ARPHA H200 Round Dummy Door Knob Instruction Manual

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your ARPHA H200 Round Dummy Door Knob. This non-locking door knob is designed for interior doors where a latching mechanism is not required, such as closets, pantries, and cupboards. Please read these instructions carefully before installation and retain them for future reference.

安全情報

• 取り付け中は必ず手袋や目の保護具などの適切な安全装備を着用してください。
• 窒息の危険を防ぐため、小さな部品はお子様の手の届かないところに保管してください。
• Ensure the door is stable and properly aligned before installing the knob.
• Do not use abrasive cleaners or harsh chemicals on the door knob finish.

パッケージ内容

インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。

• ラッチ(1個)
• Knob Release Tool (x1)
• Screws for the Latch Plate (x2)
• Screws for the Strike Plate (x2)
• Interior Knob (x1)
• Exterior Knob (x1)
• Plastic Latch Cover (x1)
• ストライクプレート（x1）

Image: All components of the ARPHA H200 Round Dummy Door Knob, including the latch, knobs, screws, and tools.

製品終了view

The ARPHA H200 is a dummy door knob, meaning it does not have a locking mechanism and is primarily used for aesthetic purposes or to provide a pull handle for doors that do not require latching, such as closet or pantry doors. It features a classic round design with an ergonomic grip for comfortable use.

• Dummy Functionality: Ideal for doors that only require opening and closing without a latch or lock. The knob can be turned on both sides.
• 人間工学に基づいたデザイン: The classic non-handed design ensures a comfortable grip, reducing hand fatigue, especially for frequently used doors.
• 耐久性のある素材: Constructed from zinc alloy, ensuring outstanding durability and a long-lasting matte black finish.

Image: The ARPHA H200 Round Dummy Door Knob installed on an interior door, blending seamlessly with a modern living room decor.

インストールガイド

Follow these steps for proper installation of your ARPHA H200 Round Dummy Door Knob. A screwdriver is the only tool required.

ビデオチュートリアル:

Video: Official ARPHA H200 Door Knob Installation Video Tutorial. This video demonstrates the step-by-step process of installing the door knob, including adjusting the latch and assembling the knob components.

ステップバイステップの手順:

1. Prepare the Latch: The latch is suitable for backset scale ranges of 2-3/8 inches (60mm) and 2-3/4 inches (70mm). Adjust the latch to the correct backset for your door by rotating the mechanism as shown in the video.

   Image: Diagram illustrating the adjustable backset of the latch (60mm or 70mm) and compatibility with both left and right-handed doors.

2. ラッチを取り付けます。 Insert the adjusted latch into the door edge hole. Ensure it is correctly oriented. Use a screwdriver to tighten the two screws that secure the latch plate to the door.

   Image: A hand using a screwdriver to secure the latch into the door frame, demonstrating the ease of installation.
3. Disassemble Interior Knob (if necessary): Before installing the interior knob, you may need to disassemble the rear lock ball. Get the interior knob and rotate it. Align the internal protruding part and use the knob release tool to depress the knob retainer and pull the knob out of the spindle.
4. Connect Knobs: Match the exterior knob to the keyhole and pass it through the lock latch. Then, connect the interior knob and exterior knob together. Ensure the alignment points are matched for proper assembly.
5. ノブを固定する: Connect the rear lock and front lock together. Use a screwdriver to tighten the screws that hold the interior and exterior knobs together through the door.
6. 最終組立: Finally, buckle the rear ball lock against the rear lock body. Be sure to buckle and install according to the corresponding position.

手術

The ARPHA H200 dummy door knob is designed for simple push/pull operation. The knob can be turned on both sides, but it does not engage a latch or lock mechanism. It is ideal for doors that only require a pull to open and push to close, such as closet doors or pantry doors.

Image: The ARPHA H200 Round Dummy Door Knob installed on a bedroom door, showcasing its simple and functional design for interior use.

メンテナンス

To maintain the finish and functionality of your ARPHA H200 door knob:

• 定期的に柔らかくて乾いた布で拭いてください。amp 布。
• Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the matte black finish.
• Periodically check that all screws are tight to ensure secure operation.

トラブルシューティング

仕様

保証とサポート

ARPHA stands behind the quality of its products. Your ARPHA H200 Round Dummy Door Knob comes with:

• A 30-day money-back guarantee.
• An 18-month warranty.
• 生涯にわたる技術サポート。

For any questions, concerns, or technical assistance, please contact our dedicated support team via email. Our team is available 24/7 to assist you.

For more information or to contact support, please visit the official ARPHA store or refer to your purchase documentation.

Thank you for choosing ARPHA.