VOX The Real McCoy VRM-1 ワウギターエフェクトペダル 取扱説明書

製品終了view

The VOX The Real McCoy VRM-1 Wah Guitar Effects Pedal is a precise reissue of the iconic 1967 Vox Clyde McCoy wah pedal. It is engineered to meticulously replicate the exact tonal characteristics of the original, featuring an accentuated midrange for a warm and melodic character. This pedal is designed for guitarists seeking classic wah tones with reliable performance.

図1: 前面 view of the VOX The Real McCoy VRM-1 Wah Guitar Effects Pedal.

設定

1. 電源： The VRM-1 pedal operates on a 9V battery (sold separately). To install, remove the bottom plate of the pedal. Connect a fresh 9V battery to the battery clip inside the pedal. Ensure correct polarity.
2. 入力接続: Connect your guitar to the "INPUT" jack on the pedal using a standard 1/4-inch audio cable.
3. 出力接続: Connect the "OUTPUT" jack of the pedal to your amplifier or the next effect pedal in your signal chain using a standard 1/4-inch audio cable.
4. アクティベーション: The pedal is activated by pressing down on the treadle until you feel a click. The effect is engaged when the pedal is in the "wah" position.

図2：戻る view of the VOX VRM-1 Wah Pedal, showing input/output jacks and battery compartment access.

操作手順

The VRM-1 Wah Pedal is designed for intuitive operation, allowing for expressive tonal manipulation. The treadle controls the frequency sweep of the wah effect.

• Engaging the Wah Effect: To engage the wah effect, press the toe of the treadle down firmly until you hear a click. The pedal is now active.
• ワウスイープのコントロール: Move the treadle back and forth with your foot to sweep through the frequency range.
  • Moving the treadle towards the toe-down position (forward) emphasizes higher frequencies, creating a brighter, more "trebly" sound.
  • Moving the treadle towards the heel-down position (backward) emphasizes lower frequencies, resulting in a darker, more "bassy" sound.
• Disengaging the Wah Effect: To bypass the effect, press the toe of the treadle down firmly again until you hear a click. The pedal will return to bypass mode, and your guitar signal will pass through unaffected.

Figure 3: The VRM-1 Wah Pedal in an operational setup, demonstrating the treadle's movement.

メンテナンス

• バッテリー交換: When the sound becomes weak or distorted, it is time to replace the 9V battery. To replace, unscrew the four screws on the bottom plate, carefully remove the plate, disconnect the old battery, and connect a new 9V battery. Reattach the bottom plate securely.
• ケーブルの切断: For longest battery life, always unplug the instrument cable from the pedal's input jack when not in use. This disconnects the battery and prevents unnecessary drain.
• クリーニング： ペダルの外側を拭く際は、柔らかく乾いた布をご使用ください。研磨剤入りの洗剤や溶剤の使用は避けてください。
• ストレージ： ペダルは直射日光や極端な温度を避け、乾燥した涼しい場所に保管してください。

図4：内部 view of the VRM-1 Wah Pedal, showing the circuit board and battery clip location.

トラブルシューティング

仕様

• モデル： VRM1
• ブランド： ヴォックス
• 商品の重量: 3.3 ポンド (1.5 キログラム)
• 製品寸法: 長さ9.92インチ x 幅3.15インチ x 高さ4.02インチ (4.02 x 9.92 x 3.15インチ)
• 本体材質: 金属
• 色： 黒
• 電源: 9V Battery (1 x 9V battery required)
• コネクタタイプ: 1/4インチオーディオ
• 信号フォーマット： アナログ

公式製品ビデオ

There are no official seller videos specifically for the VOX The Real McCoy VRM-1 Wah Guitar Effects Pedal available in the provided data. For additional product demonstrations or information, please refer to the manufacturer's official webサイトまたは正規販売店。

保証とサポート

Specific warranty details and customer support contact information for the VOX The Real McCoy VRM-1 Wah Guitar Effects Pedal are typically provided in the full product manual included with your purchase or can be found on the official VOX Amp化 website. Please refer to these resources for comprehensive warranty coverage and support options.