1.製品オーバーview
The Logitech Rally Microphone Pod Coupler (Model 952-000181) is designed to extend the reach of Logitech Rally Mic Pods in video conferencing setups. This coupler allows for the use of standard Cat 6 Ethernet cables to connect Rally Mic Pods, providing flexibility in microphone placement and ensuring optimal audio coverage in meeting spaces. It facilitates a clean and organized installation by utilizing existing network cabling infrastructure.
An image showing the Logitech Rally Microphone Pod Coupler, a small gray rectangular device with a female USB-C port, connected to a gray USB-C cable. Two additional coupler units are visible to the right, demonstrating the male and female ends for connecting Cat 6 Ethernet cables.
2. セットアップ手順
Follow these steps to properly set up your Logitech Rally Microphone Pod Coupler:
- コンポーネントを識別する: Ensure you have the Rally Microphone Pod Coupler units and a suitable Cat 6 Ethernet cable of the desired length.
- Connect to Mic Pod: Take one coupler unit. Connect the USB-C end of the coupler to the USB-C port on your Logitech Rally Mic Pod.
- イーサネットケーブルを接続します: Insert one end of the Cat 6 Ethernet cable into the RJ45 port of the coupler connected to the Mic Pod.
- Connect to Rally System: Take the second coupler unit. Connect the other end of the Cat 6 Ethernet cable to the RJ45 port of this second coupler unit.
- Connect to Rally Hub/Table Hub: Connect the USB-C end of the second coupler unit to an available USB-C microphone input port on your Logitech Rally Table Hub or Rally Display Hub.
- 接続を確認します: Once all connections are made, the Rally system should automatically detect the connected microphone pod. Refer to your Rally system's documentation for status indicators.
3. Operating the Coupler
The Logitech Rally Microphone Pod Coupler is a passive device designed to extend the physical reach of your Rally Mic Pods. It does not require any specific operational steps beyond proper installation. Once correctly connected, the coupler facilitates the seamless extension of your Rally Mic Pods, allowing them to function as intended from their new placement. The audio signal is transmitted through the Cat 6 Ethernet cable, maintaining signal integrity.
4. メンテナンス
The Rally Microphone Pod Coupler requires minimal maintenance to ensure long-term performance:
- クリーニング： Use a soft, dry, lint-free cloth to gently wipe the exterior of the coupler. Avoid using abrasive cleaners, solvents, or aerosol sprays, which may damage the surface or internal components.
- ストレージ： When not in use, store the coupler in a cool, dry place, away from direct sunlight and extreme temperatures.
- 取り扱い： Avoid dropping the coupler or subjecting it to strong impacts, as this can damage the internal circuitry or connectors.
- コネクタのお手入れ: Ensure the USB-C and RJ45 ports are free of dust and debris. Do not force connectors into ports.
5。 トラブルシューティング
If you encounter issues with your Logitech Rally Microphone Pod Coupler, consider the following troubleshooting steps:
- No Audio or Intermittent Connection:
- すべての接続を確認: Ensure that both coupler units are securely connected to the Rally Mic Pod and the Rally Hub/Display Hub, and that the Cat 6 Ethernet cable is firmly seated in both coupler units.
- ケーブルの整合性を確認する: Inspect the Cat 6 Ethernet cable for any visible damage (kinks, cuts, frayed ends). Test with a different, known-good Cat 6 cable if possible.
- 互換性の確認: Ensure that the coupler is being used with genuine Logitech Rally Mic Pods and a compatible Logitech Rally system.
- 電源サイクル: Power cycle your entire Logitech Rally system (Rally Hub, Display Hub, and Mic Pods) to reset connections.
- 物理的ダメージ: If the coupler appears physically damaged, it may need to be replaced. Do not attempt to repair it yourself.
If these steps do not resolve the issue, please contact Logitech customer support for further assistance.
6. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ロジテック |
| モデル名 | Rally Microphone Pod CAT Coupler |
| 商品型番 | 952-000181 |
| 欧州連合 | 097855195180 |
| コネクタタイプ | USB Type C (to Mic Pod/Hub), RJ45 (for Cat 6 Ethernet) |
| ケーブルタイプ | Patch Cable (requires external Cat 6 Ethernet cable) |
| 対応デバイス | Logitech Rally Microphone Systems |
| 色 | 黒鉛 |
| 製品寸法 | 2.28 x 0.87 x 0.59 inches (per coupler unit) |
| アイテム重量 | 2.4 ounces (total for two couplers and short cable) |
| イーサネットケーブルカテゴリ | Cat 6 (user-supplied) |
7. 保証とサポート
This Logitech product is covered by a limited hardware warranty. For specific warranty terms and conditions, please refer to the warranty information provided with your original Logitech Rally system or visit the official Logitech website. For technical support, troubleshooting guides, and additional product information, please visit the ロジクール サポートページ or contact Logitech customer service directly.