Novilla N-F12006-F-GR-New

Novilla Full Size Lift Up Storage Bed Instruction Manual

Model: N-F12006-F-GR-New

1. はじめに

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Novilla Full Size Lift Up Storage Bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This bed frame features a hydraulic lift mechanism for convenient under-bed storage and a comfortable fabric headboard, designed to eliminate the need for a box spring.

Novilla Full Size Lift Up Storage Bed in a bedroom setting

Image: The Novilla Full Size Lift Up Storage Bed with its upholstered headboard and base.

2. 安全情報

  • 損傷を防ぐために、ベッドフレームは常に柔らかく清潔な表面の上で組み立ててください。
  • 組み立て前に、すべての部品が揃っていて損傷がないことを確認してください。損傷した部品は使用しないでください。
  • Tighten all screws and bolts securely, but do not overtighten. Recheck tightness periodically.
  • Keep children and pets away from the bed frame during assembly and when operating the hydraulic lift mechanism.
  • The hydraulic lift mechanism is powerful. Use both hands to lift and lower the mattress platform. Ensure hands and fingers are clear of pinch points.
  • ベッドフレームの最大重量容量 1000 ポンドを超えないようにしてください。
  • Only lower the gas lift after the slats are installed.

3. パッケージ内容

Please verify that all components listed below are present before beginning assembly. Refer to the included parts diagram for visual identification.

  • 布張りヘッドボードパネル
  • 布張りのサイドレール
  • Upholstered Footboard Panels
  • Hydraulic Lift Mechanisms (2 sets)
  • 金属フレーム部品（各種バーおよびコネクタ）
  • Wood Slats and Slat Holders
  • マットレス固定バー
  • Fabric Bottom Cover
  • Assembly Hardware (screws, bolts, washers, Allen wrench, spanner)

4. 組み立て手順

Follow these steps carefully for proper assembly. An assembly video is provided below for visual guidance.

Video: Novilla Lift Up Storage Bed Assembly Guide. This video demonstrates the step-by-step process for assembling the bed frame, including attaching the headboard, side rails, hydraulic mechanisms, and slats.

段階的な組み立て:

  1. Assemble the Headboard Base: Connect the lower headboard panels (parts 1, 2, 3, 4) using the specified screws (A, B). Ensure they are securely fastened.
  2. Attach Side Rails to Headboard Base: Connect the side rail components (parts 5, 6, 8) to the assembled headboard base using screws (A, C, E).
  3. Install Hydraulic Mechanism Supports: Attach the metal support bars (parts 9, 10, 11, 12, 13) for the hydraulic lift mechanism to the side rails using screws (G).
  4. Connect Side Rails to Footboard: Attach the side rails to the footboard (part 7) using bolts (D). Ensure the frame is square before fully tightening.
  5. Secure Hydraulic Mechanisms: Install the hydraulic lift mechanisms (part 21) to the bed frame using screws (F, H). Attach the mattress retainer (part 22) to the footboard.
  6. Attach Crossbars to Hydraulic Mechanism: Connect the crossbars (part 16) to the hydraulic lift mechanism using screws (F).
  7. Install Central Support Bars: Attach the central support bars (part 17) to the hydraulic mechanism.
  8. Assemble Main Support Beam: Connect the two halves of the main support beam (parts 15, 23) by sliding them together.
  9. Attach Main Support Beam to Frame: Secure the assembled main support beam to the bed frame.
  10. Connect Additional Crossbars: Attach additional crossbars (parts 18, 19) to the main support beam using screws (F).
  11. Install Remaining Crossbars: Connect the remaining crossbars (parts 14, 18) to the frame using screws (F).
  12. Install Fabric Bottom Cover: Attach the fabric bottom cover (part 28) to the inside of the bed frame using the Velcro strips. This creates the base for the storage area.
  13. Insert Wood Slats: Place the slat holders (part 25) onto the metal frame. Insert the wood slats (part 27) into the holders. Ensure all slats are evenly spaced and securely seated.
  14. Attach Mattress Retainer Strap: Secure the mattress retainer strap (part 29) to the bed frame. This prevents the mattress from sliding when the lift mechanism is engaged.

5. 操作手順

Using the Hydraulic Lift Storage:

Your Novilla bed frame features a hydraulic lift mechanism for easy access to under-bed storage. This mechanism is designed to assist in lifting the mattress and platform, making storage convenient.

  1. 持ち上げるには: Stand at the foot of the bed. Grasp the mattress retainer strap or the edge of the mattress platform firmly. With a controlled motion, lift the platform upwards. The hydraulic pistons will engage and assist in raising the platform, holding it securely in the open position.
  2. 下げるには: Ensure the storage area is clear of obstructions and that no one is underneath the bed. Grasp the mattress retainer strap or the edge of the mattress platform. Gently pull the platform downwards. You may need to apply some downward force to overcome the hydraulic resistance initially. Guide the platform smoothly until it rests fully on the bed frame.
Bed frame with mattress lifted, revealing amp下の収納スペース

Image: The bed frame with the mattress platform lifted, showcasin広々としたベッド下の収納スペース。

Close-up of the hydraulic lift mechanism supporting the bed platform

画像: 詳細な view of the high-quality pneumatic lever, designed for smooth and easy lifting and lowering of the bed platform.

6. メンテナンス

  • 生地のクリーニング： For general cleaning, vacuum the upholstered fabric regularly using a soft brush attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner according to the product instructions, testing on an inconspicuous area first.
  • フレームのお手入れ: Wipe the metal frame components with a soft, damp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や刺激の強い化学薬品は使用しないでください。
  • ハードウェアチェック: すべてのボルトとネジがしっかりと締まっているか定期的に確認してください。安定性を維持し、きしみ音を防ぐために、必要に応じて締め直してください。
  • 油圧機構： The hydraulic pistons are designed for long-term use and generally require no maintenance. If you notice any issues with lifting or lowering, ensure no obstructions are present. Do not attempt to disassemble or repair the hydraulic pistons yourself.

7。 トラブルシューティング

問題考えられる原因解決
Difficulty lifting/lowering the mattress platform.Hydraulic pistons not fully engaged or too much weight on the platform.Ensure the mattress is within the recommended weight range. Apply firm, even pressure when lifting/lowering. If the issue persists, contact customer support.
Bed frame is unstable or squeaks.Loose hardware or uneven assembly.すべてのボルトとネジを点検し、締め付けてください。ベッドフレームが水平な場所にあることを確認してください。
Mattress slides when platform is lifted.Mattress retainer bar not installed or loose.Verify the mattress retainer bar is correctly installed and securely fastened at the foot of the bed.
部品が欠品または破損しています。配送中の破損または梱包ミス。Do not proceed with assembly. Contact Novilla customer support immediately for replacement parts.

8. 仕様

  • モデル番号: N-F12006-F-GR-New
  • サイズ： 満杯
  • 製品寸法: 長さ78.54インチ x 幅57.48インチ x 高さ43.3インチ
  • 色： グレー
  • 材料： 木材、金属、布
  • 重量容量: 最大1000ポンド
  • 推奨マットレスの厚さ: 8-12 inches (no box spring needed)
  • 特集: Tufted Fabric Headboard, Hydraulic Lift Storage
Diagram showing the dimensions of the Novilla Full Size Lift Up Storage Bed

Image: Detailed dimensions of the Novilla Full Size Lift Up Storage Bed.

9. 保証とサポート

Novilla is committed to providing high-quality products. For any questions, concerns, or assistance with your product, please refer to the following:

  • カスタマーサポート: For direct assistance, please visit the official Novilla store or contact their customer service channels.
  • 保証情報: Details regarding product warranty are typically provided with your purchase documentation or can be found on the official Novilla webサイト。
  • 戻り値: This product typically qualifies for a 90-day easy return policy. Please check your purchase details for specific terms.

詳細については、 Novilla Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.