1. はじめに
Thank you for choosing the VIANIS Motion Sensor Outdoor Wall Light Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
2. 安全情報
- Always turn off the power at the main circuit breaker before beginning installation or maintenance.
- 設置手順が不明な場合は、資格のある電気技師にご相談ください。
- すべての電気接続が現地の規則や条例に準拠していることを確認してください。
- This fixture is designed for outdoor use and is waterproof. However, avoid direct high-pressure water jets.
- Use only dimmable LED bulbs to prevent flickering issues when using dimming functions.
- 最大ワット数を超えないでくださいtage specified for the bulb (E26, MAX 100W).
3. 箱の中身
インストール前にすべてのコンポーネントが揃っていることを確認してください。
- VIANIS Motion Sensor Outdoor Wall Light Fixture
- 取り付け金具
- シェード
- 電球（付属しません）
4. 仕様
| ブランド | ヴィアニス |
| モデル番号 | バージョン8147 |
| 色 | 黒 |
| 材料 | Aluminum, Tempered Seeded Glass |
| 寸法（長さ×幅×高さ） | 長さ6.89インチ x 幅5.5インチ x 高さ12.6インチ |
| 重さ | 3.37 ポンド |
| 電源 | コード式電気 |
| 電球ベース | E26 |
| 最大ワットtage | 100W |
| 特集 | Motion Sensor, Dusk to Dawn Sensor, Dimmable, Anti-Rust, Water Resistant |
| 角度検知 | 220° |
| 最大検出範囲 | 40 FT |
Note: Bulb is not included. Dimmable LED bulbs are recommended for optimal performance with dimming features.
5. セットアップとインストール
This outdoor wall light fixture is designed for easy installation. Follow these general steps:
- インストールの準備： Turn off power at the circuit breaker. Ensure the mounting surface is clean and secure.
- 器具を取り付ける: Use the provided mounting hardware to securely attach the cross mounting plate to your wall. Connect the electrical wires (live, neutral, ground) according to standard electrical practices.
- 照明器具を取り付ける: Secure the light fixture body to the cross mounting plate.
- 電球を取り付けます。 The fixture features an open bottom design for easy bulb replacement. Insert an E26 base bulb (max 100W, dimmable LED recommended) into the socket.
- 電力を回復する： 回路ブレーカーで電源を再度オンにします。
Figure 5.1: VIANIS Motion Sensor Outdoor Wall Light Fixture installed on a brick wall.
図 5.2: 製品の寸法と主要コンポーネント。
ビデオ5.1: 終了view of the VIANIS Motion Sensor Outdoor Light Fixture and its features.
6. 操作手順
Your VIANIS outdoor light fixture features an upgraded motion sensor with multiple working modes and adjustable brightness.
6.1. One-Key Mode Switching
Switch between modes by pressing the sensor button located on top of the fixture. The indicator light will change color to confirm the selected mode:
- DIM Mode (Red Light): The light stays at a low brightness (adjustable 10%-50%) at night. When motion is detected, it brightens to 100% and returns to low brightness after motion ceases.
- エコモード（緑色のライト）： The light remains off at night. When motion is detected, it turns on at 100% brightness and turns off after motion ceases.
- D2D Mode (Blue Light): The light turns on at 100% brightness at dusk and automatically turns off at dawn. Motion sensing is not active in this mode.
Figure 6.1: One-click mode switching on the motion sensor.
6.2. Override Mode
To activate Override Mode, quickly turn the light switch OFF and then ON within 2 seconds. The light will maintain 100% brightness for approximately 8 hours, then automatically turn off at dawn and revert to the previously selected operating mode.
Figure 6.2: Manual Override Mode operation.
6.3. Brightness Adjustment (DIM Mode)
In DIM Mode, you can adjust the standby brightness between 15% and 50%. To adjust, long-press the sensor button until the desired brightness is reached.
Figure 6.3: Integrated dimmer for brightness adjustment.
6.4. Adjustable Sensing Range
The motion sensor has an ultra-wide sensing coverage of 220 degrees and an adjustable detection range up to 40 feet. The sensitivity can be adjusted to Far, Medium, or Nearest settings to suit your needs.
Figure 6.4: Ultra-wide sensing coverage and adjustable range.
7. メンテナンス
To ensure the longevity and optimal performance of your VIANIS outdoor light fixture, follow these maintenance guidelines:
- クリーニング： 定期的に柔らかい布で器具を清掃してください。amp 布で拭いてください。仕上げやガラスを傷つける可能性のある研磨剤入りの洗剤や溶剤は使用しないでください。
- 電球の交換: The fixture features an open bottom design, allowing for easy bulb replacement without tools. Simply unscrew the old bulb and screw in a new E26 base bulb (max 100W).
- 耐候性: The fixture is constructed from 100% aluminum for superior corrosion and weather resistance, making it rainproof, sunproof, windproof, and snowproof. Regular inspection for any damage from extreme weather is recommended.
Figure 7.1: Weather resistance features of the fixture.
Figure 7.2: Waterproof and Anti-rust properties.
8。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 光がちらつく | Non-dimmable bulb used with dimming function. | Replace with a dimmable LED bulb. |
| Motion sensor not detecting or over-detecting | Sensing range needs adjustment. | Adjust the sensor's detection range (Far, Medium, Nearest) as described in Section 6.4. |
| Light does not turn on at dusk (D2D mode) | Insufficient darkness detected by sensor. | Ensure the sensor is not obstructed and is in an area that receives natural light. |
| Light stays on 100% brightness constantly | Override Mode is active. | The light will automatically revert to the previous mode after approximately 8 hours or at dawn. |
9. 保証とサポート
This VIANIS product comes with a one-year limited warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For warranty claims or technical support, please contact VIANIS customer service through the retailer where the product was purchased or visit the official VIANIS web連絡先情報のサイト。