1. セットアップ
Before first use, ensure the Lydsto P1 MINI Robotic Pool Vacuum is fully charged. Connect the power adapter to the charging port located on the underside of the unit. The indicator light will show charging status.
Figure 1: Charging the Lydsto P1 MINI Robotic Pool Vacuum. Ensure the unit is fully charged before initial operation.
The unit features an easy assembly design. Secure the top cover to the chassis using the four durable fasteners. Attach the floating cap to the designated slot on the top of the cleaner. This cap helps with retrieval.
Figure 2: Easy assembly design, fastening the top cover to the chassis with 4 durable fasteners.
For a visual guide on unboxing and initial setup, please refer to the video below.
Video 1: Unboxing and initial setup guide for the Lydsto P1 MINI Robotic Pool Vacuum. This video demonstrates how to prepare the cleaner for its first use.
2. 操作
The Lydsto P1 MINI is designed for efficient cleaning of flat-bottomed inground and above-ground pools up to 35 feet. It features smart water sensor technology and dual-drive motors for effective debris collection.
Figure 3: The Lydsto P1 MINI Robotic Pool Cleaner operating in a pool.
クリーナーの開始
- クリーナーが完全に充電されていることを確認してください。
- Place the cleaner into the pool. It is crucial to submerge the unit completely before activating it.
- Once fully submerged, press the power button located on the underside of the unit. The cleaner will begin its cleaning cycle.
Figure 4: Activating the power button on the underside of the cleaner once fully submerged in water.
クリーニングサイクル
The Lydsto P1 MINI operates for approximately 60 minutes on a full charge. It utilizes a 250µm high-precision filtration system to intercept particulate matter, leaves, stones, and other debris. Front and rear scrapers provide synchronous cleaning, efficiently removing dirt from the pool bottom.
Figure 5: The cleaner's front and rear scrapers ensure synchronous and efficient cleaning.
The auto-steering technology ensures comprehensive coverage. When the robot encounters a wall, it automatically changes its direction to continue cleaning.
Figure 6: Auto-steering technology allows the robot to change direction upon contact with pool walls.
Observe the cleaner in action:
Video 2: Demonstration of the Lydsto P1 MINI Robotic Pool Vacuum's cleaning effectiveness in a pool.
Video 3: A short demonstration highlighting the ease of use of the Lydsto P1 MINI Pool Cleaner.
Retrieving the Cleaner
Once the cleaning cycle is complete or the battery is low, the cleaner will typically float to the surface or a shallow area. Use the provided retrieval hook to safely pull the unit out of the water.
Figure 7: Safely retrieving the lightweight Lydsto P1 MINI from the pool using the provided hook.
3. メンテナンス
Regular cleaning of the filter is essential to maintain optimal performance of your Lydsto P1 MINI Robotic Pool Vacuum.
フィルターの清掃
- After each use, remove the top cover of the cleaner by unlatching the fasteners.
- Carefully lift out the filter basket.
- フィルターバスケットをホースで徹底的にすすぎ、集まったゴミをすべて取り除きます。
- Reassemble the filter basket and top cover, ensuring all fasteners are securely latched.
Figure 8: Rinsing the filter basket to remove debris after use.
4。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| クリーナーが起動しません。 | Low battery or not powered on. | Ensure the unit is fully charged. Press the power button only after the unit is fully submerged in water. |
| 洗浄性能が悪い。 | Clogged filter or debris in suction ports. | Clean the filter basket thoroughly. Check and clear any obstructions from the suction ports. |
| クリーナーが頻繁に詰まってしまいます。 | Uneven pool bottom (wrinkles) or large obstacles. | The cleaner is designed for flat-bottomed pools. Manually assist if it gets stuck on wrinkles. Remove large obstacles from the pool. |
| クリーナーが途中で停止します。 | 電池が消耗しています。 | Recharge the unit. A full charge provides approximately 60 minutes of operation. |
5. 仕様
- モデル名: P1 MINI
- 商品モデル番号: P1 MINI-FH
- 特集: コードレス
- 制御方法: App (Note: Product specifications list 'App' control, but operational videos primarily show manual button activation. Please refer to the product packaging for definitive control methods.)
- 巻tage: 11.4 ボルト (DC)
- リチウム電池容量tage: 11.4 ボルト (DC)
- リチウム電池のエネルギー内容: 24.84ワット時
- 電池の数: 3 AAA batteries required (included) (Note: These AAA batteries are likely for a remote control or indicator, not the main power source for the robotic cleaner.)
- バッテリーの説明: Alkaline (for AAA batteries)
- インストールタイプ: プラグアンドプレイ
- 製品寸法: 15.98 x 15.55 x 9.8インチ
- 商品の重量: 11.68ポンド
- 材料： プラスチック
- 色： 白
- 電源: 電池駆動
- 効率： 高い
6. 保証
The Lydsto P1 MINI Robotic Pool Vacuum comes with a 限定保証. For specific terms and conditions, please refer to the warranty card included in your product packaging or visit the official Lydsto webサイト。
7. サポート
For further assistance, product inquiries, or technical support, please visit the official Lydsto webメーカーのウェブサイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。連絡先は通常、製品のパッケージまたはメーカーのウェブサイトに記載されています。 webサイト。
Lydsto Official Store: Visit Lydsto Store on Amazon