RunCam Spotter V2 FPV Camera and Transmitter Kit User Manual

導入

The RunCam Spotter V2 Micro FPV AIO Camera is a compact, all-in-one camera and video transmitter designed for various RC applications, including RC cars, boats, drones, and planes. It features a 700TVL camera with a 170-degree field of view, an integrated microphone, and an On-Screen Display (OSD) for real-time data. The 5.8G video transmitter offers adjustable power output from 20mW to 200mW across 40 channels, ensuring compatibility with standard FPV goggles and monitors.

パッケージ内容

1x Spotter V2 Micro FPV AIO Camera (with Cloverleaf antenna)
1x XT-60 Power Cable
1x Double Sided Tape (one side Velcro)
1x Spare Whip Antenna
ユーザーマニュアル (本書) x 1

製品終了view

The Spotter V2 is designed for minimal impact on device performance due to its lightweight and compact form factor. It provides an expansive field of view for an immersive FPV experience.

RunCam Spotter V2 FPV Camera held between two fingers, with a US quarter coin below it for scale, illustrating its compact size.

Image: The RunCam Spotter V2 FPV Camera, demonstrating its compact size and lightweight design, weighing only 9g.

RunCam Spotter V2 FPV Camera with a wide-angle view overlayed on a cityscape, showing a 170-degree field of view.

Image: Illustration of the 170-degree wide-angle lens, providing an expansive field of view for enhanced detail in FPV applications.

Diagram showing the dimensions of the RunCam Spotter V2 FPV Camera, including length, width, height, and cable length.

Image: Detailed dimensions of the Spotter V2 camera, measuring 35x20.5x17.8mm (excluding antenna).

設定

電源接続: Connect the provided XT-60 power cable to the camera and your power source (2S-4S LiPo battery, 7.4V-14.8V). Ensure correct polarity.
アンテナの設置： The camera comes with a pre-installed Cloverleaf antenna. A spare Whip Antenna is included for replacement if needed. Ensure the antenna is securely attached.
取り付け: Use the double-sided tape (one side Velcro) to securely mount the camera on your RC vehicle. Position the camera to achieve the desired field of view.
冷却： Due to potential heat generation, especially in enclosed spaces, ensure adequate airflow around the camera's heatsink. Consider adding a small cooling fan if mounting inside an RC vehicle without natural ventilation.
FPV Receiver Connection: The Spotter V2 is compatible with all analog 5.8G FPV goggles and monitors. Refer to your FPV receiver's manual for pairing instructions.

RunCam Spotter V2 FPV Camera shown with FPV goggles and a monitor, illustrating broad compatibility with various FPV receiving devices.

Image: The Spotter V2 camera is broadly compatible with analog FPV goggles and monitors.

操作手順

電源オン: Connect the camera to a compatible power source. The camera will power on automatically.
Channel and Band Selection: The camera features 5 bands and 40 channels. Use the button on the camera to cycle through channels and bands. Refer to the detailed frequency table (usually provided in a separate quick start guide or on the product page) to match your FPV receiver.
オンスクリーンディスプレイ (OSD): The integrated OSD provides real-time flight data, such as battery voltage and channel information. This data is overlaid on the video feed.
統合マイク： The built-in microphone captures audio, enhancing the immersive FPV experience.
ビデオ伝送： Once powered on and a channel is selected, the camera will transmit video. Ensure your FPV goggles or monitor are tuned to the same frequency.

RunCam Spotter V2 FPV Camera with its heatsink and a 'PRESS' button visible, indicating adjustable power and multi-mode capabilities.

Image: The camera's button for frequency adjustment and its heatsink for thermal management.

メンテナンス

クリーニング： Keep the camera lens clean using a soft, dry cloth. Avoid abrasive materials or harsh chemicals.
熱管理: Regularly inspect the heatsink for dust or debris. Ensure consistent airflow to prevent overheating, which can degrade video quality and shorten component lifespan.
アンテナのケア: Handle the antenna carefully. If the Cloverleaf antenna is damaged, it can be replaced with the spare Whip Antenna by soldering.
ストレージ： Store the camera in a dry, cool environment away from direct sunlight and extreme temperatures.

トラブルシューティング

問題	考えられる原因	解決
Distorted or No Video Signal	Incorrect channel/band selection on receiver. Overheating of the camera/transmitter. Damaged antenna or poor connection. 電力供給が不十分です。	Verify receiver and transmitter are on the same frequency. Ensure adequate cooling and airflow around the camera. Check antenna for damage and secure connection. Replace if necessary. Confirm power source provides sufficient voltage (7.4V-14.8V)。
Camera Gets Excessively Hot	Lack of airflow around the heatsink. Operating in an enclosed space.	Improve ventilation around the camera. Consider installing a small cooling fan if operating in confined areas.
音声なし	Receiver not configured for audio. マイクの問題。	Check your FPV receiver settings for audio input. Contact support if the issue persists after checking receiver settings.

仕様

特徴	詳細
カメラ	700 TVL, 170-degree wide-angle lens
解決	1280*960
ビデオ出力解像度	720ピクセル
Default Video Input	パル
ビデオ伝送	5.8G, 40CH, 20mW~200mW adjustable
最大伝送距離	500 meters / 547 yards
入力電力	2S-4S (7.4V~14.8V)
アンテナ	Cloverleaf and Whip antenna (interchangeable)
周波数調整	ボタンを押す
特徴	Built-in OSD, Integrated Microphone
最小照度	0.5 ルクス
動作電流	80mA
寸法（長さ×幅×高さ）	35×20.5×17.8mm（アンテナ含まず）
総重量	9g
材料	プラスチック
スキルレベル	初心者

保証

The RunCam Spotter V2 FPV Camera and Transmitter Kit typically comes with a 1-year limited warranty. For specific warranty terms, conditions, and claim procedures, please refer to the official RunCam web公式サイトをご覧いただくか、カスタマーサポートに直接お問い合わせください。保証の有効性を確認するため、購入証明書を保管してください。

サポート

For further assistance, technical support, or inquiries regarding the RunCam Spotter V2, please visit the official RunCam website or contact their customer service department. Online resources, FAQs, and firmware updates may also be available on their webサイト。

Official RunCam Store: Visit the RunCam Store on Amazon