CONTIA Replacement Parts Kit Instruction Manual

1. はじめに

This manual provides instructions for the installation and maintenance of your CONTIA replacement parts kit for Xiaomi Roborock and Xiaowa E20, E202, E202-00 robot vacuum cleaners. Regular replacement of wear-and-tear parts is essential for maintaining optimal cleaning performance and extending the lifespan of your robot vacuum.

2.製品コンポーネント

The CONTIA replacement parts kit (Set F) typically includes the following components:

• Main Brush (Roller Brush)
• Side Brushes (3-arm type)
• HEPAフィルター
• キャスターホイール
• メインブラシカバー

図2.1：以上view of the CONTIA replacement parts kit, showing the main brush, four side brushes, two HEPA filters, and four mop pads.

3.インストールガイド

Before installing any replacement parts, ensure your robot vacuum cleaner is powered off and disconnected from its charging base. Refer to your vacuum cleaner's original user manual for specific instructions on accessing component compartments.

3.1 Main Brush Installation

1. ロボット掃除機を裏返します。
2. Locate the main brush cover, usually secured by clips or latches.
3. Open or remove the main brush cover.
4. 古いメインブラシを取り外します。
5. Insert the new main brush, ensuring its ends align with the slots in the vacuum cleaner.
6. Close or reattach the main brush cover until it clicks into place.

図 3.1: 効果的なゴミ収集のために設計されたメインローラーブラシ。

3.2 サイドブラシの取り付け

1. ロボット掃除機を裏返します。
2. Locate the side brush(es), typically held by a screw.
3. 古いサイドブラシを回して取り外します。
4. Place the new side brush onto the post and secure it with the screw.

3.3フィルターの取り付け

1. ロボット掃除機のダストビンコンパートメントを開きます。
2. ゴミ箱を取り外します。
3. ゴミ箱のフィルターカバーを開きます。
4. 古いフィルターを取り外します。
5. Insert the new HEPA filter(s) into the designated slot, ensuring a snug fit.
6. Close the filter cover and reinsert the dustbin into the vacuum cleaner.

Figure 3.2: Two HEPA filters, designed to capture fine dust and allergens.

3.4 ホイールの取り付け

1. ロボット掃除機を裏返します。
2. Locate the caster wheel assembly.
3. Gently pull the old wheel assembly straight up to remove it.
4. Insert the new caster wheel assembly by pushing it firmly into the slot until it clicks into place.

Figure 3.3: The caster wheel, providing mobility and navigation for the robot vacuum.

3.5 Main Brush Cover Installation

1. Ensure the main brush is correctly installed.
2. Align the new main brush cover with its designated slot on the vacuum cleaner.
3. Press down firmly until the cover snaps into place, securing the main brush.

Figure 3.4: The main brush cover, protecting the main brush and securing it in place.

4. メンテナンス

Regular maintenance of your robot vacuum's parts is crucial for optimal performance. Consider the following:

• フィルターの交換: Filters should be replaced frequently (e.g., every 1-3 months, depending on usage) to maintain air quality and prevent reduced suction power.
• ブラシのクリーニング: Periodically remove and clean the main brush and side brushes to remove tangled hair and debris. This ensures effective cleaning and prevents motor strain.
• ホイールクリーニング： Check the caster wheel for any trapped debris that might hinder its movement.
• タイムリーな交換: Replace damaged or worn-out parts promptly to ensure the robot vacuum operates efficiently and to prolong its overall service life.

5。 トラブルシューティング

If you encounter issues after replacing parts, consider these general troubleshooting steps:

• 適合しない部品: Double-check that you have the correct replacement parts for your specific robot vacuum model (Xiaomi Roborock/Xiaowa E20, E202, E202-00).
• パフォーマンスの低下: Ensure all parts are installed correctly and securely. A loose brush or clogged filter can impact cleaning efficiency.
• 異常な音: Verify that no debris is caught in the brushes or wheels, and that all parts are properly seated.

If problems persist, refer to your robot vacuum's original user manual or contact the seller for further assistance.

6. 仕様

7. 保証とサポート

This product is provided without a specific warranty. For any questions regarding the installation or compatibility of these replacement parts, please contact the seller directly through your purchase platform.