow through the system, undergoing filtration before being distributed throughout your home. The pressure gauges allow you to monitor the water pressure, which can indicate the need for filter replacement when a significant drop is observed.
メンテナンス
フィルターの交換
Filter cartridges should be replaced regularly to maintain optimal performance. The frequency depends on your water quality and usage, but generally, cartridges should be replaced every 3-6 months or when a noticeable drop in water pressure occurs, as indicated by the pressure gauges.
- 給水を停止します: システムへの主給水を停止します。
- 圧力を緩和する: Press the red pressure release button on top of each filter housing to relieve any built-up pressure.
- ハウジングを外す: 付属のフィルター ハウジング レンチを使用して、フィルター ハウジングを外します。
- 古いカートリッジを取り外す: Carefully remove the old filter cartridges and dispose of them properly.
- クリーンハウジング: Clean the inside of the filter housings with warm, soapy water and rinse thoroughly. Inspect the O-rings for any damage and replace if necessary. Lubricate O-rings with food-grade silicone grease if needed.
- 新しいカートリッジをインストールします: Insert the new filter cartridges into their respective housings, ensuring they are seated correctly. The sediment/iron reducing filter (PPW10BB-SZ) goes into the first housing, and the carbon block filter (CTO10BB) into the second.
- Screw on Housings: Hand-tighten the filter housings back onto the system. Then, use the wrench to tighten them an additional 1/4 to 1/2 turn. Do not overtighten.
- 給水と洗浄を復旧する: Slowly turn on the main water supply. Flush the system for 10 minutes to remove air and any carbon fines from the new filters.
- 漏れがないか確認する: 漏れがないか、すべての接続を検査します。
Video: PUREPLUS Whole House Water Filtration System Installation & Maintenance Guide (includes filter replacement steps).
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 水圧が低い | Clogged filter cartridges; Air in the system; Partially closed shut-off valve. | Replace filter cartridges; Flush the system to remove air; Ensure all shut-off valves are fully open. |
| 住宅からの漏水 | Improperly seated O-ring; O-ring is damaged or dry; Housing not tightened sufficiently; Cracked housing. | Re-seat O-ring; Replace O-ring and apply food-grade silicone grease; Tighten housing with wrench (do not overtighten); Inspect housing for cracks, replace if damaged. |
| Water Not Clear / Bad Taste | Filter cartridges need replacement; Incorrect filter installation order; System bypass valve is open. | Replace filter cartridges; Verify cartridges are installed in the correct order (sediment/iron first, carbon second); Ensure bypass valve is closed. |
| Difficulty Removing Housing | Housing overtightened; Pressure not relieved. | Ensure pressure release button is pressed; Use the filter wrench for leverage; Avoid overtightening during installation. |
保証とサポート
PUREPLUS products are designed for quality and reliability. For specific warranty details regarding your 2-Stage Whole House Water Filtration System, please refer to the warranty information provided at the time of purchase or contact PUREPLUS customer support.
For additional support, product information, or to purchase replacement filters, please visit the official PUREPLUS store:
Visit the PUREPLUS Store on Amazon
購入を検討することもできますasin製品の延長保護プラン:
- 3年間の保護プラン
- 4年間の保護プラン
- コンプリートプロテクト（月額プラン）