iGear iG-1072

iGear Desklite Pro LED Table Lamp iG-1072 User Manual

モデル: iG-1072

導入

Thank you for choosing the iGear Desklite Pro LED Table Lamp。 この充電式lamp is designed for study and office use, featuring a time and date display, three light modes (Warm, Neutral, and Cool), and intuitive touch controls. Its foldable design and wooden texture finish offer both functionality and aesthetic appeal.

デバイスを正しく使用し、寿命を最大限に延ばすために、デバイスを操作する前にこのマニュアルをよくお読みください。

パッケージ内容

  • iGear Desklite Pro LED Table Lamp (iG-1072)
  • 電源ケーブル(USB Type-C)

製品終了view

iGear Desklite Pro LED Table Lamp in a study setting

Image: The iGear Desklite Pro LED Table Lamp、ショーasing its sleek design and wooden texture in a typical desk environment.

The Desklite Pro features a foldable arm for adjustable lighting angles, an integrated digital display for time and date, and intuitive touch controls. The base is designed for stability on any flat surface.

セットアップ手順

1. Lの充電amp

Lamp is equipped with a built-in 2000 mAh rechargeable battery. Before first use, fully charge the lamp.

  1. Locate the Type-C charging port on the back of the lampのベース。
  2. Connect the provided USB Type-C power cable to the lamp and plug the other end into a compatible USB power adapter (not included) or a computer's USB port.
  3. 充電インジケーターライトが点灯します。充電が完了すると、モデルによってはインジケーターの色が変わったり消灯したりします。
Close-up of Type-C charging port on iGear Desklite Pro lamp

画像: クローズアップ view of the Type-C charging port located on the side of the lamp's wooden base, with a charging cable connected.

2. 時刻と日付の設定

Lamp features a digital display for time and date. To set these:

  1. Locate the setting buttons above the digital display. These typically include a "Mode" button and "Up/Down" or "Set" buttons.
  2. Press and hold the "Mode" or "Set" button until the time display starts blinking.
  3. Use the "Up/Down" buttons to adjust the hour, then press "Mode" or "Set" to confirm and move to minutes.
  4. 分、年、月、日についてもこのプロセスを繰り返します。
  5. Once all settings are confirmed, the display will stop blinking.
Close-up of iGear Desklite Pro digital display and setting buttons

画像: 詳細な view lのamp's control panel, highlighting the digital display for time and date, and the setting buttons above it, along with the main touch control button.

操作手順

1. 電源のオン/オフと明るさの調整

  • lを回すにはamp ON or OFF, lightly touch the main power button located below the digital display.
  • To adjust brightness, press and hold the power button. The brightness will cycle through its levels. Release the button when the desired brightness is reached.

2. Changing Light Modes (Color Temperature)

Lamp offers three distinct light modes: Warm, Neutral, and Cool. To switch between these modes, briefly tap the main power button repeatedly after turning the lamp on. Each tap will cycle to the next mode.

iGear Desklite Pro showing three different light color temperatures: Cool White, Natural White, and Warm White

Image: Three iGear Desklite Pro lamps displayed side-by-side, each illuminating with a different color temperature: Cool White, Natural White, and Warm White, demonstrating the lampの汎用性。

3.Lの調整amp 角度

Lamp head is foldable and can be adjusted up to 140 degrees to direct light precisely where needed. Gently pivot the lamp head to achieve your desired angle.

iGear Desklite Pro lamp head adjusting to a 140-degree angle

Image: The iGear Desklite Pro lamp shown with its head tilted back, illustrating its 140-degree adjustable angle for directing light.

4. Eye Protection Feature

The LED light source is designed to provide comfortable illumination, reducing eye strain during extended use for reading or working.

Person using iGear Desklite Pro lamp for study, highlighting eye protection

Image: A person studying at a desk with the iGear Desklite Pro lamp providing illumination, emphasizing its eye protection feature.

メンテナンス

  • クリーニング: 乾いた柔らかい布で拭いてください。amp. Avoid abrasive cleaners or solvents that may damage the finish or electronic components.
  • バッテリーのケア: バッテリーの寿命を延ばすには、完全に放電しないようにしてください。amp 頻繁に充電してください。amp when the light dims or the low battery indicator appears. If storing for an extended period, charge the battery to approximately 50% every three months.
  • ストレージ: lを保存するamp 直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。

トラブルシューティング

問題考えられる原因解決
Lamp does not turn on or dims quickly.バッテリー残量が少なくなりました。lを接続するamp to a power source using the provided Type-C cable and allow it to charge fully.
Digital display shows incorrect time/date.Time/date not set correctly or internal clock drift.Refer to the "Setting Time and Date" section in Setup Instructions to reset the time and date. Note that minor clock drift may occur over time.
Lamp タッチコントロールに反応しません。一時的なソフトウェアの不具合または電力不足。lを確保するamp is charged. Try turning the lamp off and on again. If the issue persists, allow the battery to fully discharge and then recharge it.
光の出力が不安定、またはちらつきます。充電中にバッテリー残量が少なくなるか、電源が不安定になります。lを確保するamp is fully charged. If operating while plugged in, try a different USB power adapter or port.

仕様

特徴詳細
モデル番号IG-1072
ブランドアイギア
光源の種類導かれた
ライトモードの数3(暖色、中間色、寒色)
制御方法タッチコントロール
電源電池式(充電式)
バッテリー容量2000mAh(内蔵)
充電ポートUSBタイプC
製品寸法(奥行き×幅×高さ)奥行き8.8cm x 幅6.7cm x 高さ29.5cm
ベース素材木材
シェード素材プラスチック、木材
巻tage5 ボルト (DC)
接続技術USB
屋内/屋外での使用屋内のみ

保証とサポート

保証情報

The iGear Desklite Pro LED Table Lamp 付属 1年間の限定保証. This warranty is non-transferrable and is valid for 1 year from the original date of purchase. It covers manufacturing defects under normal use conditions.

保証請求のための購入証明として購入レシートを保管してください。

カスタマーサポート

For any questions, technical assistance, or warranty claims, please contact iGear Tech Private Limited. While specific contact details are not provided in this document, you can typically find support information on the official iGear webサイトまたは購入場所を通じてご購入いただけます。

メーカー: iGear Tech Private Limited

© 2024 iGear Tech Private Limited. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.