Kircuit AC/DC Adapter

Kircuit AC/DC Adapter Instruction Manual

Compatible with NordicTrack RW300 Rowing Machine and similar models

製品終了view

The Kircuit AC/DC Adapter is designed to provide reliable power to your compatible devices, specifically NordicTrack RW300 series rowing machines. This adapter converts standard AC wall power into the DC power required by your equipment, enabling operation and battery charging (if applicable to your device).

主な機能は次のとおりです。

  • Input: 100V-240V AC, suitable for various power outlets.
  • Built-in Dynamic IC, Charger IC, and power fuse for rapid charging and overcharge protection.
  • High-quality construction for durability and consistent performance.
Kircuit AC/DC Adapter showing input and output specifications

Image: The Kircuit AC/DC Adapter, displaying its label with input (100-240V AC, 50/60Hz, 0.3A) and output specifications.

安全情報

Please read and follow these safety guidelines to prevent damage to the adapter or your device, and to ensure personal safety:

  • Use the adapter only with compatible devices as specified.
  • ボリュームを確保するtage and current requirements of your device match the adapter's output.
  • アダプタを水、湿気、または極端な温度にさらさないでください。
  • アダプタを落としたり、強い衝撃を与えたりしないでください。
  • Do not attempt to open or modify the adapter. There are no user-serviceable parts inside.
  • 長期間使用しない場合は、アダプタを壁のコンセントから抜いてください。
  • お子様の手の届かない場所に保管してください。

設定

Follow these steps to connect your Kircuit AC/DC Adapter to your device:

  1. アダプターを検査します。 ご使用前に、アダプターとケーブルに損傷がないか目視で確認してください。損傷がある場合は使用しないでください。
  2. デバイスに接続します: Locate the power input port on your NordicTrack RW300 rowing machine (or other compatible device). Insert the barrel plug connector of the Kircuit adapter firmly into this port.
  3. 電源コンセントに接続します。 Plug the AC prongs of the adapter into a standard 100-240V AC wall outlet. Ensure the outlet is easily accessible.
  4. 接続を確認します: Confirm that both connections are secure. Your device should now receive power.
Kircuit AC/DC Adapter with its power cord and barrel plug

Image: The Kircuit AC/DC Adapter with its attached power cord, highlighting the barrel plug connector and the approximately 6.5 ft cord length.

操作手順

Once the Kircuit AC/DC Adapter is properly connected to both your device and a power outlet, it will automatically supply power. There are no additional controls or settings on the adapter itself.

  • Ensure the device is turned on using its own power switch, if applicable.
  • The adapter is designed for continuous use within its specified limits.
  • If your device has a battery, the adapter will charge it while simultaneously powering the device.
Kircuit AC/DC Adapter plugged into a power strip

Image: The Kircuit AC/DC Adapter plugged into a white power strip on a desk, demonstrating a typical operational setup.

メンテナンス

Proper care will extend the life of your Kircuit AC/DC Adapter:

  • クリーニング: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • ストレージ: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly wrapping the cord, which can cause damage over time.
  • ケーブルのお手入れ: Do not bend, twist, or pinch the power cord excessively. Avoid placing heavy objects on the cord.

トラブルシューティング

If you encounter issues with your Kircuit AC/DC Adapter, refer to the following common troubleshooting steps:

デバイスに電源が供給されていません

  • 接続を確認してください: Ensure the adapter's barrel plug is fully inserted into your device's power port and the AC prongs are securely plugged into a working wall outlet.
  • テストコンセント: Plug another known working appliance into the same wall outlet to confirm the outlet is functional.
  • アダプタの検査: Look for any visible damage to the adapter casing or cable. If damaged, discontinue use.
  • Device Power Switch: Confirm that your device's power switch (if it has one) is in the 'ON' position.
  • 互換性: Double-check that the adapter is indeed compatible with your specific device model.

これらの手順で問題が解決しない場合は、カスタマー サポートにお問い合わせください。

仕様

ブランドキルクイト
入力ボリュームtage100-240V AC
入力電流0.3A(最大)
出力Refer to adapter label for specific output voltage and current for your model.
コネクタタイプバレルプラグ
対応デバイスNordicTrack RW300, NTRW39121C.0, NTRW39121-INT.0, NTRW39121-INT, NTRW39121, NTRW39121C, RW-300 Rowing/Rower Machine
コードの長さ約6.5フィート
含まれるコンポーネントACアダプターX 1

保証とサポート

For warranty information or technical support regarding your Kircuit AC/DC Adapter, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. Contact details can typically be found on the product packaging or the manufacturer's official webサイト。

This manual is for informational purposes only. Kircuit and its affiliates are not responsible for any damages or injuries resulting from improper use of this product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.