Greluma PIRモーションセンサーライトスイッチ（モデルZL779LUM）ユーザーマニュアル

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your Greluma PIR Motion Sensor Light Switch, Model ZL779LUM. This device is designed to automatically control lighting based on detected motion and ambient light levels, suitable for both indoor and outdoor applications.

画像1：正面 view of the Greluma PIR Motion Sensor Light Switch.

2. 安全情報

• 電気による危険: Installation must be performed by a qualified electrician or knowledgeable individual. Ensure power is disconnected at the circuit breaker before installation.
• 巻tage: This device operates on AC220V-240V. Do not connect to other voltage用品。
• 屋外での使用: When installing outdoors, ensure the unit is protected from direct water exposure and extreme weather conditions to prevent damage and ensure safety.
• 取り付け: Securely mount the sensor to a stable surface according to installation guidelines.

3 製品の特徴

• 広い検出範囲: Optimal motion detection with a 180° working range and up to 12m detection distance.
• エネルギー効率: Utilizes passive infrared technology to detect moving objects, minimizing heat generation and conserving energy.
• 調整可能な光センサー（LUX）： Configurable ambient light threshold (3-2000lux) for day and night operation.
• 調整可能な時間遅延： Customizable delay time from 7 seconds to 7 minutes. Continuous induction resets the timer.
• 多用途なアプリケーション: Suitable for various locations including garages, hallways, basements, staircases, kitchens, wardrobes, and lofts.

4. 仕様

Image 2: Illustration of detection range (12m), angle (180°), and recommended installation height (1-2.5m).

Image 3: Technical drawing showing the dimensions of the Greluma PIR Motion Sensor (86mm, 78mm, 98mm, 69mm, 43.5mm).

5. セットアップとインストール

5.1。 インストール前のチェックリスト

• Ensure power is turned OFF at the main circuit breaker.
• 供給量を確認するtage is AC220V-240V.
• Select a suitable mounting location, ideally between 1 to 2.5 meters high, to achieve the specified detection range and angle.
• Avoid mounting near heat sources, air conditioning vents, or in direct sunlight, as these can cause false triggers.

5.2.配線手順

1. センサーcを慎重に開けるasin配線端子にアクセスするにはgを使用します。
2. Connect the Live (L) wire from the power supply to the 'L' terminal on the sensor.
3. Connect the Neutral (N) wire from the power supply to the 'N' terminal on the sensor.
4. Connect the load (e.g., light fixture) to the 'OUT' terminal on the sensor. The other side of the load should connect to the Neutral (N) wire.
5. すべての接続が安全で絶縁されていることを確認してください。
6. センサーcを閉じるasin安全に。

画像4: 内部 view of the sensor with wiring terminals and a schematic diagram for connecting to a light load. (N: Neutral, L: Live, OUT: Load Output).

5.3. 取り付け

• Use the provided screws to securely attach the sensor to the chosen wall or ceiling surface.
• Adjust the sensor head to cover the desired detection area. The sensor offers a 180° detection angle.

6. 操作手順と調整

After successful installation and power restoration, the sensor will enter a warm-up period (typically 30-60 seconds) during which it may cycle on and off. After this, it will be ready for adjustment.

Image 5: Close-up of the adjustment knobs for TIME and LUX settings.

6.1. TIME Adjustment

The "TIME" knob controls how long the connected light remains on after motion is detected and then ceases. It can be adjusted from approximately 7 seconds to 7 minutes.

• Turn the knob towards the '–' symbol for a shorter delay.
• Turn the knob towards the '+' symbol for a longer delay.
• If the sensor detects motion again before the set time delay expires, the timer will reset and restart the countdown.

6.2. LUX Adjustment

The "LUX" knob determines the ambient light level at which the sensor will activate the connected light. This allows the sensor to operate only when natural light is insufficient.

• "Sun" Position (Max LUX): センサーは周囲の光に関係なく、昼夜を問わず動作します。
• "Moon" Position (Min LUX): The sensor will only activate when the ambient light level falls below approximately 3 Lux (i.e., in dark conditions).
• Adjust the knob to your desired operating condition. For testing during daylight, set it to the "Sun" position.

7. アプリケーション

Greluma PIR モーションセンサー ライト スイッチは汎用性が高く、さまざまな設定で使用して利便性とエネルギー効率を高めることができます。

• 屋内使用: Ideal for garages, hallways, basements, staircases, kitchens, wardrobes, and lofts where automatic lighting is beneficial.
• 屋外での使用: Suitable for outdoor areas such as patios, entryways, or garden paths, provided it is installed in a protected location.

図6: 視覚的例amples of the sensor installed in a parlor and an outdoor setting.

8. メンテナンス

• クリーニング： センサーレンズは、検出を妨げる可能性のあるほこりやゴミを取り除くため、定期的に柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
• 検査： 定期的にcの損傷の兆候がないか確認してくださいasing or wiring. If damage is found, disconnect power and consult a qualified technician.
• 環境要因: Ensure the sensor remains free from obstructions and is not exposed to excessive moisture or extreme temperatures beyond its operating limits.

9。 トラブルシューティング

10. 保証とサポート

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Greluma customer service through their official channels. Keep your purchase receipt as proof of purchase.