導入
This manual provides instructions for the ACCUTIME Hello Kitty LED Digital Quartz Watch, Model HK4158AZ. This officially licensed LED watch features a digital display and a Hello Kitty themed design. It is designed for children and offers easy time reading. Please read this manual carefully before use to ensure proper operation and longevity of your watch.
製品終了view
The ACCUTIME Hello Kitty LED Digital Quartz Watch is a battery-powered timepiece featuring a clear digital display. Its design incorporates the beloved Hello Kitty character on both the watch face and the strap.
- デジタルディスプレイ： Shows time in an easy-to-read LED format.
- ハローキティデザイン： Features full Hello Kitty graphics on the strap and watch face.
- 耐久性のある構造: Plastic case and strap, suitable for children's daily wear.
図1: 前面 view of the Hello Kitty LED digital watch.
Figure 2: The Hello Kitty LED digital watch on a child's wrist.
設定
Before using your watch, please follow these steps:
- 初期アクティベーション: If your watch has a plastic tab protruding from the side button, gently pull and remove it. This tab prevents battery drain during storage.
- 表示を確認する: Press the button on the side of the watch. The time should illuminate on the LED display. If not, the battery may need to be activated or replaced (refer to Maintenance section).
図3：側面 view of the watch, highlighting the control button.
操作手順
Your watch has a single button for operation. The display will show the time for a few seconds and then turn off to conserve battery.
時刻を表示する
- Press the side button once to display the current time.
設定時間
デジタル時計の時刻を設定するには:
- サイドボタンを1回押すと時刻が表示されます。
- Immediately press and hold the button for approximately 3-5 seconds until the hour digits begin to flash.
- While the hour digits are flashing, press the button repeatedly to advance the hour. Release the button when the correct hour is displayed.
- 時間を設定した後、分の数字が点滅し始めるまでボタンを 3 ～ 5 秒間押し続けます。
- While the minute digits are flashing, press the button repeatedly to advance the minutes. Release the button when the correct minutes are displayed.
- The time is now set. The display will stop flashing and return to normal operation after a few seconds of inactivity.
メンテナンス
クリーニング
To clean your watch, wipe it gently with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or display.
耐水性
重要： この時計は 耐水性はありません. Avoid exposing the watch to water, moisture, or high humidity. This includes showering, swimming, or heavy rain, as water damage is not covered under warranty.
バッテリー交換
The watch is powered by one CR2032 (3V) battery. When the display becomes dim or stops working, it's time to replace the battery.
- Carefully turn the watch over to expose the stainless steel case back.
- Using a small screwdriver (not included), remove the screws securing the case back.
- Gently lift the case back to reveal the battery compartment.
- 古い CR2032 電池を取り外し、プラス (+) 側が上を向くように新しい電池を挿入します。
- Replace the case back and secure it with the screws. Do not overtighten.
注記： Battery replacement should ideally be performed by an adult. Dispose of old batteries responsibly.
図4：戻る view of the watch, showing the case back and battery information.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 時計の表示が空白です。 | Battery tab not removed or battery is dead. | Remove the plastic battery tab. If already removed, replace the CR2032 battery. |
| 時間が間違っています。 | 時間が正しく設定またはリセットされていません。 | Follow the "Setting Time" instructions in the Operating Instructions section. |
| ディスプレイが暗くなっています。 | バッテリー残量が少なくなりました。 | CR2032 電池を交換してください。 |
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | HK4158AZ |
| ブランド | アキュタイム |
| 表示タイプ | デジタルLED |
| 動き | 石英 |
| 電源 | Battery Powered (1 x CR2032 3V) |
| ケース素材 | プラスチック |
| ストラップ素材 | プラスチック |
| ケース直径 | 30ミリメートル |
| ケースの厚さ | 10ミリメートル |
| バンド幅 | 20ミリメートル |
| 留め具タイプ | タンバックル |
| 耐水性 | 耐水性はありません |
| 含まれるコンポーネント | Watch, Battery, Strap |
| 年齢範囲 | 子供 |
保証情報
This ACCUTIME Hello Kitty LED Digital Quartz Watch is backed by a one-year limited warranty from ACCUTIME Watch Corp. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or water damage due to the watch not being water resistant. Please retain your proof of purchase for warranty claims.
サポート
For further assistance or inquiries regarding your ACCUTIME Hello Kitty LED Digital Quartz Watch, please refer to the retailer where the product was purchased. For general product information, you may visit the official ACCUTIME webサイトをご覧いただくか、カスタマー サービス部門（存在する場合）にお問い合わせください。