Vari Ergo 54x26 Electric Standing Desk User Manual

導入

This manual provides essential instructions for the assembly, operation, and maintenance of your Vari Ergo 54x26 Electric Standing Desk. Please read this manual thoroughly before use to ensure proper function and safety.

Image: The Vari Ergo 54x26 Electric Standing Desk, featuring a butcher block top and slate-colored legs, set up with dual monitors, keyboard, and mouse.

安全情報

Adhere to the following safety guidelines to prevent injury and damage to the product:

• Always ensure the desk is properly anchored to the floor if applicable, or placed on a stable, level surface.
• 最大重量を超えないでください 200ポンド（90.7kg）.
• Exercise caution when adjusting the height of the desk to avoid pinching or crushing hazards. Keep hands and objects clear of moving parts.
• 操作中は子供やペットをデスクから遠ざけてください。
• Ensure all cables are managed properly to prevent tripping hazards and damage during height adjustments.
• 電気部品をご自身で分解したり修理したりしないでください。資格のあるサービス担当者にご相談ください。

組み立て手順

The Vari Ergo Standing Desk features a quick, two-step assembly process designed for ease of installation. All necessary tools are included.

1. コンポーネントを解凍します: Carefully remove all parts from the packaging. The desk is shipped in two boxes. Ensure all components are present according to the packing list.
2. 脚を取り付ける: Position the desktop upside down on a soft, protected surface. Align the desk legs with the pre-drilled slots on the underside of the desktop. Secure the legs using the provided bolts and tools.
3. 足を取り付ける: Secure the feet to the bottom of the desk legs using the remaining bolts and tools.
4. コントロール パネルをインストールします。 Slide the control panel into its designated assembly slot. The control panel can be installed on either the right or left side by removing two screws, repositioning, and re-screwing into the pre-drilled holes.
5. ケーブル接続: Connect the motor cables to the power unit as instructed.
6. ポジションデスク: With assistance, carefully flip the desk upright and place it in its desired location.

Image: A diagram illustrating the dimensions of the Vari Ergo desk, including its 54-inch width, 26-inch depth, and 1.25-inch tabletop thickness, along with leg span measurements.

操作手順

Your Vari Ergo Electric Standing Desk allows for easy height adjustments and programmable memory settings.

高さ調整

• 使用 Up そして 下 arrow buttons on the control panel to smoothly raise or lower the desk to your desired height. The desk operates quietly.
• The height range is from 25インチから50.5インチ, accommodating various user heights.

メモリ設定

The desk features 4 programmable memory settings to save your preferred sitting and standing heights.

1. 上/下ボタンを使用して、デスクを希望の高さに調整します。
2. を押す 「M」 button (Memory) on the control panel. The display will flash.
3. 3秒以内に、番号付きプリセットボタンの1つを押します（1、2、3、または4) をクリックして、現在の高さをそのプリセットに保存します。
4. 保存した高さを呼び出すには、対応する番号のプリセットボタンを押すだけです。デスクは自動的に保存した位置に移動します。

Image: A visual representation of the Vari Ergo desk's height adjustment range, from its lowest point of 25 inches to its maximum height of 50.5 inches, highlighting the three-tier leg system.

特徴

• Ergonomic Curved Edge Design: The smooth, rounded waterfall front edge is designed to support better posture and reduce strain on forearms during extended use.
  

  Image: The Vari Ergo desk showcasing its curved, waterfall edge, designed for enhanced comfort and reduced wrist stress.

• Customizable Height Control: Electric lift mechanism with 4 programmable memory settings for seamless transitions between sitting and standing positions.
• Spacious & Sturdy Build: A 54-inch wide by 26-inch deep surface provides ample space for multiple monitors and accessories. The durable 1.25-inch thick laminate top supports up to 200 lbs (90.7 kg).
• Built-In Cable Management: Dual grommets are integrated into the desktop to help organize and conceal wires, maintaining a tidy workspace.
  

  画像: オーバーヘッド view of the Vari Ergo desk, highlighting the dual grommets for efficient cable management, keeping the workspace organized.

• クイック組み立て: Patented quick-attach system allows for assembly in minutes with minimal tools.

メンテナンス

To maintain the appearance and functionality of your Vari Ergo Electric Standing Desk:

• クリーニング： デスクトップと脚を広告で拭くamp 布。 仕上げを損傷する可能性がある研磨剤入りのクリーナーや刺激の強い化学薬品は避けてください。
• 検査： すべてのボルトと接続部がしっかりと固定されているか定期的に点検してください。必要に応じて締め直してください。
• ケーブル管理 Regularly inspect cables for wear or damage and ensure they are properly routed to prevent interference with desk movement.

トラブルシューティング

If you encounter issues with your Vari Ergo Electric Standing Desk, consider the following common solutions:

• 机が動かない:
  • 電源コードがデスクと壁のコンセントの両方にしっかりと差し込まれているかどうかを確認します。
  • すべてのモーター ケーブルがコントロール ボックスに正しく接続されていることを確認します。
  • 机に過度の荷重がかかっている場合は、重量を少し減らしてもう一度試してください。
• 不均一な動き:
  • 机が水平な場所に置かれていることを確認します。
  • Ensure no objects are obstructing the legs during movement.
• Memory Settings Not Working:
  • Re-program the memory settings following the "Operating Instructions" section.

If problems persist, please contact Vari customer support for assistance.

仕様

保証とサポート

Your Vari Ergo Electric Standing Desk is backed by a 限定生涯保証, covering parts and labor for the lifetime of the product.

For warranty claims, technical support, or any questions not addressed in this manual, please contact Vari customer service. Refer to the official Vari web現在の連絡先情報については、サイトをご覧ください。

オンラインリソース: For additional information and support, visit the official Vari webサイト： www.vari.com

重要な注意事項

This product may expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.