導入
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your CREWORKS 60W Stainless Steel Ultrasonic Cleaning Machine. Please read this manual thoroughly before initial use and retain it for future reference.
安全に関する注意事項
To ensure safe operation and prevent damage to the unit or injury, observe the following safety precautions:
- 分解しないでください: Attempting to disassemble the unit may result in electric shock or damage.
- Do not use unattended: Always supervise the cleaner during operation.
- Always use sufficient fluid: Ensure the tank is filled to the appropriate level before operation to prevent damage to the ultrasonic transducers.
- Unplug before filling & draining: Disconnect the power cord from the outlet before adding or removing cleaning solution.
- ユニットを子供やペットから遠ざけてください。
- クリーナー本体を水やその他の液体に浸さないでください。
- 不燃性の洗浄液のみを使用してください。
- Ensure the unit is placed on a stable, level, and heat-resistant surface.
図1: 前面 view of the CREWORKS Ultrasonic Cleaner, showing the control panel and a yellow warning label with safety instructions.
製品の特徴
- Large Volume: 2L (1/2 gallon) tank capacity, suitable for various items.
- 強力な超音波洗浄： 60W ultrasonic power generates cavitation bubbles for thorough cleaning.
- 一体型ヒーター: 100W heating power with temperature control from 70 to 175°F (20-80°C) to enhance cleaning effectiveness.
- 簡単なコントロール: Two convenient knobs for setting cleaning time (1-30 minutes) and temperature.
- 耐久性のある構造: Made of stainless steel, with 304 banding for the tank and basket, and 201 banding for the exterior, ensuring longevity.
- 多用途アプリケーション: Effectively cleans jewelry, glasses, lab tools, auto parts, and other intricate items without harsh chemicals.
- 安全機能: Non-skid rubber feet for stability and multiple dissipation holes for reliable performance.
Figure 2: The CREWORKS Ultrasonic Cleaning Machine shown with examples of items it can clean, such as small crevices, worn lenses, and delicate objects.
Figure 3: A diagram explaining the powerful ultrasonic cavitation process, showing how bubbles form, expand, and burst to clean surfaces.
Figure 4: Visual demonstration of the cleaning effect, displaying before and after images of eyeglasses, a razor blade, and a circuit board.
設定
- 開梱： Carefully remove the ultrasonic cleaner and all accessories from the packaging. Inspect for any shipping damage.
- 配置: Place the unit on a firm, level, and dry surface, ensuring adequate ventilation around the machine. Avoid placing it near heat sources or in direct sunlight.
- 充填タンク： Ensure the unit is unplugged. Fill the stainless steel tank with the appropriate cleaning solution. Do not exceed the "MAX" fill line. Ensure the items to be cleaned are fully submerged.
- バスケットを挿入: Place the stainless steel cleaning basket into the tank. This basket helps protect items and the tank from direct contact.
- 接続電源： 電源コードをアース付きコンセントに差し込みます。
操作手順
The CREWORKS Ultrasonic Cleaner features intuitive knob controls for easy operation.
- アイテムをロード: Place the items to be cleaned into the cleaning basket. Ensure items are not overcrowded and have space for the solution to circulate.
- 設定温度: を回す 温度 knob to select the desired heating temperature (70-175°F / 20-80°C). The "HEATING" indicator light will illuminate when heating is active. For optimal cleaning, pre-heating the solution is often recommended.
- 時間設定: を回す 時間 knob to select the desired cleaning duration (1-30 minutes). The "CLEANING" indicator light will illuminate when the ultrasonic function is active.
- クリーニングを開始します: The unit will begin heating and/or cleaning according to your settings. The ultrasonic process will generate a slight humming sound.
- 進捗状況を監視する: Allow the cleaning cycle to complete. The unit will automatically stop the ultrasonic function when the timer reaches zero. The heating function will continue until manually turned off or the set temperature is reached.
- アイテムを削除: Once the cycle is complete, unplug the unit. Carefully lift the basket out of the tank and rinse the cleaned items under clean water.
- 電源を切る： Turn both the TEMPERATURE and TIME knobs to the "OFF" position.
Figure 5: The control panel of the ultrasonic cleaner, highlighting the temperature and time adjustment knobs for convenient and efficient operation.
メンテナンス
定期的なメンテナンスにより、超音波洗浄機の寿命が長くなり、最適なパフォーマンスが確保されます。
- タンクの排水: After each use, especially if the solution is dirty, unplug the unit and carefully pour out the used cleaning solution. Avoid spilling liquid on the control panel or exterior.
- タンクのクリーニング: Wipe the inside of the stainless steel tank with a soft cloth to remove any residue. For stubborn deposits, use a mild, non-abrasive cleaner. Rinse thoroughly.
- 外装清掃: ユニットの外装を広告で拭きますamp 布で拭いてください。研磨剤入りの洗剤を使用したり、本体を水に浸したりしないでください。
- ストレージ： Store the cleaner in a cool, dry place when not in use. Ensure the tank is completely dry before storage.
- ヒューズの交換: The unit is equipped with protective fuses. If the unit fails to power on, check and replace the fuses located near the power inlet if necessary. Always use fuses of the correct rating.
図6: クローズアップ view of the food-grade 304 stainless steel tank, emphasizing its durable and easy-to-clean surface.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ユニットの電源が入りません。 | 電源が供給されていません。ヒューズが切れています。電源スイッチがオフになっています。 | Check power cord connection and wall outlet; Replace fuse (refer to Maintenance section); Ensure power switch is in the ON position. |
| Ultrasonic function not working (no humming sound). | Insufficient water level; Timer not set; Unit malfunction. | Ensure water level is above MIN line; Set the TIME knob; Contact customer support if problem persists. |
| 加熱機能が動作しません。 | Temperature knob not set; Heating element malfunction. | Set the TEMPERATURE knob; Allow sufficient time for heating; Contact customer support if problem persists. |
| 洗浄結果が悪い。 | Incorrect cleaning solution; Insufficient cleaning time/temperature; Overloaded tank; Items not fully submerged. | Use appropriate ultrasonic cleaning solution; Increase cleaning time or temperature; Reduce number of items; Ensure items are fully submerged. |
仕様
- モデル： 2L Knob Style
- タンク容量： 2 L (1/2 gal.)
- 超音波パワー： 60W
- 火力： 100W
- 超音波周波数： 40kHz
- タイマー範囲： 1～30分
- 温度範囲: 70〜175°F（20〜80°C）
- 材料： 304 Stainless Steel (Tank & Basket), 201 Stainless Steel (Exterior)
- 全体寸法: 6.9 x 6.7 x 8.3インチ
- 製品重量: 5.51 ポンド
- メーカー: クレワークス
Figure 7: Detailed specifications and dimensions of the CREWORKS Ultrasonic Cleaner and its included basket.
保証とサポート
For warranty information, technical support, or any questions regarding your CREWORKS Ultrasonic Cleaning Machine, please contact CREWORKS customer service. Refer to the product packaging or the official CREWORKS web連絡先の詳細についてはサイト。
Webサイト： CREWORKS Official Store