URFOG FPU03ESM400A フォグジェネレータ ユーザーマニュアル

1.製品オーバーview

The URFOG FPU03ESM400A is an advanced fog generator designed to enhance security systems by rapidly deploying a dense fog, significantly reducing visibility and disorienting intruders. This device is engineered for quick response and seamless integration, particularly with AJAX alarm systems, providing an effective deterrent and delaying theft or damage.

Figure 1: URFOG FPU03ESM400A Fog Generator. This image displays the compact, white unit with 'AJAX READY' and 'UR FOG' branding, indicating its design for integration into modern security setups.

2. 主な特徴

• Rapid Fog Generation: Produces 400 m³ of fog with zero visibility in approximately 60 seconds.
• AJAX Integration: Equipped with 2 integrated AJAX relays for seamless arming and execution control.
• Visual and Audible Signaling: Features an audible signal and LED visual indicators for operational status.
• External Device Output: Provides a 12VDC 300mA output for connecting peripheral devices.
• バックアップバッテリーオプション: Supports backup batteries (2x 12VDC 2.0Ah) for continued operation during power outages。
• Adjustable Fog Shot Time: Configurable fog distribution time up to 40 seconds.
• 効率的な設計: Total launch time of 1.5 minutes with a total launch volume of 850 m³.
• グリーン電力技術: 低消費電力設計。
• Easy Refill System: Utilizes a 0.75 L single-use bag for convenient and clean fluid replacement.
• 素早い反応時間: Responds within 200 ms.

3. セットアップとインストール

Proper installation is crucial for the optimal performance and safety of your URFOG fog generator. It is recommended that installation be performed by a qualified technician.

3.1 開梱と検査

1. Carefully remove the fog generator from its packaging.
2. Inspect the unit for any signs of damage during transit. Do not install if damaged.
3. 梱包リストに記載されているすべてのコンポーネントが揃っていることを確認します。

3.2 取り付け

Mount the unit securely on a solid surface, such as a wall, at a height that allows for optimal fog dispersion and prevents tampering. Ensure adequate clearance around the unit for ventilation and maintenance access.

3.3電源接続

Connect the unit to a stable power source as per local electrical codes. The unit requires a warm-up period (less than 60 minutes) upon initial power-up to reach operational temperature.

3.4 Fog Fluid Bag Installation

1. Open the designated compartment for the fog fluid bag.
2. Insert a new 0.75 L single-use fog fluid bag, ensuring it is correctly seated and connected to the internal pump mechanism.
3. 収納部をしっかりと閉めてください。

3.5 Integration with Alarm System (AJAX)

Utilize the two integrated AJAX relays to connect the fog generator to your AJAX alarm system. One relay is typically used for arming/disarming the fog generator, and the other for triggering fog deployment upon alarm activation. Refer to your AJAX system's manual for specific wiring and configuration details.

4. 操作手順

Once installed and configured, the URFOG FPU03ESM400A operates primarily in conjunction with your alarm system.

4.1 Initial Power-Up and Warm-Up

Upon first power-up or after a prolonged power disconnection, the unit will enter a warm-up phase. The LED indicator will show its status (e.g., blinking) until it reaches operational temperature, typically within 60 minutes. Once ready, the LED will indicate a stable 'armed' or 'ready' state.

4.2 武装解除

The fog generator's arming status is typically linked to your AJAX alarm system's arming status via the integrated relays. When the alarm system is armed, the fog generator becomes active and ready to deploy fog. Disarming the alarm system will disarm the fog generator.

4.3 Fog Deployment

Fog deployment is automatically triggered by the alarm system when an intrusion is detected and the system is armed. The unit will rapidly release fog for the configured duration (up to 40 seconds) to fill the protected area, creating zero visibility conditions.

4.4 ステータスインジケータ

Observe the LED indicators and listen for audible signals to understand the unit's current status (e.g., warming up, ready, armed, low fluid, error).

5. メンテナンス

Regular maintenance ensures the reliability and longevity of your URFOG fog generator.

5.1 Replacing Fog Fluid Bag

When the unit indicates a low fluid level (via LED or alarm system notification), replace the single-use fog fluid bag as described in Section 3.4. Always use genuine URFOG fluid bags for optimal performance and to prevent damage.

5.2 Backup Battery Check (Optional)

If backup batteries are installed, periodically check their charge status and replace them as recommended by the manufacturer (typically every 3-5 years) to ensure continuous operation during power outages。

5.3 クリーニング

Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or allow liquids to enter the unit.

6。 トラブルシューティング

This section addresses common issues you might encounter with your URFOG fog generator.

6.1 No Fog Output

• 電力を確認します: Ensure the unit is properly connected to a power source and receiving power.
• ウォームアップ期間: Verify the unit has completed its warm-up cycle.
• 液面レベル: Check if the fog fluid bag is empty or incorrectly installed. Replace if necessary.
• Alarm System Connection: Confirm the AJAX relays are correctly wired and configured to trigger fog deployment.
• エラーインジケータ： Check for any error LEDs or audible signals that might indicate a fault.

6.2 ユニットが応答しない

• 電源： Ensure stable power supply. If using backup batteries, check their condition.
• Alarm System Link: Verify communication between the fog generator and the AJAX alarm system.

If issues persist after following these steps, contact qualified technical support.

7. 仕様

8. 保証とサポート

Information regarding specific warranty terms and conditions for the URFOG FPU03ESM400A fog generator was not available in the provided product data. Please refer to the official URFOG website or contact your authorized dealer for detailed warranty information and technical support.

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact the manufacturer or your product supplier.