取扱説明書

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of the IXITAB KWS-AC301/KWS-AC300 Digital AC Power Energy Meter. This device is designed to accurately measure and display AC voltage, current, active power, energy (kWh), and temperature. It is suitable for monitoring electrical parameters in various AC circuits.

2. 安全情報

警告： Electrical shock hazard. Installation and servicing should only be performed by qualified personnel. Failure to follow these instructions may result in serious injury or death.

• Ensure the power supply is disconnected before installation or wiring.
• 指定された容量を超えないでくださいtage and current ratings (AC 50-300V, 100A).
• 濡れた状態や濡れた状態でデバイスを操作しないでください。amp 条件。
• デバイスを可燃物から遠ざけてください。
• 電源を入れる前に、すべての接続が安全かつ正しいことを確認してください。

3.製品オーバーview

The KWS-AC301/KWS-AC300 meter features a clear digital display for simultaneous monitoring of multiple electrical parameters. It is compact and designed for easy integration into electrical panels or systems.

Figure 3.1: Product image placeholder. This image indicates that a specific product image is not available. The actual product is a compact digital meter designed for AC electrical measurements.

主な機能は次のとおりです。

• Real-time measurement of AC Voltage (V), Current (A), Active Power (W), and Energy (kWh).
• 温度表示。
• High accuracy and stability.
• 読みやすいデジタル表示。

4. セットアップと配線

Before proceeding, ensure the main power supply is OFF.

1. 取り付け: Choose a suitable location for the meter, typically within an electrical panel or enclosure, ensuring adequate ventilation.
2. 巻tage Input (L/N): AC ボリュームを接続しますtage input wires to the designated L (Live) and N (Neutral) terminals on the meter. Ensure the voltage is within the 50-300V AC range.
3. 変流器（CT）接続：
   • Pass the load wire (the wire carrying the current you wish to measure) through the hole of the external current transformer (CT).
   • Connect the two small wires from the CT to the dedicated CT input terminals on the meter. Pay attention to polarity if indicated, though many simple CTs are non-polar for measurement.
4. 負荷接続: Ensure the load is correctly connected to the circuit being monitored.
5. 電源オン: After all connections are verified and secure, restore power to the circuit. The meter should power on and display readings.

Note: The CT must be connected before applying power to the meter to avoid damage. Do not disconnect the CT while power is applied to the meter.

5. 操作手順

Once powered on, the KWS-AC301/KWS-AC300 meter will automatically begin displaying the measured parameters. The display typically cycles through or shows simultaneously:

• 巻tage（V）： Displays the current AC voltage.
• 電流 (A): Displays the current AC amperage flowing through the monitored circuit.
• 有効電力（W）: Displays the instantaneous active power consumed by the load.
• エネルギー（kWh）: Accumulates the total energy consumed over time. This value is typically non-volatile and retained even after power loss.
• 温度（°C/°F）: Displays the ambient temperature measured by the device.

Some models may include a button for resetting the energy (kWh) reading. If present, press and hold the button for approximately 5 seconds to clear the accumulated energy data. Refer to specific product markings for button functionality.

6. メンテナンス

The KWS-AC301/KWS-AC300 meter requires minimal maintenance.

• クリーニング： 柔らかく乾いた布を使用してディスプレイとcを清掃してください。asing. 研磨剤入りの洗剤や溶剤は使用しないでください。
• 検査： 配線接続が安全に保たれていることを確認するために定期的に配線接続を点検してください。
• ストレージ： If storing the device for an extended period, keep it in a dry, cool environment, away from direct sunlight and extreme temperatures.

7。 トラブルシューティング

8. 仕様

9. 保証とサポート

This product is manufactured by IXITAB. For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly through the platform where the product was purchased. Please have your purchase details and product model number (KWS-AC301/KWS-AC300) ready when contacting support.

For further assistance, you may refer to the product listing on アマゾン.