JJC EN-EL25 USB Dual Slot Battery Charger

導入

This manual provides essential information for the safe and efficient operation of your JJC EN-EL25 USB Dual Slot Battery Charger. This charger is designed to charge Nikon EN-EL25 batteries, commonly used in Nikon Z50, Z30, and Zfc cameras. Please read these instructions carefully before use and retain them for future reference.

製品の特徴

• USB電源: Charges batteries using various USB power sources such as wall chargers, laptops, power banks, or car chargers.
• Dual Slot Charging: Allows simultaneous charging of two batteries.
• 一体型USBケーブル: Features a built-in USB cable for convenient portability.
• LEDインジケーター: Dual LED indicators display the charging status for each battery.
• 安全保護： Includes overheat and overcharge protection to safeguard your batteries.
• 互換性: Designed for original Nikon EN-EL25 batteries and compatible third-party EN-EL25 batteries.

設定

To begin using your JJC EN-EL25 USB Dual Slot Battery Charger, follow these steps:

1. 充電器を開梱します。 充電器をパッケージから取り出します。
2. Access the USB Cable: The charger features a built-in USB cable. Gently pull out the USB connector from its storage slot on the side of the charger.

3. 電源に接続します。 Plug the USB connector into a compatible USB power source. This can be a USB wall charger, a laptop's USB port, a power bank, or a car charger.

Watch this video for a visual guide on connecting the charger:

操作手順

Follow these steps to charge your camera batteries:

1. バッテリーの挿入： Carefully insert one or two Nikon EN-EL25 batteries into the designated charging slots (CH1 and CH2) on the charger. Ensure the battery contacts align correctly with the charger's pins.

2. 充電ステータスの監視: The dual LED indicators on the charger will display the charging status for each battery. During charging, the indicator lamp will flash. Once a battery is fully charged, its corresponding indicator lamp will remain constant (solid).

3. 電池を取り外す: Once charging is complete (solid indicator light), carefully remove the batteries from the charger.

メンテナンス

充電器の寿命を延ばし、最適なパフォーマンスを確保するには:

• クリーニング： 充電器の清掃には、柔らかく乾いた布をご使用ください。液体クリーナーや溶剤の使用は避けてください。
• ストレージ： Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, retract the built-in USB cable into its storage slot.
• 取り扱い： 充電器を落としたり、強い衝撃を与えたりしないでください。

トラブルシューティング

充電器に問題が発生した場合は、次の一般的な解決策を参照してください。

• バッテリーが充電されていない:
  • USB ケーブルが充電器と電源の両方にしっかりと接続されていることを確認します。
  • Verify that the power source is active and providing sufficient power (e.g., wall outlet is working, power bank is charged).
  • Check if the batteries are inserted correctly with contacts aligned.
  • For new batteries, some may require an initial small charge directly in the camera before they can be recognized by external chargers. Try charging the new battery briefly in your camera first.
  • Confirm that the batteries are compatible with the EN-EL25 standard.
• インジケーターライトが機能しない:
  • 充電器が電源に正しく接続されていることを確認してください。
  • If the charger or batteries feel excessively hot, the overheat protection may have activated. Disconnect and allow them to cool before attempting to charge again.

仕様

保証とサポート

JJC products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official JJC webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。