JTLB JTLBg9c2o38k0n

JTLB Universal Projector Remote Control User Manual

Model: JTLBg9c2o38k0n

1. はじめに

This manual provides instructions for the JTLB Universal Projector Remote Control, model JTLBg9c2o38k0n. This device is designed to provide convenient control over various projector functions. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your remote control.

The remote control is constructed from durable ABS material, ensuring portability and longevity. It operates wirelessly, offering a control distance of up to 10 meters, though actual range may vary depending on the specific projector model and environmental factors. It requires two AAA batteries for operation, which are not included.

2. セットアップ

2.1 バッテリーの取り付け

  1. リモコンの背面にある電池ボックスのカバーを見つけます。
  2. カバーを下方向または矢印の方向にゆっくりとスライドさせて開きます。
  3. 単4電池2本をコンパートメントに挿入し、プラス(+)とマイナス(-)の端子がコンパートメント内のマークと正しく揃っていることを確認します。
  4. 電池ボックスのカバーを、カチッと音がするまで元の位置に戻してしっかりと閉めます。
Image showing the open battery compartment of the JTLB Universal Projector Remote Control, with two AAA battery slots visible.

Figure 1: Battery Compartment. Insert two AAA batteries, observing polarity.

2.2最初の使用

After battery installation, the remote control is ready for use. No complex pairing or configuration is typically required for universal projector remotes, as they often operate using standard infrared (IR) signals. Point the remote directly at your projector's IR receiver for optimal performance.

3. 操作手順

The JTLB Universal Projector Remote Control features a range of buttons for various projector functions. Familiarize yourself with the layout and functions below:

トップダウン view of the JTLB Universal Projector Remote Control, showing all buttons clearly labeled.

Figure 2: Remote Control Layout. All buttons are clearly visible.

  • オン/オフ: Power button to turn the projector on or off.
  • VIDEO/RGB/SOURCE: Select input sources (e.g., HDMI, VGA, Video).
  • AV/MUTE: Mute audio or switch to AV input.
  • VOL +/-: 音量レベルを調整します。
  • KEYSTONE +/-: Adjust keystone correction for image distortion.
  • ZOOM +/-: Zoom in or out on the projected image.
  • メニュー/ESC: Access the projector's menu or exit current menu.
  • Navigation (Up, Down, Left, Right) & ENTER: メニューを移動して選択内容を確認します。
  • POINTER: Activate or deactivate a digital pointer function (if supported by projector).
  • ミュート: オーディオ出力をミュートします。
  • BRIGHT/CONTRAST/COLOR: Adjust image brightness, contrast, and color settings.
  • ASPECT/MODE/FREEZE/AUTO: Control aspect ratio, display modes, freeze frame, and auto-adjust functions.
  • SIZE +/- / PAGE +/-: Adjust image size or navigate pages in presentations.
  • セット: Potentially for advanced settings or programming (refer to your projector's manual).

Note: Not all functions may be supported by every projector model. Refer to your specific projector's user manual for compatibility and detailed function descriptions.

4. メンテナンス

4.1 電池の交換

Replace batteries when the remote's response becomes sluggish or stops working. Always replace both AAA batteries simultaneously with new ones. Do not mix old and new batteries, or different types of batteries.

4.2 クリーニング

リモコンは柔らかく乾いた布で拭いてください。頑固な汚れには、軽く湿らせた布で拭いてください。amp cloth can be used, followed by immediate drying. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the remote's surface or internal components.

4.3 ストレージ

When not in use for extended periods, it is recommended to remove the batteries to prevent leakage and potential damage to the remote control. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

5。 トラブルシューティング

  • リモコンが応答しない:
    • 電池が正しい極性で正しく挿入されているかどうかを確認してください。
    • 古い電池を新しい単4電池と交換してください。
    • リモコンとプロジェクターの IR 受信機の間に障害物がないことを確認してください。
    • Confirm you are within the effective operating range (up to 10 meters).
  • 特定のボタンは機能しません:
    • Some functions may not be supported by your specific projector model. Refer to your projector's manual.
    • Clean the remote control to ensure no debris is obstructing button presses.
  • 短い動作範囲:
    • 電池を交換してください。
    • Ensure a clear line of sight to the projector.
    • Environmental factors or strong light sources can interfere with IR signals.

6. 仕様

特徴仕様
ブランドJTLB
モデル番号JTLBg9c2o38k0n
材料アブソリュート
寸法約15.6 x 4.5 x 2 cm(6.14 x 1.77 x 0.79インチ)
リモコン距離Up to 10 meters (actual distance depends on projector model)
電池のタイプ単2電池XNUMX本(別売)
電源DC3V
重さ約52g(電池なし)
互換性Compatible with models described on the back of the remote control (general universal compatibility for projectors)

7. 保証とサポート

Information regarding specific warranty terms, spare parts availability, and software updates for the JTLB Universal Projector Remote Control is not available in the provided product data. For any support inquiries, please refer to the retailer or manufacturer's contact information provided at the point of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.