KINGGERI KG2-7711
KINGGERI Lockable Roof Rack Cross Bars Instruction Manual
Model: KG2-7711
Brand: KINGGERI
1. はじめに
Thank you for choosing KINGGERI Lockable Roof Rack Cross Bars. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new roof rack system. Designed for durability and security, these cross bars enhance your vehicle's cargo carrying capabilities.
The KINGGERI roof rack cross bars are engineered with a metal mechanism lock system for enhanced anti-theft security and boast a maximum load capacity of 260 lbs (118 kg). The aerodynamic design helps to minimize wind resistance and noise during travel.

Image 1.1: KINGGERI Lockable Roof Rack Cross Bars on a Ford Explorer.
2. 車両の互換性
These KINGGERI roof rack cross bars are specifically designed as replacements for the following Ford Explorer models:
- Ford Explorer 2020
- Ford Explorer 2021
- Ford Explorer 2022
- Ford Explorer 2023
- Ford Explorer 2024
- Ford Explorer 2025
Important: This product is compatible ONLY with Ford Explorer models equipped with RAISED SIDE ROOF RAILS. Please verify your vehicle's roof rail type before installation.

Image 2.1: Compatibility illustration for Ford Explorer models with raised side rails.
3. 箱の中身
Please ensure all components listed below are present before beginning installation:
- Front Crossbar (1) - より長い
- Rear Crossbar (1) - 短い
- ブラケット(4)
- 取扱説明書(1)
- 六角レンチ (2)
- Screws (set)
- Spare Screws (set)
- キー(2)

Image 3.1: Package contents of the KINGGERI Roof Rack Cross Bars.
4. セットアップとインストール
Installation of the KINGGERI roof rack cross bars is designed to be straightforward. Follow these steps carefully:
- フロントバーとリアバーを識別します。 The front crossbar is longer than the rear crossbar to accommodate the vehicle's roof curvature. The bars are labeled 'Front' and 'Rear' to assist with correct placement.
- ブラケットを取り付ける: Securely attach the four brackets to the ends of the crossbars using the provided screws and Allen wrench. Ensure the brackets are oriented correctly to clamp onto your vehicle's raised side rails.
- クロスバーの位置: Place the assembled front crossbar onto the front section of your vehicle's raised side rails. Repeat for the rear crossbar.
- 幅を調整: The width of each crossbar can be adjusted to fit your vehicle's specific dimensions. Slide the brackets along the crossbar until they align perfectly with your vehicle's side rails.
- Secure to Side Rails: Using the heavy-duty clamping design, securely fasten the brackets to the existing side rails. Tighten all screws evenly until the crossbars are firmly in place and do not move.
- システムをロックする: Utilize the metal mechanism lock system on each bracket to secure the crossbars and deter theft. Use the provided keys to lock and unlock.
- 最終チェック: Before driving, gently shake each crossbar to ensure it is securely mounted and there is no excessive movement.
Caution: Do not overtighten screws. Ensure all components are properly aligned and secured before use.
5. 運用ガイドライン
5.1 耐荷重
The KINGGERI roof rack cross bars have a maximum load capacity of 260ポンド(118kg). Do not exceed this weight limit. Distribute the load evenly across the cross bars to maintain vehicle stability and prevent damage.
5.2 貨物の固定
The four brackets of the KINGGERI roof luggage rack crossbar are designed with integrated tie-down loops. These loops can accommodate ropes or straps up to 1/4" (6mm) wide, allowing for easy and secure fastening of cargo.

Image 5.1: Detail of the integrated tie-down loop.
5.3 Anti-Theft Feature
The cross bars are equipped with an anti-theft lock system. Always lock the cross bars when not in use or when carrying valuable cargo to prevent unauthorized removal.

Image 5.2: Anti-theft lock mechanism.
5.4 Aerodynamic Design
空気力学のプロfile of the cross bars is designed to effectively reduce wind resistance and noise, contributing to a quieter driving experience, especially at higher speeds.

Image 5.3: Cross bars with aerodynamic design carrying skis.
5.5 多用途
These cross bars are suitable for carrying various types of gear, including but not limited to:
- Kayak Racks
- Bicycle Stands
- Cargo Boxes
- Ski Frames

図5.4: 例amples of gear that can be carried with the cross bars.
6. メンテナンス
To ensure the longevity and optimal performance of your KINGGERI roof rack cross bars, follow these maintenance guidelines:
- 定期清掃: Clean the cross bars periodically with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish.
- ファスナーの検査: Before each use, especially after long trips or carrying heavy loads, inspect all screws and clamps to ensure they are tight and secure. Retighten if necessary.
- 損傷の確認: Regularly check the cross bars and brackets for any signs of wear, cracks, or damage. Replace any damaged components immediately.
- 潤滑: Periodically apply a small amount of lubricant to the lock mechanism to ensure smooth operation.
- ストレージ: If removing the cross bars for extended periods, store them in a dry, clean place away from direct sunlight and extreme temperatures.
7。 トラブルシューティング
7.1 過度の風切り音
- 原因: 不適切な取り付けまたはコンポーネントの緩み。
- 解決: すべてのclを確認してくださいamps and screws are tightened securely. Verify that the front and rear bars are installed in their correct positions (front bar is longer).
7.2 Cross Bars Feel Loose
- 原因: Screws or clamp十分に締め付けられていません。
- 解決: Re-tighten all screws and clamps using the provided Allen wrench until the bars are firm. Do not overtighten.
7.3 Difficulty Locking/Unlocking
- 原因: Debris in the lock mechanism or lack of lubrication.
- 解決: Clean the lock mechanism and apply a small amount of lubricant. Ensure the key is fully inserted and turned correctly.
8. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | KINGGERI |
| モデル番号 | KG2-7711 |
| 材料 | High-grade Aluminum (Brackets and Bars) |
| 耐荷重 | 260ポンド(118kg) |
| 製品寸法 | 41 x 4 x 6インチ(概算、梱包時) |
| アイテム重量 | 15ポンド |
| 色 | 黒 |
| 取り付けタイプ | Clamp Mount, Crossbar Mount, Rails, Roof Mount |
| 盗難防止機能 | Metal Mechanism Lock System |
| タイダウンループ | Integrated on all four brackets (accommodates up to 1/4" / 6mm rope) |

Image 8.1: Material and design comparison.
9. 保証とサポート
KINGGERI Roof Rack Cross Bars come with a 12ヶ月保証 ご購入日から有効です。この保証は、通常の使用における製造上の欠陥および材料の欠陥を対象としています。
If you encounter any concerns, questions, or require assistance with your product, please do not hesitate to contact KINGGERI customer support. Refer to your purchase documentation or the retailer's web具体的な連絡先情報については、サイトをご覧ください。
For more information about KINGGERI products, you may visit the official brand page on Amazon: KINGGERI Brand Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.