VIPEK V5L Heavy Duty Garment Rack with Dimmable LED Light Instruction Manual

1.製品オーバーview

The VIPEK V5L Garment Rack is a heavy-duty, freestanding metal clothing rack designed for organizing clothes, shoes, and accessories. It features adjustable shelves, removable hanging rods, and integrated dimmable LED lights for enhanced visibility. Constructed from high-quality carbon steel, it offers a strong bearing capacity of up to 890 lbs, providing a stable and sturdy storage solution.

• 寸法: 長さ68.9インチ x 幅15.7インチ x 高さ76.4インチ。
• Strong Bearing Capacity: Load capacity up to 890 lbs, designed for durability and resistance to deformation.
• Sturdy & Flexible: Made of high-quality iron, featuring 8 adjustable shelves and 4 removable hanging rods for customizable configurations.
• Upgraded Closet with Dimmable LED Lights: Features dual rows of warm white (3000K) LED beads with a glare-free frosted cover. Stepless dimming allows easy adjustment of brightness via a control box.
• 組み立てが簡単: Designed for straightforward assembly with clear instructions. An installation video is also available for guidance.

2. 安全情報

Please read and understand all safety information before assembling or using this product.

• Do not overload the garment rack beyond its maximum load capacity of 890 lbs.
• 組み立ておよび使用中は鋭利な部分に注意してください。
• ラックにアイテムを置く前に、すべての接続がしっかりと固定されていることを確認してください。
• Use the provided anti-tip devices to secure the rack to a wall, especially in households with children or pets, to prevent accidental tipping.
• 窒息の危険を防ぐため、小さな部品はお子様の手の届かないところに保管してください。

3. パッケージ内容

Verify that all components are present before beginning assembly. Refer to the parts list in the user manual for detailed identification.

• Metal Shelves (A)
• Upper Poles (B)
• Middle Poles (C)
• Lower Poles (D)
• Sidebars (E)
• Clothes Hanger Rods (F)
• Hook Brackets (G)
• Screws (H)
• Plastic Clips (I)
• Anti-Tip Devices (J)
• LED Lights with Switch Wire and Power Adapter
• ゴムハンマー（組み立て用）

4. セットアップと組み立て

Follow these steps carefully to assemble your VIPEK V5L Garment Rack. An installation video is available for visual guidance.

4.1. Prepare Poles and Clips

1. Identify the Lower Poles (D). Attach the Plastic Clips (I) to the grooves on the poles. Ensure the "TOP" arrow on the clips points upwards and that the flanges fit perfectly into the grooves. All clips for a single shelf should be at the same height.
2. Connect Middle Poles (C) to Lower Poles (D) by twisting clockwise. Ensure the hollow end of the middle pole connects to the silver connector of the lower pole.
3. Connect Upper Poles (B) to Middle Poles (C) similarly.

4.2. Assemble Base Sections

1. For each base section, slide four Lower Poles (D) through the sleeves of a Metal Shelf (A). Ensure the VIPEK logo on the shelf is facing the correct direction.
2. Erect the assembly. Press down on the corners of the wire shelf with your palms to firmly secure it onto the plastic clips.
3. Repeat for all base sections.

4.3. Connect Middle and Top Sections

1. Attach Middle Poles (C) to the assembled base sections.
2. Place Metal Shelves (A) onto the Plastic Clips (I) at the desired height for the middle sections. Ensure the shelf is parallel to the floor and slide it down slowly until all four sleeves fit snugly onto the clips.
3. Attach Upper Poles (B) to the middle sections.
4. Place Metal Shelves (A) onto the Plastic Clips (I) at the desired height for the top sections.

4.4. Install Support Rails and Hanger Rods

1. Attach Sidebars (E) to the poles using Plastic Clips (I). Ensure the pointed angle of the metal faces upwards.
2. Attach Hook Brackets (G) to the Clothes Hanger Rods (F) using Screws (H). Partially tighten the screws first.
3. Hang the assembled Clothes Hanger Rods (F) onto the wire shelves and then fully tighten the screws.

4.5. Final Adjustments and Anti-Tip Device

1. Use a rubber mallet to gently tap the wire shelves at their corners to ensure they are firmly connected to the poles.
2. Install the Anti-Tip Devices (J) to secure the garment rack to the wall, following the instructions provided in the package.

インストールビデオチュートリアル

For a detailed visual guide on assembling your VIPEK V5L Garment Rack, please watch the official installation tutorial below.

5. Operating Instructions (Dimmable LED Lights)

The VIPEK V5L Garment Rack features integrated dimmable LED lights for convenient illumination.

1. 電源オン/オフ: Locate the control box for the LED lights. Press the button once to turn the lights on or off.
2. 無段階調光: To adjust the brightness, press and hold the button on the control box. The lights will gradually dim or brighten. Release the button when the desired brightness level is reached. The lights offer a 3000K warm white color temperature.

6. メンテナンス

To ensure the longevity and optimal performance of your garment rack, follow these maintenance tips:

• クリーニング： 金属表面を柔らかくて乾いた布で拭いてください。amp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や刺激の強い化学薬品は使用しないでください。
• 検査： すべてのネジと接続部がしっかりと締まっているか定期的に点検してください。必要に応じて締め直してください。
• 負荷管理: Distribute weight evenly across the shelves and hanging rods to prevent stress on any single point. Do not exceed the maximum load capacity.
• LEDライト: Ensure the LED lights and wiring are free from damage. If any damage occurs, discontinue use and contact customer support.

7。 トラブルシューティング

If you encounter any issues with your VIPEK V5L Garment Rack, refer to the following common troubleshooting steps:

• ラックがぐらぐらする:
  • Ensure all plastic clips are correctly positioned in the grooves and fully engaged.
  • Use the rubber mallet to firmly tap down all shelves onto their respective clips.
  • Check that the adjustable feet are evenly balanced on the floor.
• LED ライトが動作しない:
  • 電源アダプタが機能しているコンセントにしっかりと差し込まれていることを確認します。
  • Check all connections between the LED light strips, switch wire, and power adapter.
  • Ensure the switch wire is firmly and well connected.
  • 問題が解決しない場合は、カスタマーサポートに連絡してください。
• 不足している部品:
  • Carefully check all packaging materials. If parts are still missing or damaged, kindly reach out to VIPEK customer support for assistance.

8. 仕様

9. 保証とサポート

For warranty information, missing parts, or any other product-related inquiries, please contact VIPEK customer support directly. Any unauthorized modification to this item will void its warranty.

Refer to the contact information provided with your purchase or visit the official VIPEK webサポート詳細のサイト。