1. はじめに
The RunCam Spotter V2 Micro FPV AIO Camera is an integrated camera and video transmitter (VTX) system designed for First Person View (FPV) applications in various remote-controlled vehicles such as RC cars, planes, boats, and drones. This compact unit provides a 700TVL camera with a 170-degree field of view, a 5.8GHz 40-channel adjustable power VTX (20mW-200mW), an integrated microphone, and an On-Screen Display (OSD) for real-time data.
This manual provides essential information for the proper setup, operation, and maintenance of your Spotter V2 FPV Camera and Transmitter Kit.
2. パッケージ内容
以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。
- 1x Spotter V2 Micro FPV AIO Camera (with Cloverleaf antenna)
- 1x XT-60 Power Cable
- 1x Double Sided Tape (one side is Velcro)
- 1x Spare Whip Antenna
- ユーザーマニュアル (本書) x 1
3. 仕様
| 特徴 | 仕様 |
|---|---|
| カメラ解像度 | 700TVL |
| 分野 View （FOV） | 170度 |
| ビデオ解像度 | 1280*960 |
| 内蔵マイク | はい |
| Video Transmission Frequency | 5.8GHz帯 |
| チャンネル | 40 チャンネル |
| 送信電力 | 20mW ~ 200mW (Adjustable) |
| 最大伝送距離 | 500 meters / 547 yards |
| Default Video Input | パル |
| 入力電力 | 2S-4S (7.4V ~ 14.8V) |
| アンテナタイプ | Cloverleaf (default), Whip (spare) |
| 内蔵OSD | はい |
| 最小照度 | 0.5 ルクス |
| 動作電流 | 80mA |
| 寸法（長さ×幅×高さ） | 35mm x 20.5mm x 17.8mm (Antenna not included) |
| 総重量 | 9g |
| 互換性 | RC cars, aircraft, boats, drones; compatible with analog FPV goggles and monitors. |
Image: Dimensions of the RunCam Spotter V2 FPV Camera, showing length, width, and height measurements in millimeters.
Image: Illustration of the 170-degree wide-angle lens of the Spotter V2 camera, demonstrating its expansive field of view over a landscape.
4. セットアップ
4.1カメラの取り付け
The Spotter V2 camera is designed to be compact and lightweight, making it suitable for various RC vehicles. Use the provided double-sided tape (Velcro on one side) to securely mount the camera to your RC car, plane, boat, or drone. Ensure the camera has a clear line of sight for optimal FPV experience.
Image: A hand holding the compact RunCam Spotter V2 FPV camera, demonstrating its small size relative to a US quarter coin.
Image: The Spotter V2 FPV camera mounted on top of an RC car, demonstrating a typical installation scenario.
4.2電源接続
Connect the provided XT-60 power cable to the camera's power input. The camera supports a 2S-4S LiPo battery (7.4V-14.8V). Ensure correct polarity when connecting the power source to avoid damage to the unit.
The camera's wiring typically consists of:
- 赤いワイヤー: Positive (+) power input
- 黒ワイヤー: Negative (-) power input (Ground)
- 黄色のワイヤー： Video Out (if applicable, though this is AIO, so video is transmitted wirelessly)
For direct power, connect the red and black wires to your vehicle's battery or a suitable power distribution board within the specified voltage範囲。
4.3 アンテナの設置
The Spotter V2 comes with a pre-installed Cloverleaf antenna. A spare Whip antenna is also included. If the Cloverleaf antenna becomes damaged, you can solder the Whip antenna in its place. Ensure the antenna is securely attached and positioned to minimize obstruction for best signal transmission.
5. 操作手順
5.1 電源投入と初期チェック
Once the camera is mounted and powered correctly, connect your FPV goggles or monitor. The camera will power on automatically with your vehicle's power system. You should see the FPV feed on your display device.
Image: The Spotter V2 FPV camera positioned next to an FPV monitor, illustrating the live video feed capability.
Image: The Spotter V2 FPV camera shown with an FPV monitor and goggles, highlighting its broad compatibility with analog FPV receiving equipment.
5.2 Channel and Power Adjustment
The Spotter V2 features a button for frequency adjustment. Refer to the markings on the camera unit for the exact location of the "PRESS" button. Short presses typically cycle through channels, while long presses may cycle through bands or power levels. Consult the on-screen display (OSD) for current channel, band, and power settings.
- ショートプレス: Change channel within the current band.
- 長押し： Change band or adjust VTX power (20mW, 200mW).
Ensure your FPV receiver (goggles/monitor) is set to the same band and channel as the Spotter V2 for a clear video feed.
Image: The Spotter V2 FPV camera with its antenna, depicted with signal waves, representing its multi-mode capabilities including adjustable power and multiple channels.
5.3 オンスクリーンディスプレイ（OSD）
The integrated OSD provides real-time information directly on your FPV feed. This may include battery voltage, current channel/band, and other critical flight data. This feature helps in monitoring the system status during operation.
5.4 内蔵マイク
The Spotter V2 includes an integrated microphone, allowing you to hear ambient sounds from your RC vehicle. This enhances the immersive FPV experience. Ensure your FPV receiver supports audio reception.
6. メンテナンス
- クリーニング： Keep the camera lens clean using a soft, dry cloth. Avoid abrasive materials or harsh chemicals.
- アンテナのケア: Ensure the antenna is not bent or damaged. A damaged antenna can significantly reduce transmission range and video quality. Use the spare whip antenna if the primary antenna is compromised.
- ストレージ： カメラは直射日光や極端な温度を避け、乾燥した涼しい場所に保管してください。
- 力： Always disconnect power when not in use to prevent battery drain and potential damage.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| No video signal on FPV display. |
|
|
| Poor video quality (static, lines, weak signal). |
|
|
| No audio from integrated microphone. |
|
|
8. 保証とサポート
The RunCam Spotter V2 FPV Camera and Transmitter Kit comes with a standard manufacturer's warranty. For specific warranty details and duration, please refer to the documentation provided at the time of purchase or contact RunCam customer support directly.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please visit the official RunCam web購入サイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。購入証明書としてレシートを保管してください。
メーカー: RunCam
Webサイト： www.runcam.com (This is a placeholder link, please verify the official webサポートについてはサイトをご覧ください。