Winees WiFi Water Leak Detector S1 Lite Instruction Manual

1.製品オーバーview

The Winees WiFi Water Leak Detector S1 Lite is designed to provide real-time water leak detection and alerts, helping to prevent potential water damage in your home. This system includes a central hub and compact water sensors that communicate wirelessly.

Image: Winees S1 Lite Water Leak Detector Hub and Sensor.

• リモート監視: Connect the hub to 2.4G WiFi for real-time monitoring via a mobile application.
• 広い伝送範囲: Sensors can communicate with the hub up to 100 meters (328 feet) away, even in basements.
• インスタント通知: Receive alerts via the app, email, and SMS when a water leak is detected.
• 調整可能なアラーム: The hub features a 100dB alarm with high, medium, and low volume settings, and an instant mute function.
• Compact & Waterproof Sensors: Sensors are only 1.8mm thick, IP66 waterproof, and designed for placement in hidden corners.
• IFTTT Compatible: Integrates with IFTTT for enhanced smart home automation.

2. 箱の中身

Your Winees WiFi Water Leak Detector S1 Lite package includes the following components:

• 1 x Wi-Fi Hub
• 1 x Water Leak Sensor
• CR2450電池1個（センサーに装着済み）
• 1 x Battery Cover Tool
• クイックスタートガイド x 1

Image: The Winees S1 Lite package contents, showing the hub, a sensor, and the quick start guide.

3. セットアップ手順

3.1 Download the AiDot App

1. 検索する "AiDot" in your smartphone's app store (iOS or Android).
2. アプリケーションをダウンロードしてインストールします。
3. Create an account and follow the in-app instructions to confirm your email.

3.2 Activate the Sensor Battery

Before use, activate the sensor by removing the plastic insulation tab from the battery compartment.

1. Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
2. Remove the plastic insulation tab covering the CR2450 battery.
3. 電池カバーを元に戻し、しっかりと閉じていることを確認します。

Image: Activating the sensor battery by removing the plastic tab.

3.3 Plug in the Wi-Fi Hub

Plug the Wi-Fi hub into a standard electrical outlet in an area with good 2.4G WiFi signal coverage. The hub will automatically enter pairing mode.

3.4 Add Devices to the App

The water leak sensor is pre-paired with the hub by default. If you need to add additional sensors or re-pair, follow these steps:

1. Open the AiDot app and navigate to "My Home".
2. Tap "Add Device" or the '+' icon.
3. Scan the QR code located on the back of each sensor.
4. Follow the on-screen prompts to assign the sensor to a room (e.g., Kitchen, Laundry Room, Basement) for easy identification.

Image: Direct pre-pairing between the hub and sensor for simplified setup.

4. 操作手順

4.1 センサーの配置

Place the water leak sensors in areas prone to water leaks, ensuring they lie flat on the ground. Common locations include:

• シンク下（キッチン、バスルーム）
• 洗濯機や食器洗い機の近く
• 地下室やユーティリティルーム
• 給湯器や排水ポンプの近く

Image: The 1.8mm thin sensor can be placed discreetly in any corner.

Image: Connect multiple sensors throughout your home for comprehensive coverage.

4.2 アラートの受信

When a water leak is detected, the system will trigger multiple alert modes:

• 可聴アラーム： The hub will sound a 100dB alarm.
• アプリ通知: Receive instant push notifications on your smartphone via the AiDot app.
• Email & SMS: Configured email addresses and phone numbers will receive alerts.

Image: Multiple notification methods ensure you are always informed of a leak.

4.3 アラーム制御

• 音量を調整: The hub has buttons to adjust the alarm volume (high/medium/low).
• ミュートアラーム： Press any button on the hub or use the AiDot app to instantly mute the alarm.
• アラーム持続時間： Configure alarm duration settings (always ringing, 10 minutes, 1 minute, 30 seconds) via the app.

Image: Adjustable volume settings for the hub alarm.

Image: One-key function to turn off the alarm.

4.4 公式製品ビデオ

Video: An official product video from Winees demonstrating the S1 Plus Water Leak Detector's features and benefits.

5. メンテナンス

5.1 電池の交換

The water leak sensor uses a CR2450 Lithium-Ion battery. The battery life is approximately 365 days. When the battery is low, the app will notify you. To replace the battery:

1. Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
2. 古い CR2450 電池を取り外します。
3. 新しい CR2450 電池をプラス (+) 側を上に向けて挿入します。
4. 電池カバーを元に戻し、しっかりと閉じていることを確認します。

6。 トラブルシューティング

If you encounter issues with your Winees WiFi Water Leak Detector S1 Lite, consider the following:

• アラートなし: Ensure the hub is connected to a stable 2.4G WiFi network and the sensors are within the 100m transmission range. Check app notification settings and email/SMS spam folders.
• 誤報: Verify that sensors are placed on a dry, flat surface and not in areas prone to condensation or accidental splashes.
• 接続の問題: Restart the Wi-Fi hub and your home router. Ensure the hub is placed in an area with strong WiFi signal.
• センサーが応答しません: Check the sensor battery level in the app. If low, replace the battery. Re-pair the sensor with the hub if necessary.

For further assistance, refer to the detailed troubleshooting section in the AiDot app or contact Winees customer support.

7. 仕様

8. 保証とサポート

Winees is committed to providing high-quality products and customer satisfaction.

• 30日間の返品ポリシー: Enjoy a 30-day return window with no questions asked.
• 24ヶ月間の無条件交換： Products are eligible for unconditional replacement within 24 months of purchase.
• 生涯保証: Winees provides permanent service and technical support for its products.
• 24-Hour Quick Response: お問い合わせに対して 24 時間以内に迅速に回答いたします。

For support, please visit the official Winees webサイトをご覧いただくか、カスタマー サービス チームに直接お問い合わせください。