Nerf Pro Sender Half-Length Semi-Automatic Dart Blaster Instruction Manual

導入

The Nerf Pro Sender is a high-performance, semi-automatic dart blaster designed for competitive play. It utilizes half-length darts for enhanced accuracy, distance, and velocity, reaching speeds up to 150 feet per second. This manual provides essential information for safe setup, operation, and maintenance of your blaster.

安全情報

警告：小さな部品が飛び散る場合があります。3歳未満のお子様には適していません。

This product is recommended for ages 14 and up. Always use the included eyewear to protect your eyes. Do not aim at eyes or face. Use only official Nerf Pro darts. Do not modify darts or blaster. Impact from darts may cause temporary marks on skin. Read instructions before use for important safety information.

Image: A person holding the Nerf Pro Sender blaster while wearing protective eyewear, emphasizing safety during use.

箱の中身

• Nerf Pro Sender Blaster
• 15-Dart Magazine
• 30 Nerf Pro Half-Length Darts
• アイウェア
• 説明書（このマニュアル）

Image: The Nerf Pro Sender blaster and its included accessories (magazine, darts, eyewear) displayed within its product packaging.

設定

1. バッテリーの取り付け

The Nerf Pro Sender blaster requires 8x 1.5V AA alkaline batteries (not included).

1. Locate the battery compartment on the underside of the blaster, near the magazine well.
2. 電池コンパートメント カバーのネジを外します。
3. 正しい極性 (+/-) を確認して、単三電池 8 本を挿入します。
4. 電池カバーを取り付けて、ネジで固定します。

2. Magazine Loading

The blaster comes with a 15-dart capacity magazine.

1. Insert Nerf Pro half-length darts into the magazine, ensuring they are properly seated.
2. Align the loaded magazine with the magazine well on the blaster.
3. Push the magazine firmly into the well until it clicks into place.

Image: A hand demonstrating how to insert the 15-dart magazine into the Nerf Pro Sender blaster.

3. Eyewear

Always wear the included protective eyewear when operating the blaster.

操作手順

1. Powering On and Revving

To activate the blaster's motor, press and hold the rev trigger located below the main trigger. You will hear the motor spin up.

Image: A close-up of a hand pressing the rev trigger on the Nerf Pro Sender blaster, indicating the power-up action.

2. ダーツを発射する

While holding the rev trigger, pull the main firing trigger to launch a dart. The blaster features semi-automatic firing, meaning one dart is fired per trigger pull while the rev trigger is held.

Image: Two people demonstrating the firing of the Nerf Pro Sender blasters, showing darts in flight and the use of protective eyewear.

3.トリガーロック

The blaster is equipped with a trigger lock for safety. Engage the trigger lock when the blaster is not in use to prevent accidental firing.

4. Magazine Removal

To remove the magazine, press the magazine release button, typically located near the magazine well, and pull the magazine downwards.

Video: A short official product video demonstrating the Nerf Pro Sender blaster, including magazine insertion, revving, and firing actions.

メンテナンス

ダーツケア

• Store darts properly to prevent bending or damage, which can affect performance and cause jams.
• Do not use damaged or modified darts.

画像: クローズアップ view of several Nerf Pro half-length darts, illustrating their design for accuracy and velocity.

ブラスタークリーニング

• ブラスターを乾いた布か軽く湿らせた布で拭いてください。amp 布でホコリやゴミを取り除きます。
• Ensure no moisture enters the battery compartment or internal mechanisms.

バッテリーストレージ

• Remove batteries from the blaster when not in use for extended periods to prevent leakage.

トラブルシューティング

ブラスターが発射されない

• 電池が正しく取り付けられ、十分に充電されていることを確認してください。必要に応じて交換してください。
• Ensure the rev trigger is fully pressed before pulling the firing trigger.
• Verify the magazine is fully inserted and locked into place.
• Check if the trigger lock is disengaged.

Darts Not Firing Properly / Jams

• Ensure only official Nerf Pro half-length darts are used.
• Check darts for damage (bends, tears) and replace any compromised darts.
• Ensure darts are loaded correctly into the magazine without being squished.
• Inspect the dart path for any obstructions.

仕様

保証とサポート

保証情報およびカスタマーサポートについては、メーカーの公式ウェブサイトをご覧ください。 web購入サイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。購入証明書としてレシートを保管してください。