1. はじめに
This manual provides detailed instructions for the safe and effective use of your KUIDAMOS Pneumatic Vacuum Regulator. This device is designed to precisely control vacuum pressure in various industrial and scientific applications. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of the product.
Image 1.1: The KUIDAMOS Pneumatic Vacuum Regulator with its integrated pressure dial.
2 製品の特徴
- Self-Locking Pressure Regulating Design: Allows for easy and secure pressure setting in three simple steps.
- Wide Operating Pressure Range: Capable of regulating pressure from -100 to -1.3 Kpa.
- Clear Dial Design: Features an easy-to-read dial for accurate pressure monitoring and adjustment.
- 多用途アプリケーション: Suitable for use in compressed air equipment and pipelines, including air compressors, air receivers, dryers, and air compression pipelines.
- コンパクトサイズ: Designed for portability and ease of use in various setups.
3. パッケージ内容
パッケージを開封したら、すべてのアイテムが揃っていて損傷がないことを確認してください。
- 1 x Air Pressure Regulator
- 1 x Pressure Dial
- スタンド x 1
Image 3.1: Included components: regulator, pressure dial, and mounting bracket.
4. セットアップ手順
Follow these steps to properly set up your pneumatic vacuum regulator:
- レギュレータの取り付け: Secure the regulator using the provided stand. Ensure it is mounted in a stable position, preferably vertically, to allow for clear reading of the pressure dial.
- Attaching the Pressure Dial: Carefully screw the pressure dial into the designated port on the regulator. Hand-tighten only to avoid damage.
- Connecting to the Pneumatic System: Connect the regulator to your compressed air equipment or pipeline using appropriate fittings for the RC 1/8 inch interface thread. Ensure all connections are sealed properly to prevent leaks.
Image 4.1: Key components for assembly, including the pressure setting handwheel and core assembly.
Image 4.2: Internal structure diagram for understanding component placement.
5. 操作手順
The KUIDAMOS Pneumatic Vacuum Regulator features a self-locking design for precise and stable pressure adjustment:
- ロック解除: Gently lift the adjustment knob (handwheel) upwards to unlock the pressure setting mechanism.
- 調整： Rotate the knob clockwise to increase vacuum pressure or counter-clockwise to decrease it. Observe the pressure dial for real-time readings.
- ロック： Once the desired pressure is reached, press the knob downwards to lock the setting. This prevents accidental changes to the pressure.
The operating pressure range for this regulator is -100 to -1.3 Kpa. Ensure your application's requirements fall within this range.
Image 5.1: Visual guide for the three-step pressure adjustment process.
Image 5.2: The regulator's pressure dial for monitoring current vacuum levels.
6. メンテナンス
Regular maintenance ensures the longevity and reliable performance of your regulator:
- 検査： Periodically inspect the regulator and all connections for any signs of wear, damage, or leaks. Address any issues promptly.
- クリーニング： Keep the exterior of the regulator clean. Use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface or markings.
- 接続チェック: Ensure all pneumatic connections remain tight and secure. Loose connections can lead to pressure loss or inaccurate readings.
7。 トラブルシューティング
If you encounter issues with your pneumatic vacuum regulator, refer to the following common problems and solutions:
- Difficulty Connecting Hoses: Ensure the hose diameter and thread type match the regulator's RC 1/8 inch interface. Incorrect sizing is a common cause of connection issues. Consult a professional if unsure about compatible fittings.
- No Pressure or Unstable Pressure:
- Check for leaks in the system, especially at connection points.
- Verify that the air supply is adequate and consistent.
- Ensure the adjustment knob is properly unlocked before attempting to change pressure, and locked afterward.
- 不正確な圧力測定:
- Confirm the pressure dial is securely attached and not damaged.
- Compare the reading with another calibrated gauge if possible to verify accuracy.
8. 仕様
| 仕様 | 価値 |
|---|---|
| 動作圧力範囲 | -100 to -1.3 Kpa |
| Interface Thread | RC 1/8 inch |
| パッケージ寸法 | 6.93 x 4.72 x 1.97インチ |
| アイテム重量 | 8.5オンス |
| モデル番号 | Pneumatic Vacuum Regulator |
| メーカー | KUIDAMOS |
Image 8.1: The regulator is suitable for a wide range of pneumatic applications.
Image 8.2: Application fields for the pneumatic vacuum regulator.
9. 保証とサポート
For warranty information, technical support, or any inquiries regarding your KUIDAMOS Pneumatic Vacuum Regulator, please contact KUIDAMOS customer service directly. Refer to the product packaging or the official KUIDAMOS web連絡先の詳細についてはサイト。