Lexicon Dade Queen Platform Bed (Model 1492GY-1) Instruction Manual

1.製品オーバーview

The Lexicon Dade Queen Platform Bed is designed to offer a modern and versatile sleeping solution. This platform bed features a gray velvet fabric upholstered headboard with vertical channel-tufting, complemented by a brushed gray finish on the engineered wood frame, footboard, and rails. Its platform construction eliminates the need for a box spring.

Image 1.1: The Lexicon Dade Queen Platform Bed in a contemporary bedroom setting, showcasing its gray velvet headboard and wood frame.

2. 安全情報

Please read and understand all instructions before beginning assembly. Failure to follow these instructions may result in injury or damage to the product. Keep all small parts and packaging materials away from children. Assembly should be performed by at least two adults. Do not use power tools for assembly unless specifically instructed, as overtightening fasteners can cause damage. Ensure all connections are secure before use. Do not exceed the recommended weight capacity for the bed frame.

3. パッケージ内容

組み立てを始める前に、下記のすべての部品が揃っていることを確認してください。部品が不足または破損している場合は、カスタマーサポートまでご連絡ください。

• ヘッドボード (1)
• フットボード (1)
• サイドレール (2)
• Support Slats (Multiple)
• Center Support Legs (Multiple)
• Hardware Pack (Bolts, Washers, Allen Wrench, etc.)

4. 組み立て手順

正しく組み立てるために、以下の手順を慎重に実行してください。ベッドは実際に使用する部屋で組み立てることをお勧めします。

1. 開梱して部品を識別する: すべての部品をパッケージから慎重に取り出します。傷がつかないように、柔らかく清潔な表面に置いてください。付属のパーツリストを使用して各部品を確認してください。
2. サイドレールをヘッドボードに取り付けます。 Align the side rails with the pre-drilled holes on the headboard. Secure them using the appropriate bolts and washers from the hardware pack. Do not fully tighten bolts until all major components are connected.
3. サイドレールをフットボードに取り付ける: Connect the other end of the side rails to the footboard, aligning holes and securing with bolts and washers. Once all four corners are connected, gently tighten all bolts using the provided Allen wrench.


画像4.1: 側面 view of the bed frame, illustrating the connection points between the side rails, headboard, and footboard.

4. センターサポート脚を取り付けます。 Attach the center support legs to the designated crossbeams or support points on the side rails. Ensure they are firmly attached and provide stable support.
5. Place Support Slats: Lay the wooden support slats across the bed frame, ensuring they are evenly spaced and secured to the side rails using the provided fasteners (if applicable). The slats provide the necessary support for your mattress.


画像4.2: 角度付き view of the bed frame with the wooden support slats properly installed, ready for a mattress.

6. 最終締め付け: Double-check all bolts and fasteners to ensure they are fully tightened. Do not overtighten.

5. 使用方法

This platform bed is designed to be used without a box spring. Simply place your queen-sized mattress directly onto the support slats. Ensure the mattress is centered and evenly distributed on the frame. Avoid jumping on the bed or placing excessive localized weight on any single point of the frame or slats.

6. メンテナンス

• ベルベットの布張りのクリーニング： ベルベット生地の一般的なお手入れは、布張り用アタッチメントを使って掃除機で優しく掃除してください。こぼれた場合は、すぐに清潔で乾いた布で拭き取ってください。頑固な汚れは、専門の布張りクリーナーにご相談ください。刺激の強い化学薬品は使用しないでください。
• Cleaning Wood Frame: 木製フレームを柔らかくて乾いた布で拭きますamp cloth. Avoid abrasive cleaners or polishes that may damage the finish. Dry immediately with a clean cloth.
• ハードウェアチェック: Periodically check all bolts and fasteners to ensure they remain tight. Retighten as necessary to maintain stability and prevent squeaking.
• 直射日光を避けてください: Prolonged exposure to direct sunlight can cause fading of the velvet fabric and wood finish.

Image 6.1: Close-up detail of the gray velvet fabric and the brushed gray wood finish, illustrating the textures for cleaning reference.

7。 トラブルシューティング

• きしみ音: If the bed squeaks, check all bolts and connections. Tighten any loose hardware. Ensure the center support legs are firmly on the floor and evenly supporting the frame.
• 不安定なフレーム: If the bed feels wobbly, verify that all components are correctly assembled and all fasteners are securely tightened. Ensure the bed is on a level surface.
• 損傷した部品: If any part is damaged during assembly or use, discontinue use and contact customer support for replacement parts.

8. 仕様

Image 8.1: Dimensional diagram of the Lexicon Dade Queen Platform Bed.

9. 保証とサポート

For warranty information and customer support, please refer to the product description on the store page or contact Lexicon customer service directly. You can visit the official Lexicon store for more details: Lexicon Store.