ATOMSTACK FB2 Laser Engraver Enclosure User Manual

1.製品オーバーview

The ATOMSTACK FB2 Laser Engraver Enclosure is designed to provide a protective environment for your laser engraving machine. It features a foldable, fireproof, and dustproof design, incorporating an exhaust vent and pipe for odor and noise reduction. The enclosure also offers eye protection through its viewing windows and is compatible with most semiconductor laser engraving machines.

ATOMSTACK FB2 Laser Engraver Enclosure folded and unfolded with exhaust pipe

Image: The ATOMSTACK FB2 Laser Engraver Enclosure, shown both folded for portability and set up with an exhaust pipe connected, ready for use.

主な特徴:

寸法: 30" X 29" X 17" (approximate external dimensions)
材料： Multilayer composite material, lightweight, high density, fireproof.
換気： Integrated exhaust vent and pipe for smoke and odor reduction.
安全性： 目の保護 viewingウィンドウ。
デザイン： Foldable for easy storage and portability.
互換性: Designed for most semiconductor laser engraving machines.

2. パッケージ内容

組み立てを進める前に、パッケージにすべてのコンポーネントが揃っていることを確認してください。

Packing list for ATOMSTACK FB2 enclosure showing all components

画像: 詳細な view of the ATOMSTACK FB2 enclosure's packing list, including the protective box set, exhaust pipe, exhaust fan, DC12V power supply, metal mesh cover, throat hoop, flange fan, H3 Allen key, and flat-blade screwdriver.

1 x FB2 Protective Box Set
1xエキゾーストパイプ
1 x Exhaust Fan
1 x DC12V Power Supply
1 x Metal Mesh Cover
1 x Throat Hoop
1 x Flange Fan
1 x H3 Allen Key
1 x Flat-blade Screwdriver
M4*50 screws and nut combination (4 sets)
取扱説明書

3. セットアップ手順

Follow these steps to set up your ATOMSTACK FB2 Laser Engraver Enclosure.

3.1 Unfolding the Enclosure

Carefully remove the protective box from its packaging.
Unfold the protective box, ensuring the Velcro strips align to form the cubic structure. Secure all Velcro fasteners to maintain the box's shape.

Unfolding the ATOMSTACK FB2 enclosure and connecting cables

Image: A user unfolding the enclosure and connecting the necessary cables for the laser engraver inside.

3.2 排気システムの取り付け

Identify the exhaust fan and the fan flange. Note the arrow on the fan, which indicates the exhaust direction. This arrow should face outwards when installed.
Attach the fan flange to the exhaust fan using the provided M4*50 screws. Ensure a secure fit.
Insert the assembled fan and flange into the designated opening on the side of the enclosure. Secure it from the outside using the metal mesh cover and nuts. Tighten with the H2.5 hex key.
Attach one end of the exhaust pipe to the fan flange. Use the throat hoop and flat-blade screwdriver to tighten the connection, ensuring no air leaks.
Extend the exhaust pipe to a suitable outdoor ventilation point. The pipe can stretch up to 2 meters.
排気ファンにDC12V電源を接続します。

詳細 view of the ATOMSTACK FB2 enclosure's air inlet and exhaust fan

Image: Close-up of the enclosure's air inlet and the 7500RPM exhaust fan, illustrating the airflow path.

ATOMSTACK FB2 enclosure with extended smoke exhaust pipe

Image: The ATOMSTACK FB2 enclosure set up with its extended smoke exhaust pipe, demonstrating its reach for ventilation.

3.3 Video Guide for Installation

インストールプロセスの視覚的なガイドについては、次のビデオを参照してください。

Video: A step-by-step guide on how to install the ATOMSTACK FB2 Fireproof Protective Cover, demonstrating the assembly and connection of components.

4. 操作手順

This section outlines the general operating procedures for using the ATOMSTACK FB2 enclosure with your laser engraver.

配置: Place your laser engraver inside the unfolded enclosure. Ensure there is adequate space around the engraver for operation and air circulation. The enclosure provides a large space (approximately 740mm width x 760mm depth x 420mm height) compatible with most semiconductor laser engraving machines.
ケーブル管理 Route all necessary cables (power, USB, etc.) for your laser engraver through the designated openings in the enclosure.
電源オン: Connect the exhaust fan to its power supply and turn it on. Ensure the fan is operating correctly to create negative pressure and extract fumes.
彫刻工程： Close the top flap of the enclosure. Use the eye protection viewing windows to monitor the engraving process safely.
換気： Maintain continuous operation of the exhaust fan throughout the engraving process and for a short period afterward to clear any residual fumes.

ATOMSTACK FB2 enclosure dimensions and large internal space

Image: The ATOMSTACK FB2 enclosure highlighting its internal dimensions (740mm width, 760mm depth, 420mm height), demonstrating its large space for various laser engravers.

Video: A demonstration of the enclosure's effectiveness in odor and noise reduction during laser engraving operations.

5. 安全上の注意

Always operate your laser engraver in a well-ventilated area, even with the enclosure.
Ensure the exhaust pipe is properly connected and vented outdoors to prevent accumulation of smoke and fumes.
Never look directly at the laser beam, even through the protective windows, without additional certified laser safety glasses.
Keep the enclosure closed during operation to contain laser light, smoke, and debris.
Do not place flammable materials near the exhaust outlet.
手術エリアから子供やペットを遠ざけてください。

Children playing near a laser engraver without an enclosure (incorrect setup)

Image: Illustrates an unsafe setup with children near an exposed laser engraver, emphasizing the need for protective measures.

Laser engraver safely enclosed within the ATOMSTACK FB2 enclosure

Image: Shows a laser engraver safely contained within the ATOMSTACK FB2 enclosure, demonstrating proper usage for safety.

6. メンテナンス

クリーニング： Regularly wipe down the interior and exterior of the enclosure with a damp 布で埃やゴミを拭き取ってください。研磨剤入りの洗剤は使用しないでください。
ファンの検査: Periodically check the exhaust fan for any obstructions or signs of wear. Ensure it operates smoothly.
パイプ検査: Inspect the exhaust pipe for any kinks, tears, or blockages that could impede airflow.
ストレージ： When not in use, the enclosure can be folded for compact storage. Ensure it is clean and dry before folding.

7。トラブルシューティング

問題	考えられる原因	解決
Excessive smoke/odor inside enclosure	Exhaust fan not running Exhaust pipe blocked or kinked Loose connections in exhaust system Enclosure not fully sealed	Check fan power connection and switch. Inspect exhaust pipe for obstructions and clear them. Tighten all connections (fan flange, throat hoop). Ensure all Velcro fasteners are securely closed.
Enclosure does not hold its shape	Velcro fasteners not properly aligned or secured Internal support structure dislodged	Re-align and secure all Velcro fasteners. Check internal frame components for proper seating.
Fan is noisy or vibrating excessively	Loose fan mounting screws ファンブレードの破片ファンモーターの問題	Tighten fan mounting screws. Carefully inspect and remove any debris from fan blades (ensure power is disconnected). 問題が解決しない場合は、カスタマーサポートにお問い合わせください。

8. 仕様

モデル： FB2
梱包時の寸法: 32.68 x 22.44 x 5.12インチ
内部作業エリア: Approximately 740mm (width) x 760mm (depth) x 420mm (height)
商品の重量: 15.82ポンド
色：黒
メーカー: アトムスタック
Exhaust Fan Speed: 7500 RPM (as indicated in images)
排気管長さ: Stretches up to 2 meters
材料： 900D Oxford cloth, Honeycomb, Flame retardant cloth (with silicone coating)

9. 保証とサポート

9.1 保証情報

Specific warranty details for the ATOMSTACK FB2 Laser Engraver Enclosure are not explicitly provided in the product specifications. Please refer to the official ATOMSTACK web包括的な保証条件については、サイトまたは購入書類をご覧ください。

9.2 カスタマーサポート

For any technical assistance, troubleshooting, or inquiries regarding your ATOMSTACK FB2 enclosure, our professional technical and support teams are available 24/7 to answer your questions. Please visit the official ATOMSTACK web連絡先情報とサポートリソースのサイト。

ATOMSTACK公式ストア: ストアを訪問

ATOMSTACK FB2