導入
This manual provides essential information for the installation, operation, and maintenance of your KPREPUBLIC Kailh Box Ice Cream Brown Switches. These switches are designed for mechanical keyboards, offering a pre-advanced tactile feel with durable POM housing and stem materials.
製品終了view
セットアップとインストール
These switches are designed for mechanical keyboards that support hot-swappable switches or require soldering for installation. Ensure your keyboard is compatible before proceeding.
For Hot-Swappable Keyboards:
- キーボードを準備します。 Ensure your keyboard is powered off and unplugged from your computer.
- 既存のキーキャップを削除します。 Use a keycap puller to carefully remove the keycaps from the switches you intend to replace.
- Remove existing switches: Use a switch puller tool to gently unclip and pull out the old switches from the PCB. Apply even pressure to avoid bending pins.
- Install new switches: Align the pins of the KPREPUBLIC Kailh Box Ice Cream Brown Switch with the holes on the PCB. Gently push the switch down until it clicks into place. Ensure the pins are straight and not bent.
- Test switches: Before replacing keycaps, plug in your keyboard and test each new switch to ensure it registers correctly.
- Reattach keycaps: Once all switches are installed and tested, reattach your keycaps.
For Soldering Installation:
- Prepare your PCB: Ensure your keyboard PCB is clean and ready for soldering.
- Position switches: Insert the KPREPUBLIC Kailh Box Ice Cream Brown Switches into the designated spots on the PCB. Ensure they sit flush.
- Solder pins: Carefully solder each pin of the switch to the corresponding pad on the PCB. Use appropriate soldering techniques to ensure strong, clean connections.
- Test and assemble: After soldering, test the switches for functionality. Then, proceed with assembling the keyboard case and attaching keycaps.
運営原則
The KPREPUBLIC Kailh Box Ice Cream Brown Switch is a 触覚的な mechanical switch. This means it provides a noticeable bump during the keypress, indicating actuation, without producing an audible click sound. This tactile feedback is designed to enhance typing accuracy and feel.
- 作動: The switch actuates (sends a signal to the keyboard) when the stem travels approximately 2.0mm.
- Tactile Bump: The tactile bump occurs before the actuation point, providing feedback that the keypress has registered.
- Reset Point: The switch resets and is ready for another press when the stem returns to its original position.
- 主な旅行： The total distance the stem can travel is 3.6mm.
メンテナンスとケア
Proper maintenance can extend the lifespan and maintain the performance of your switches.
- 定期清掃: 定期的にキーキャップを取り外し、圧縮空気を使ってスイッチ周辺の埃やゴミを取り除いてください。柔らかいブラシも使用できます。
- 液体のこぼれを避ける: Liquids can damage the internal components of the switches. In case of a spill, immediately unplug the keyboard, remove keycaps, and allow it to dry completely before re-use. For severe spills, professional cleaning or switch replacement may be necessary.
- 潤滑（オプション）: For advanced users, switches can be carefully disassembled and lubricated with specialized switch lubricants to alter their feel and sound. This should only be attempted by experienced individuals as improper lubrication can degrade performance.
- 優しい取り扱い: When installing or removing switches, always use appropriate tools and apply gentle, even pressure to avoid bending pins or damaging the switch housing.
トラブルシューティング
If you encounter issues with your KPREPUBLIC Kailh Box Ice Cream Brown Switches, consider the following:
- スイッチが登録されない:
- Ensure the switch is fully seated in the hot-swap socket or properly soldered.
- Check for bent pins on the switch. If a pin is bent, carefully straighten it with tweezers before reinserting.
- Test the switch in another socket if possible to rule out a PCB issue.
- 一貫性のない感触/音:
- This can sometimes be due to manufacturing variations, but also check for debris inside the switch.
- Ensure the keycap is properly seated and not rubbing against the switch housing or adjacent keycaps.
- If you have lubricated the switches, ensure even application.
- Keycap Wobble:
- Some keycap wobble is normal. Excessive wobble might indicate a loose keycap stem or a slightly loose switch stem.
- Try a different keycap to see if the issue persists.
If problems persist, contact KPREPUBLIC customer support for further assistance.
仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | KPREPUBLIC |
| モデル | Kailh Box Ice Cream Brown Switch |
| スイッチタイプ | Pre Advanced Tactile |
| トップハウジング材質 | ポム |
| 底部ハウジング材質 | ポム |
| ステム材質 | ポム |
| ばねの長さ | 約19mm |
| 操作力 | 37±10gf |
| ボトムフォース | 50±10gf |
| プレトラベル | 2.0±0.4mm |
| 総移動距離 | 3.6±0.4mm |
| 動作寿命 | 50万サイクル |
| 操作モード | 機械 |
| ターミナル | 貫通穴 |
| 取り付けタイプ | PCBマウント |
| 原産国 | 中国 |
保証情報
Warranty terms for KPREPUBLIC products are typically provided by the manufacturer or the point of purchase. Please refer to the documentation included with your purchase or visit the official KPREPUBLIC web保証の詳細については、ウェブサイトをご覧ください。保証請求の際に必要となる購入証明書を保管してください。
サポート
For technical support, product inquiries, or assistance with your KPREPUBLIC Kailh Box Ice Cream Brown Switches, please contact KPREPUBLIC directly through their official website or customer service channels. Provide your product model number and any relevant purchase details when seeking support.
メーカー: KPREPUBLIC
