CREWORKS 2L Digital Ultrasonic Cleaner User Manual

1. はじめに

Thank you for choosing the CREWORKS 2L Digital Ultrasonic Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.

2. 安全に関する注意事項

怪我や装置の損傷を防ぐために、常に次の安全上の注意事項を守ってください。

• ユニットを分解しないでください。
• 無人で使用しないでください。
• Always use sufficient fluid in the tank.
• Unplug before filling or draining.
• タンクに液体が入っていない状態でユニットを操作しないでください。
• お子様の手の届かない場所に保管してください。
• 本体を水などの液体に浸さないでください。
• Use only appropriate cleaning solutions. Avoid flammable or corrosive liquids.
• 電源コードが損傷しておらず、アースされたコンセントに正しく接続されていることを確認してください。

Figure 2.1: The CREWORKS 2L Digital Ultrasonic Cleaner with its warning label, emphasizing safety precautions.

3.製品オーバーview および機能

The CREWORKS 2L Digital Ultrasonic Cleaner is designed for efficient and thorough cleaning of various items using ultrasonic technology. It features a durable stainless steel tank, digital controls, and multiple cleaning modes.

3.1 主な特徴

• 2L容量： Suitable for a wide range of items.
• 60W Ultrasonic Power: Provides effective cavitation for deep cleaning.
• 100W Heating Function: Allows for temperature adjustment (20-80℃) to enhance cleaning.
• デジタルコントロール: Intuitive panel for setting time (0-99 min) and temperature.
• Degassing Mode: Eliminates gas bubbles for improved cavitation efficiency.
• 7 Levels of Oscillation: Adjustable intensity for delicate to robust cleaning.
• 静かな動作: Thick tank design reduces noise to below 60 dB.
• 3つのクリーニングモード: Quick, Standard, and Deep for varied cleaning needs.
• 304 Stainless Steel Tank: Ensures durability and food-grade safety.
• Transparent Acrylic Lid: Allows real-time observation of the cleaning process.

Figure 3.1: Close-up of the digital control panel, highlighting the time and temperature displays, and control buttons.

Figure 3.2: Illustration of the ultrasonic cleaning principle, showing the formation, expansion, and bursting of microscopic bubbles for effective cleaning.

4. セットアップ

Follow these steps to set up your ultrasonic cleaner:

1. 開梱: ユニットをパッケージから慎重に取り出し、損傷がないか確認してください。
2. 配置: Place the cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation.
3. 電源接続: Connect the power cord to the unit and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before plugging in.
4. タンクの充填: Open the lid and fill the stainless steel tank with the appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks. Do not overfill or underfill.
5. バスケットを挿入: 使用する場合、洗浄バスケットをタンク内に置きます。

Figure 4.1: The ultrasonic cleaner with its lid open, showing the stainless steel tank and the included cleaning basket.

5. 操作手順

Operating your CREWORKS ultrasonic cleaner is straightforward:

5.1 基本操作

1. 電源オン: Turn on the main power switch located at the back or side of the unit. The digital display will illuminate.
2. アイテムを配置する: Carefully place the items to be cleaned into the cleaning basket, ensuring they are fully submerged in the solution but not touching each other or the tank bottom directly.
3. 温度設定（オプション）: Press the "T/°C" button to adjust the desired cleaning temperature (20-80℃) using the up/down arrows. Heating will begin automatically.
4. 時間設定: Use the "TIME" up/down arrows to set the cleaning duration (0-99 minutes).
5. モードを選択（オプション）: Choose from "QUICK" (5 min), "STD" (15 min), or "EXT" (30 min) preset modes if desired.
6. クリーニングを開始します: Press the "START" button to begin the ultrasonic cleaning cycle. The display will show the remaining time.
7. サイクルの終了: タイマーがゼロになると、ユニットは自動的に停止します。
8. アイテムを削除: Carefully remove the cleaning basket and rinse the cleaned items under clean water.
9. 電源を切る： Turn off the main power switch and unplug the unit when not in use.

5.2 Degassing Mode

The Degassing mode removes air bubbles from the cleaning solution, which can interfere with ultrasonic cavitation, making the cleaning process more efficient, especially with new solutions. Press the "DEGAS" button to activate this mode. It is recommended to run degassing for a few minutes before starting a cleaning cycle with fresh solution.

Figure 5.1: Visual representation of the degassing process, where air bubbles are removed from the cleaning solution to optimize ultrasonic performance.

5.3 Adjustable Oscillation

The unit offers 7 levels of oscillation intensity. This allows you to select a gentler cleaning for delicate items or a more powerful one for heavily soiled objects. Adjust the oscillation intensity using the dedicated knob or buttons on the control panel, if available, or by selecting the appropriate cleaning mode.

Figure 5.2: Illustration demonstrating the 7-level oscillation adjustment, allowing users to customize cleaning intensity for various items, from delicate jewelry to robust tools.

6. メンテナンスとケア

適切なメンテナンスを行うことで、超音波洗浄機の寿命が長くなり、最適なパフォーマンスが確保されます。

• タンクの排水: After each use, especially if the solution is dirty, unplug the unit and carefully drain the liquid from the tank.
• タンクのクリーニング: Wipe the inside of the tank with a soft cloth. For stubborn residues, use a mild detergent and rinse thoroughly. Do not use abrasive cleaners.
• 外装清掃: ユニットの外装を広告で拭きますamp 布で拭いてください。強い化学薬品は使用しないでください。
• ストレージ： Store the unit in a cool, dry place when not in use. Ensure the tank is empty and dry.
• 定期点検: 電源コードとプラグに損傷の兆候がないか定期的に確認してください。

Figure 6.1: Demonstrates the visible cleaning effect of the ultrasonic cleaner on items like glasses, razor blades, and circuit boards, showing their improved cleanliness after use.

7。 トラブルシューティング

If you encounter issues with your ultrasonic cleaner, refer to the following table:

8. 仕様

Detailed technical specifications for the CREWORKS 2L Digital Ultrasonic Cleaner:

Figure 8.1: Dimensional diagram of the ultrasonic cleaner and its cleaning basket, providing precise measurements for planning and usage.

9. 保証情報

This product comes with a standard manufacturer's warranty. For details regarding warranty coverage, duration, and claims, please refer to the warranty card included with your purchase or contact CREWORKS customer support directly. Keep your proof of purchase for warranty validation.

10. カスタマーサポート

For any questions, technical assistance, or service requests, please contact CREWORKS customer support. Contact information can typically be found on the product packaging, the official CREWORKS webサイトまたは購入場所からご購入いただけます。

メーカー: クレワークス

ASIN: B0CTSVGC2Z