導入
This instruction manual provides essential information for the proper installation, operation, and maintenance of your LeMotech IP65 ABS Waterproof Electrical Junction Box. Please read this manual thoroughly before use to ensure safe and efficient application of the product. This enclosure is designed to protect electrical components in various environments, offering resistance to water, dust, and impact.
パッケージ内容
- 1 x LeMotech ABS Electrical Junction Box (200x120x56mm)
- 1 x Rubber Gasket for Lid
- 4 x Metal Screws for Lid Fastening
Image: The LeMotech electrical junction box, showing the main enclosure, lid, four metal screws, and the rubber gasket.
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | LeMotech |
| モデル | 200x120x56mm |
| 材料 | 高品質のABSプラスチック |
| 色 | 黒 |
| 外形寸法（長さ×幅×高さ） | 200mm x 120mm x 56mm（約7.87インチ x 4.72インチ x 2.20インチ） |
| Internal Dimensions (L x W x H, excluding stud height) | 171mm x 75mm x 29mm（約6.73インチ x 2.95インチ x 1.14インチ） |
| IP 定格 | IP65（防水・防塵） |
| 耐衝撃性 | はい |
| 取り付けタイプ | ネジ止め式 |
寸法図
Image: External dimensions (200mm x 120mm x 56mm).
Image: Internal dimensions (190mm x 110mm, with mounting points at 159mm x 79mm).
Image: Height dimensions, showing lid depth (10mm) and base depth (37mm).
安全情報
- Always disconnect power before working on electrical components inside the enclosure.
- すべての接続が安全かつ適切に絶縁されていることを確認してください。
- Do not exceed the electrical ratings of the components installed within the box.
- If drilling holes for cable glands or mounting, ensure proper sealing to maintain the IP65 rating.
- Consult a qualified electrician for complex installations or if you are unsure about any procedure.
インストールガイド
Follow these steps for proper installation of your LeMotech electrical junction box:
- エンクロージャを準備する: If you need to route cables, carefully drill holes for cable glands in the desired locations. Ensure the hole size matches the cable gland for a tight seal. The ABS plastic is designed for easy modification.
- 内部コンポーネントをインストールします。 Mount your electrical components (e.g., terminal blocks, PCBs, relays) inside the box using the integrated mounting points. The box features brass inserts for secure screw fastening.
- Install the Gasket: Place the rubber gasket securely into the groove around the perimeter of the lid. Ensure the gasket is fully seated and forms a continuous seal. If the gasket appears too short, gently stretch it to fit the entire groove.
Image: Gasket installation tips, illustrating how to stretch the gasket if needed and ensure a complete seal for IP65 protection.
Image: Detail of the rubber gasket properly seated in the lid's sealing groove.
画像: 内部 view showing the molded mounting points for securing components.
Image: Close-up of the brass inserts in the enclosure base, designed for the lid screws.
- 蓋をしっかりと固定します。 Place the lid onto the base, aligning the screw holes. Insert the four metal screws and tighten them evenly to compress the gasket and create a watertight seal. Do not overtighten.
- エンクロージャをマウントします。 Secure the entire enclosure to your desired surface using appropriate mounting hardware (not included).
手術
The LeMotech electrical junction box functions as a protective housing for your electrical and electronic components. Once installed and sealed, it provides a secure environment against environmental factors. No specific operational steps are required for the box itself beyond ensuring it remains properly closed and sealed.
画像: 元ample of the junction box in use, housing various electrical components for a DIY project.
メンテナンス
- 定期点検: Periodically check the enclosure for any signs of damage, cracks, or loose screws.
- ガスケットの完全性: Ensure the rubber gasket remains flexible and free from tears or degradation. Replace if necessary to maintain the IP65 rating.
- クリーニング： 箱の外側を広告できれいにするamp cloth. Avoid using harsh chemicals that could damage the ABS plastic.
- ネジの締め付け具合: Occasionally check that the lid screws are snug. Do not overtighten.
トラブルシューティング
- Water or Dust Ingress: If you observe water or dust inside the enclosure, immediately disconnect power. Check the gasket for proper seating and damage. Ensure all cable glands or drilled holes are properly sealed. Retighten lid screws evenly.
- 蓋がきちんと閉まらない: Verify the gasket is correctly installed in its groove and is not pinched or misaligned. Ensure all four screws are tightened evenly.
- ひび割れや損傷: If the enclosure develops cracks or significant damage, its protective capabilities may be compromised. Consider replacing the unit to ensure continued protection of internal components.
Image: The junction box demonstrating its IP65 waterproof capability under simulated rain.
Image: The junction box demonstrating its dustproof capability in a dusty environment.
Image: The junction box demonstrating its impact resistance against a hammer strike.
保証とサポート
For warranty information and customer support, please refer to the official LeMotech webご購入いただいたサイトをご覧いただくか、ご購入店にお問い合わせください。購入証明書としてレシートを保管してください。