VGEBY 250W 24V DC Wheelchair Motor Instruction Manual

1. はじめに

This instruction manual provides comprehensive information for the VGEBY 250W 24V DC Wheelchair Motor, Model VGEBYdrnse4i1t9. It covers essential safety guidelines, product features, technical specifications, installation procedures, operational instructions, and maintenance recommendations. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the motor.

2. 安全情報

怪我や製品の損傷を防ぐために、常に以下の安全上の注意事項を守ってください。

• 電気安全: Ensure the power supply matches the motor's rated voltage (24V). Disconnect power before any installation, maintenance, or repair work.
• 専門家による設置: 正しい配線と取り付けを確実に行うために、設置は資格のある人が行う必要があります。
• 過負荷を避ける: Do not exceed the motor's rated output power (250W) or current (13.4A) to prevent overheating and damage.
• 環境条件: Operate the motor within appropriate environmental conditions. Avoid exposure to excessive moisture or extreme temperatures.
• 検査： Regularly inspect the motor and its connections for any signs of wear, damage, or loose wiring.

3.製品オーバーview および機能

The VGEBY DC Wheelchair Motor is designed for electric wheelchairs, offering reliable performance and efficiency. Key features include:

• Brushed Design: Features a brushed motor design for low heat generation, compact structure, durability, and extended service life.
• 静かな動作: Utilizes a premium carbon brush for quieter operation.
• 純銅線: Constructed with pure copper wire and a thickened wire design for enhanced safety and performance.
• High Torsion: Engineered for large torsion, ensuring high efficiency and power saving.

図3.1: 前面 view of the VGEBY 250W 24V DC Wheelchair Motor, showing the motor body, gearbox, and output shaft.

図3.2: トップダウン view of the VGEBY 250W 24V DC Wheelchair Motor, highlighting the motor's compact design.

図3.3: 背面 view of the VGEBY 250W 24V DC Wheelchair Motor, showing the electrical connector.

4. 仕様

The following table details the technical specifications of the VGEBY Wheelchair Motor:

5. セットアップとインストール

Proper installation is crucial for the motor's performance and safety. It is recommended that installation be performed by a qualified technician.

1. 準備： Ensure the wheelchair is powered off and secured to prevent accidental movement during installation. Gather all necessary tools.
2. 取り付け: Securely mount the motor to the designated location on the electric wheelchair frame. Ensure all mounting bolts are tightened to the manufacturer's specifications.
3. 電気接続: Connect the positive and negative lines of the motor to the corresponding terminals of the power supply (24V DC). Double-check all connections for polarity and tightness.
4. ケーブル管理 Route all cables safely, ensuring they are not pinched, stretched, or exposed to moving parts. Use cable ties to secure them.
5. 初期チェック: フルパワーを適用する前に、すべての接続と取り付けポイントを目視検査してください。

図 5.1: 拡大図 view of the motor's output shaft and mounting points, essential for proper installation.

6. 操作

Once the motor is correctly installed and connected to a 24V DC power supply, it is ready for operation. The motor functions by receiving power through its positive and negative lines. The speed and direction of the wheelchair will be controlled by the wheelchair's main control unit, which sends appropriate signals to the motor. Ensure the wheelchair's control system is functioning correctly before operating.

7. メンテナンス

Regular maintenance helps ensure the longevity and optimal performance of your VGEBY Wheelchair Motor.

• クリーニング： Keep the motor free from dust, dirt, and debris. Use a soft, dry cloth to wipe the exterior. Avoid using harsh chemicals or excessive moisture.
• 接続チェック: Periodically inspect all electrical connections for tightness and corrosion. Re-tighten any loose connections.
• 物理検査: Check the motor housing and mounting points for any signs of damage, cracks, or unusual wear.
• プロフェッショナルサービス: For internal components or complex issues, consult a qualified service technician. Do not attempt to disassemble the motor unless you are trained to do so.

8。 トラブルシューティング

If you encounter issues with your VGEBY Wheelchair Motor, consider the following basic troubleshooting steps:

• モーターが作動しない:
  • Check if the power supply is connected and providing the correct 24V DC.
  • すべての電気接続が安全であり、腐食がないことを確認します。
  • Ensure the wheelchair's control system is powered on and functioning.
• 異常な音や振動：
  • Inspect for any loose mounting bolts or foreign objects near the motor or gearbox.
  • If the noise persists, discontinue use and consult a qualified technician.
• 過熱：
  • Ensure the motor is not operating under excessive load.
  • Check for proper ventilation around the motor.
  • If overheating continues, there may be an internal issue; seek professional assistance.

これらの手順で解決されない問題については、カスタマー サポートにお問い合わせください。

9. 保証とサポート

VGEBY provides a service guarantee for this product. If you are not satisfied with the Wheelchair DC Motor, you can contact us by email at any time. We are committed to replying and solving your problem promptly and striving to provide better service. Please refer to your purchase documentation for specific warranty terms and contact information.

さらに詳しいサポートについては、 VGEBY Store or contact customer support through your retailer.