1. はじめに
This manual provides detailed instructions for the installation, operation, and maintenance of the Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light. This unit is designed to meet code requirements for emergency egress lighting in commercial buildings, offering both an illuminated exit sign and emergency lighting with adjustable LED heads.
画像1.1: 以上view of the Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light units.
2. 安全情報
Please read and understand all instructions before installation and operation. Retain this manual for future reference.
- 電気安全: All wiring must be performed by a qualified electrician in accordance with national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
- 製品の完全性: Do not modify or alter the product. Use only manufacturer-specified replacement parts.
- 位置： This unit is UL certified and damp location listed. Ensure the installation environment is suitable.
- バッテリー： The unit contains a nickel-cadmium battery. Dispose of batteries according to local regulations.
3. パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light Unit
- Snap-fit canopy with captive mounting screws
- Directional chevrons (snap-in/snap-out)
- Installation hardware (screws, wire nuts)
- Nickel Cadmium Battery (pre-installed or separate)
4. セットアップとインストール
The APC7RG is designed for easy installation with universal J-box mounting and snap-fit construction, allowing for installation in under 5 minutes.
4.1取り付けオプション
The unit offers universal surface mounting flexibility and can be configured for:
- 天井マウント
- 壁掛け
- End mount
It supports configurable single or double faces.
Image 4.1: Key installation and performance features.
4.2配線
- 回路ブレーカーで電源がオフになっていることを確認してください。
- Connect the unit's wiring to the building's AC power supply (120V) according to local electrical codes.
- Secure the unit to the universal J-box using the provided hardware and snap-fit canopy.
4.3 Field Selectable Features
The APC7RG exit face is illuminated with long-lasting LEDs that are field selectable for red or green letters. The unit is pre-set to red letters and can be easily changed to green letters during installation. Snap-in/snap-out directional chevrons (arrows) can also be configured to indicate the direction of egress.
画像4.2: 分解図 view highlighting field-selectable features and components.
図4.3: 例ample of selectable red or green exit sign faces in commercial environments.
5. 操作手順
5.1通常の操作
When AC power is supplied, the LED exit sign will illuminate, and the battery will charge. A power indicator light (usually green) located on the bottom of the exit sign will confirm AC power is present and the battery is charging.
5.2 緊急操作
In the event of an AC power failure, the unit will automatically switch to battery backup mode. The exit sign and emergency lights will operate for a minimum of 90 minutes, providing up to 17 feet of emergency egress coverage.
5.3 テスト
A test switch is located on the bottom of the exit sign. Press and hold the test switch to simulate a power outage. The unit should switch to battery power, and the exit sign and emergency lights should illuminate. Release the switch to return to normal operation. Regular testing is recommended to ensure proper functionality.
6. メンテナンス
- バッテリー： The nickel-cadmium battery is designed for no maintenance. However, it is recommended to perform monthly 30-second functional tests and annual 90-minute discharge tests to ensure the battery holds a charge and the unit operates correctly during an emergency.
- クリーニング： ユニットの外側を柔らかくて乾いた布で拭いてください。amp 布で拭いてください。研磨剤や溶剤は使用しないでください。
- 検査： Periodically inspect the unit for any physical damage or discoloration.
7。 トラブルシューティング
一般的な問題とその解決策については、以下の表を参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Exit sign or emergency lights do not illuminate during power outage. | Battery not charged or faulty; unit not connected to AC power. | Ensure AC power is connected and indicator light is on. Allow 24 hours for initial battery charge. If problem persists, battery may need replacement. |
| 電源インジケーターが消灯しています。 | No AC power; faulty wiring; indicator light malfunction. | Check circuit breaker. Verify wiring connections. Contact a qualified electrician if necessary. |
| Emergency lights do not stay on for 90 minutes during test. | バッテリー容量が減少しました。 | Perform a full 90-minute discharge test and recharge. If run time is still insufficient, the battery may need replacement. |
8. 仕様
Key technical details for the Sure-Lites All-Pro APC7RG unit:
Image 8.1: Product dimensions and certifications.
| 特徴 | 詳細 |
|---|---|
| ブランド | シュア・ライツ |
| モデル名 | APC7RG Case Pack |
| 部品番号 | ＡＰＣ７ＲＧ |
| 材料 | High-impact, UV resistant thermoplastic (Polycarbonate) |
| 色 | White finish, Red/Green selectable light |
| 製品寸法（長さ x 幅 x 高さ） | 16.57インチ x 2.32インチ x 8.26インチ |
| 光源の種類 | 導かれた |
| 光源の数 | 2 (emergency heads) |
| ワットtage | 2.01ワット |
| 輝度 | 156ルーメン |
| 巻tage | 120ボルト |
| 電源 | コード式電気 |
| 電池のタイプ | Nickel Cadmium (NiCAD) |
| Average Battery Life (Emergency Run Time) | 90 minutes |
| Egress Coverage | 最大17フィート |
| インストールタイプ | Flush Mount (Universal J-box) |
| 認定資格 | UL 924, NEC, NFPA101, NFPA70, CEC Title 20 compliant, Damp 記載されている場所 |
| アイテム重量 | 21.4ポンド（8パック） |
9. 保証とサポート
9.1 保証情報
The Sure-Lites All-Pro APC7RG unit comes with a 5-year limited warranty. The NiCad battery carries a seven-year pro-rated warranty. Please refer to the warranty documentation included with your purchase for full terms and conditions.
9.2 カスタマーサポート
For technical assistance, replacement parts, or warranty claims, please contact Sure-Lites customer support. Contact information can typically be found on the manufacturer's webサイトまたは製品パッケージに記載されています。