導入
This manual provides essential information for the safe and efficient operation of your OMTech 50W Fiber Laser Engraver. Please read thoroughly before use.
安全情報
- Always wear protective eyewear (safety goggles included) when operating the laser engraver.
- Ensure proper ventilation to avoid inhaling fumes during engraving.
- 緊急停止ボタンの位置と機能をよく理解しておいてください。
- Do not operate the machine rapidly or out of sequence; allow a 3-second interval between operations.
- This is a Class 2 laser product (0.874 mW output power).
セットアップガイド
開梱と初期組み立て
Carefully unpack all components from the shipping crate. Ensure all parts listed in the packing list are present.
ビデオの説明: This video demonstrates the step-by-step installation process for the OMTech fiber laser engraver, including attaching the laser arm and connecting components.
ビデオの説明: A detailed guide on setting up your OMTech laser engraver, covering initial assembly and connections.
コンポーネントの識別
画像の説明: ビジュアルオーバーview of the main components of the OMTech 50W Fiber Laser Engraver, including the main unit, laser arm, and control panel.
電源とUSBの接続
Connect the power cable to a standard 110V power supply. Connect the machine to your computer via the provided USB cable.
ビデオの説明: This video provides a comprehensive setup guide for the compact fiber marker, detailing how to connect the power, USB, and other essential components.
Software Installation (EzCad2)
Install the EzCad2 software from the provided USB drive. Ensure drivers are correctly installed via Device Manager.
画像の説明: An image showing the EzCad2 software interface on a laptop, which is used to control the OMTech 50W Fiber Laser Engraver.
操作手順
レーザーの焦点を合わせる
Use the red dot pointer for precise calibration and focusing. Adjust the laser arm height until the two red dots converge into one for optimal focus.
画像の説明: This image illustrates the red dot guidance system, which helps in precisely focusing the laser on the material before engraving.
彫刻のプロセス
Import your design into EzCad2, set engraving parameters (speed, power, frequency), and preview the engraving area using the frame function. Wear safety goggles before initiating engraving.
ビデオの説明: A short video demonstrating the OMTech fiber laser engraver in action, showing the laser marking a surface.
ビデオの説明: This video shows the OMTech fiber laser engraver working with a rotary axis to engrave cylindrical objects.
画像の説明: This image highlights the professional precision achieved by the OMTech engraver, showcasing fine details on an engraved design.
Rotary Axis Operation (Optional)
For engraving curved surfaces, connect a compatible rotary axis (not included) to the 4-pin port.
画像の説明: An image depicting the OMTech fiber laser engraver set up to engrave on curved surfaces using an optional rotary axis.
メンテナンス
Regularly clean the lens and work area to ensure optimal performance. Refer to the user manual for detailed cleaning procedures and recommended maintenance schedules.
The laser source has an average service life of over 100,000 hours, requiring minimal maintenance for the laser unit itself.
トラブルシューティング
よくある問題と解決策
- レーザーが発射されない: Check power connections, emergency stop button, and ensure the "Fiber Laser" button is pressed. Verify the "Scan Head" key is turned to the ON position.
- 彫刻品質が悪い： Re-check focal length using the red dot pointer. Ensure material is clean and flat on the workbed. Adjust engraving parameters (speed, power) in the software.
- Software not recognizing machine: Reinstall USB drivers from the provided USB drive. Check USB cable connection.
仕様
- モデル番号: LYF-50W
- レーザー出力: 50W Solid-State Fiber Laser
- レーザークラス: 2 (0.874 mW output power)
- 作業エリア: 7.9 x 7.9インチ（200 x 200 mm）
- 彫刻速度: 最大10,000mm/s
- 彫刻精度: 0.01ミリメートル
- Per-Pass Depth: 0.1ミリメートル
- Laser Source Life: 100,000時間以上
- ソフトウェアの互換性： EzCad2 (Windows), LightBurn compatible
- 製品寸法: 30.5 x 17.7 x 31.1インチ
- 材料容量： 最大44.1ポンド。
保証とサポート
This product includes a 30-day return policy for refund or replacement. For specific warranty details beyond this period, please contact OMTech Direct.
OMTech offers U.S.-based technical support and 24/7 online customer service. Our teams are available Monday to Friday, 8:30 AM to 4:30 PM PST.
サポートについては、次のサイトにアクセスしてください。 OMTech Store on Amazon or contact support@omtechlaser.com.
追加リソース
For further assistance and community engagement, consider joining official laser user groups on Facebook or checking instructional videos on the OMTech YouTube channel.
A QR code is provided on the machine for the latest version of the user manual and additional resources.
画像の説明: A product image showing the OMTech 50W Fiber Laser Engraver, with a visible QR code that links to the latest user manual and support resources.