導入
This manual provides detailed instructions for the installation, operation, and maintenance of your CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller. Please read this manual thoroughly before use to ensure proper functionality and safety.
安全情報
- 電源のボリュームを確認してくださいtage (DC12V-24V) matches the controller's requirements to prevent damage.
- コントローラーを湿気や極端な温度にさらさないでください。
- 接続やメンテナンスを行う前に、電源を切ってください。
- このデバイスは屋内専用に設計されています。
- お子様の手の届かない場所に保管してください。
パッケージ内容
パッケージには、次のアイテムが含まれている必要があります。
- 1 x CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller (Model: Tuya-mini-WIFI)
Note: LED light strips and power supply are sold separately.
製品終了view
The CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller allows you to control your RGB LED light strips wirelessly via the Tuya Smart Life APP.
図1: フロント view of the CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller, showing the main control unit, the DC input cable, and the 4-pin output connector for RGB LED strips. A separate 4-pin male header is also visible, likely for connecting to the LED strip.
図2: 後方 view of the CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller, illustrating the DC power input jack and the DC power output plug, along with the main control unit.
主な特徴:
- WiFi 2.4GHz connectivity for smart control.
- Compatible with Tuya Smart Life APP.
- Supports DC12V-24V input voltage.
- Designed for RGB LED light strips.
- Compact mini design.
仕様
| 製品名 | WiFi Mini Strip Controller |
| モデル | Tuya-mini-WIFI |
| 巻tage | DC12V-24V |
| DC Diameter | 5.5×2.5ミリ |
| 出力 | Max. 0-2A/channel |
| 制御信号 | Wi-Fi 2.4GHz |
| 寸法（長さ×幅×高さ） | 64*24*12ミリメートル |
| 動作温度 | -20°C ～ 60°C |
| Supported LED Types | RGB (also supports RGBW, RGBCCT variants) |
設定
1. 配線接続
- LEDストリップを接続します: Connect your RGB LED light strip to the 4-pin output connector of the controller. Ensure the polarity (R, G, B, V+) matches correctly.
- 電源の接続： Connect a compatible DC12V-24V power supply (not included) to the DC input jack of the controller.
- 電源オン: Plug the power supply into a wall outlet. The LED strip should briefly light up, indicating power.
重要： Always ensure the power supply is disconnected before making or changing any wiring connections.
2.アプリのインストール
- アプリをダウンロードする： 検索する "Tuya Smart" or "Smart Life" in your mobile device's app store (App Store for iOS, Google Play Store for Android) and download the application.
- 登録/ログイン: アプリを開いて、新しいアカウントを登録するか、既存のアカウントでログインします。
3.デバイスのペアリング
- ペアリングモードに入る： With the controller powered on, press and hold the button on the controller for approximately 5-10 seconds until the LED strip starts flashing rapidly. This indicates the controller is in pairing mode.
- アプリでデバイスを追加: Open the Tuya Smart/Smart Life app. Tap the "+" icon in the top right corner to add a device.
- デバイスタイプを選択: Choose "Lighting" or "Light Source (Wi-Fi)" from the device list.
- Wi-Fiに接続します: Confirm that the LED strip is flashing rapidly. Enter your 2.4GHz Wi-Fi network name and password. (Note: 5GHz Wi-Fi networks are not supported.)
- ペアリング: The app will begin searching for the device. Once found, the LED strip will stop flashing and remain steadily lit.
- デバイスの名前を変更します: After successful pairing, you can rename the controller for easier identification (e.g., "Living Room LED Strip").
操作手順
1. Using the Tuya Smart / Smart Life App
Once the controller is paired with the app, you can access various control functions:
- 色の選択: Choose from a wide spectrum of colors using the color wheel or predefined color palettes.
- 明るさ調整: Adjust the intensity of the light from 0% to 100%.
- シーンモード: Select from various dynamic scene modes (e.g., Party, Reading, Relax) or create custom scenes.
- タイマー/スケジュール: Set schedules for the LED strip to turn on/off or change modes at specific times.
- グループコントロール： If you have multiple Tuya-compatible devices, you can group them for simultaneous control.
- 音声コントロール: Integrate with voice assistants like Amazon Alexa or Google Assistant for hands-free control (requires additional setup within the app).
2. Manual Control (Button on Controller)
The physical button on the controller provides basic control:
- シングルプレス： Toggles the LED strip On/Off.
- 長押し（5～10秒）: Enters pairing mode (LED strip flashes rapidly).
メンテナンス
- コントローラーは清潔に保ち、ほこりを取り除いてください。清掃には乾いた柔らかい布を使用してください。
- 過酷な化学薬品や研磨剤入りのクリーナーは使用しないでください。
- 過熱を防ぐために、コントローラーの周囲に適切な換気を確保してください。
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| LEDストリップが点灯しません。 | No power; incorrect wiring; faulty LED strip. | Check power supply connection and outlet. Verify LED strip wiring polarity. Test with a different LED strip if possible. |
| Cannot pair with Tuya Smart / Smart Life app. | Controller not in pairing mode; incorrect Wi-Fi password; 5GHz Wi-Fi network; weak Wi-Fi signal. | Ensure LED strip is flashing rapidly. Double-check Wi-Fi password. Connect to a 2.4GHz Wi-Fi network. Move controller closer to the Wi-Fi router. |
| アプリコントロールが応答しません。 | Poor Wi-Fi connection; app glitch. | Check Wi-Fi signal strength. Restart the app. Power cycle the controller (unplug and replug). |
| LED strip colors are incorrect. | Incorrect wiring polarity (R, G, B channels swapped). | Disconnect power and re-check the 4-pin connection between the controller and the LED strip, ensuring R, G, B, V+ align correctly. |
保証とサポート
保証情報や技術サポートについては、販売店またはメーカーの公式ウェブサイトをご覧ください。 website where the product was purchased. Please have your purchase receipt and product model number (Tuya-mini-WIFI) available when contacting support.