IXITAB KWS-2301C Multi-Function Digital Display DC Voltage 電流計 電力計 ユーザーマニュアル

1. はじめに

This manual provides instructions for the safe and effective operation of the IXITAB KWS-2301C Multi-Function Digital Display DC Voltage Ammeter Power Meter. This device is designed to measure and display various electrical parameters for Type-C cell phone charging and other DC applications.

2. 安全情報

• 入力ボリュームを確認するtage and current are within the specified operating range (DC 4-30V, 0-12A).
• デバイスを分解したり改造したりしないでください。
• Avoid exposure to extreme temperatures, moisture, or corrosive environments.
• お子様の手の届かない場所に保管してください。
• Use only with compatible Type-C devices and power sources.

3.製品オーバーview

The KWS-2301C is a compact, multi-functional tester featuring a 0.77-inch OLED HD display and a 12A high-current terminal. It is designed for real-time monitoring of charging voltage, current, power, energy, capacity, and timing.

図3.1: フロント view of the IXITAB KWS-2301C tester, showing its compact design and OLED display.

3.1 主な特徴

• 0.77-inch OLED HD Display for clear visibility.
• 12A High Current Terminal for stable performance.
• Metal shell for dustproof and drop-proof durability.
• Full interface compatibility (Type-C).
• Two-way current test function.
• Real-time charging power detection and fast charging test support.

図3.2: The KWS-2301C highlighting its 0.77-inch OLED HD display and 12A high current terminal, ensuring full interface compatibility.

4. セットアップ

1. 電源に接続します： Insert the male Type-C connector of the KWS-2301C into a compatible DC power source (e.g., a wall charger, power bank, or computer USB-C port).
2. デバイスの接続： Insert the Type-C charging cable of the device you wish to test (e.g., cell phone, tablet) into the female Type-C port on the KWS-2301C.
3. 電源オン: The device will automatically power on and display readings once connected.

5. 操作手順

5.1表示モード

The KWS-2301C features two display orientations for convenient viewing。

図5.1: The KWS-2301C demonstrating its ability to switch between two display orientations for optimal viewing。

5.2 Changing Display Orientation

To change the display orientation, ボタンをダブルクリック located on the side of the device. This will rotate the display content by 180 degrees.

5.3 読み物の解釈

The OLED display shows multiple parameters simultaneously:

• 巻tage（V）： 現在のDCボリュームを表示しますtage.
• 電流 (A): 現在のDCを表示します amperage。
• 電力（W）: Displays the real-time power consumption (Voltag例: 現在)。
• タイミング（H）： Records the elapsed time of the measurement.
• 容量（mAh）： Accumulates the total charge transferred.
• Electrical Energy (Wh): Accumulates the total energy consumed.

6. メンテナンス

• クリーニング： 柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
• ストレージ： デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• 取り扱い： The metal shell provides durability, but avoid dropping or subjecting the device to severe impacts.

7。 トラブルシューティング

7.1 No Display/No Readings

• Ensure the device is properly connected to both the power source and the load.
• Verify that the power source is active and providing voltage within the specified range (DC 4-30V).
• Check for any damage to the Type-C connectors or cables.

7.2 不正確な読み取り

• すべての接続が安全であり、破片がないことを確認してください。
• Test with a different power source or load to isolate the issue.
• Readings may vary slightly depending on cable quality and device being charged.

8. 仕様

図8.1: Dimensional drawing of the KWS-2301C, showing its compact size.

9. 保証とサポート

For warranty information and technical support, please refer to the documentation provided with your purchase or contact IXITAB customer service through their official channels. Specific warranty terms may vary by region and retailer.