RAF Electric Heater R.1175 User Manual

1. 重要な安全上の注意事項

Please read all instructions carefully before using this electric heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• 電気安全: Ensure the heater is connected to a 220V, 50Hz grounded outlet. Do not overload electrical circuits. Avoid using extension cords unless absolutely necessary and ensure they are rated for the heater's wattag（2400W）です。
• 配置: Place the heater on a stable, level surface. Maintain a minimum distance of 1 meter (3 feet) from walls, furniture, curtains, and other combustible materials. Do not place the heater in areas where it may be exposed to water or high humidity.
• 換気： Do not cover the heater or block its air inlets/outlets. Proper ventilation is essential to prevent overheating.
• 監督： ヒーター作動中は、ヒーターから目を離さないでください。お子様やペットをヒーターに近づけないでください。
• メンテナンス： Always unplug the heater from the power outlet before cleaning or performing any maintenance.
• ダメージ： Do not operate the heater with a damaged cord or plug, or if the heater has malfunctioned or been dropped. Contact qualified service personnel for repair.
• 使用目的: This heater is designed for indoor use only, specifically for heating rooms. Do not use it for drying clothes or other purposes.

2.製品オーバーview

The RAF Electric Heater R.1175 is a 2400W radiant heater designed to provide efficient warmth for indoor spaces. It features an adjustable temperature control for personalized comfort and is built for floor mounting.

Figure 2.1: RAF Electric Heater R.1175 and its packaging, highlighting key features.

図2.2: 前面 view of the RAF Electric Heater R.1175.

3. 技術仕様

4. セットアップ手順

1. ヒーターを開梱します。 ヒーターを梱包から慎重に取り出してください。梱包材は保管や輸送の際に必要となりますので、保管しておいてください。
2. 損傷の検査: Before first use, inspect the heater for any signs of damage. Do not use if damaged.
3. 場所を選択: Place the heater on a firm, level, heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from all combustible materials (e.g., furniture, curtains, paper). Do not place it directly under a power outlet.
4. 電源接続: Ensure the heater's power cord is fully extended and not tangled. Plug the heater directly into a suitable 220V, 50Hz grounded wall outlet. Avoid using extension cords or power strips if possible. If an extension cord is necessary, ensure it is rated for 2400W or higher.

5. 操作手順

1. 電源オン: Once plugged in, locate the power switch or knob on the heater. Turn it to the "ON" position or desired heat setting.
2. Adjust Temperature/Heat Settings: The RAF R.1175 features adjustable temperature control. Rotate the thermostat knob (if present) or select the desired heat level (e.g., Low, Medium, High) to achieve your preferred room temperature. The heater will cycle on and off to maintain the set temperature.
3. 初回使用: During the first few minutes of operation, a slight odor may be detected. This is normal and will dissipate quickly.
4. 電源を切る： To turn off the heater, switch the power control to the "OFF" position. Unplug the heater from the wall outlet when not in use for extended periods.

6.メンテナンスと保管

• クリーニング： 掃除をする前に必ずヒーターのプラグを抜き、完全に冷ましてください。柔らかくて乾いた布を使用してください。amp 外側の表面を布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。ヒーター内部に水が入らないようにしてください。
• ほこりの除去: Periodically use a vacuum cleaner with a brush attachment to remove dust from the grilles and heating elements.
• ストレージ： When not in use, store the heater in a cool, dry place, preferably in its original packaging. Ensure the power cord is neatly wrapped and not kinked.

7。 トラブルシューティング

If your heater is not operating correctly, please check the following before contacting customer support:

8. 保証と顧客サポート

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. Keep your proof of purchase for warranty claims.

If you experience any issues not covered in the troubleshooting section, or require further assistance, please contact RAF customer support through their official channels or your point of purchase.